Solar-boosted photo-technology stands out as a powerful strategy for photosynthesis and photocatalytic processes due to its minimal energy requirements, cost-effectiveness and operation under milder, environmentally friendly conditions compared to conventional thermocatalytic options. The design and development of photocatalysts have received a great deal of attention, whereas photoreactor development must be studied deeper to enable the design of efficient devices for practical exploitation. Furthermore, scale-up issues are important for this application, since light distribution through the photoreactor is a concurrent factor. This review represents a comprehensive study on the development of photoreactors to be used mainly for the photoreduction of CO2 to fuels, but with concepts easily transferable to other photosynthetic applications such as ammonia synthesis and water splitting, or wastewater treatment, photovoltaics combined to photoreactors, etc. The primary categories of photoreactors are thoroughly examined. It is also explained which parameters influence the design of a photoreactor and next-generation high-pressure photoreactors are also discussed. Last but not least, current technologies for solar concentrators are recalled, considering their possible integration within the photoreactor. While many reviews deal with photocatalytic materials, in the authors’ view, photoreactors with significant scale and their merged devices with solar concentrators are still unexploited solutions. These are the key to boost the efficiency of these processes towards commercial viability; thus, the aim of this review is to summarise the main findings on solar photoreactors for the photoreduction of CO2 and for related applications.
Several Cu and Ni-based catalysts were synthetized over Ce-based supports, either pure or mixed with different amounts of alumina (1:2 and 1:3 mol/mol). Different metal loadings (10–40 wt%) and preparation methods (wet impregnation, co-precipitation, and flame-spray pyrolysis—FSP) were compared for the oxidative steam reforming of methanol. Characterization of the catalysts has been performed, e.g., through XRD, BET, XPS, TPR, SEM, and EDX analyses. All the catalysts have been tested in a bench-scale continuous setup. The hydrogen yield and methanol conversion obtained have been correlated with the operating conditions, metal content, crystallinity of the catalyst particles, total surface area, and with the interaction of the metal with the support. A Cu loading of 20% wt/wt was optimal, while the presence of alumina was not beneficial, decreasing catalyst activity at low temperatures compared with catalysts supported on pure CeO2. Ni-based catalysts were a possible alternative, but the activity towards the methanation reaction at relatively high temperatures decreased inevitably the hydrogen yield. Durability and deactivation tests showed that the best-performing catalyst, 20% wt. Cu/CeO2 prepared through coprecipitation was stable for a long period of time. Full methanol conversion was achieved at 280 °C, and the highest yield of H2 was ca. 80% at 340 °C, higher than the literature data.
In this work, three catalysts, TiO2, WO3 and TiO2/WO3, have been synthesized through flame spray pyrolysis synthesis (FSP) and have been tested for CO2 photoreduction. The catalysts were fully characterized by XRD, DRS UV–Vis, N2 physisorption and SEM. Experimental tests were performed in a one-of-a-kind high-pressure reactor at 18 bar. TiO2 P25 was used as a benchmark to compare the productivities of the newly synthetized catalysts. The two single oxides showed comparable productivities, both slightly lower than the P25 reference value (ca. 17 mol/kgcat·h). The mixed oxide, TiO2/WO3, instead showed an impressive productivity of formic acid with 36 mol/kgcat·h, which is around 2.5 times higher than both of the single oxides alone. The formation of a type-II heterojunction has been confirmed through DRS analysis. The remarkable productivity demonstrates how FSP synthesis can be a crucial tool to obtain highly active and stable photocatalysts. This approach has already been successfully scaled up for the industrial production of various catalysts, showcasing its versatility and efficiency.
The photoreduction of CO2 is a growingly interesting research topic due to the intriguing possibility of producing solar fuels from a concerning pollutant. TiO2 photocatalysts were the first materials used for this application, but since then, various strategies have been developed to optimise the catalytic performance and operating conditions to obtain competitive yield. This review presents the findings of the last decade of research on different semiconductors, TiO2 and g-C3N4 and their composites. The main features of the reaction and its key issues are first overviewed, focusing on the effect of different reaction conditions on the performance and recalling the mechanism of the reaction. The strategies developed to overcome the challenges of this demanding reaction are described in the following paragraphs, including the use of dopants or co-catalysts, heterojunctions between different semiconductors and the use of electron transfer mediators. Finally, some unifying concepts are summarised, suggesting the calculation of the stored energy amount and the relative efficiency to allow a safer comparison between literature data collected under widely variable conditions and leading to different products.
The photoreduction of CO2 is a growingly interesting research topic due to the intriguing possibility of producing solar fuels through a concerning pollutant. TiO2 photocatalysts were the first materials used for this application, but since then, various strategies have been developed to optimise the catalytic performance and operating conditions to obtain competitive yield. This review presents the findings of the last decade of research on dif-ferent semiconductors, TiO2 and g-C3N4 and their composites. The main features of the re-action and its key issues are first overviewed, focusing on the effect of different reaction conditions on the performance and recalling the mechanism of the reaction. The strategies developed to overcome the challenges of this demanding reaction are described in the fol-lowing paragraphs, including the use of dopants or co-catalysts, of heterojunctions be-tween different semiconductors and the use of electron transfer mediators. Finally, some unifying concepts are summarised, suggesting the calculation of the stored energy amount and the relative efficiency to allow a safer comparison between literature data collected under widely variable conditions and leading to different products.