This paper presents the design and performance evaluation of an experimental platform that emulates the static and dynamic behavior of a 3 kW Wind Energy Conversion System (WECS). The platform includes a wind turbine emulator (WTE) using a separately excited DC motor (SEDCM) as the prime mover, coupled with a grid-connected doubly-fed induction generator (DFIG). This setup enables comprehensive laboratory studies of a WECS without the need for large-scale field installations. A novel inertia compensation strategy is implemented to ensure the SEDCM accurately replicates the power and torque characteristics of a real wind turbine across various wind profiles. The DFIG was chosen for its high efficiency at variable wind speeds and its reduced power converter requirements compared to other generators. The control strategy for the DFIG is detailed, highlighting its performance and seamless integration within the system. Unlike most studies focusing on generators connected to simple loads, this research considers a grid-connected system, which introduces additional challenges and requirements. This study thoroughly investigates the grid-connected converter, addressing specific demands for grid connection and ensuring compliance with grid standards. Experimental results validate the effectiveness of the emulator, demonstrating its potential as a key tool for optimizing wind turbine control strategies and real-time algorithm validation, and enhancing the performance and reliability of renewable energy systems.

In this article, a frequency-adaptive neural network-based virtual flux (FANN-VF) estimator is developed for sensorless control of a pulsewidth modulation converter under unbalanced and distorted grid conditions. This method exploits two parallel FANNs configured as quadrature signal generators. The VF fundamental positive and negative sequence components` are inherently separated in the estimator without employing any cascaded filters. A frequency-locked loop is introduced to accurately track the frequency variations. The estimated VF PNSCs are directly exploited to compute the power references in VF-based predictive direct power control scheme. The developed strategy ensures constant active power and sinusoidal current waveforms under nonideal grid conditions. Simulation and experimental tests are performed to verify the effectiveness of the proposed method.

In response to the high performance requirements of pulse width modulation (PWM) converters in grid-connected power systems, H-Infinity (H∞) control has attracted significant research interest due to its robustness against parameter variations and external disturbances. In this work, an advanced robust H∞ control is proposed for a grid-connected three-phase PWM rectifier. A two-level control strategy is adopted, where cascaded H∞ controllers are designed to simultaneously regulate the DC bus voltage and input currents even under load disturbances and non-ideal grid conditions. As a result, unit power factor, stable DC bus voltage, and sinusoidal input currents with lower harmonics can be accurately achieved. The design methodology and stability of the proposed controller are verified through a comprehensive analysis. Simulation tests and experimental implementation on a dSPACE 1103 board demonstrate that the proposed control scheme can effectively enhance disturbance rejection performance under various operating conditions.

The rapid evolution of modern power systems, driven by the large-scale integration of renewable energy sources and the emergence of smart grids, presents new challenges in maintaining grid stability, power quality, and control reliability. As critical interfacing elements, three-phase pulse width modulation (PWM) converters must now ensure resilient and efficient operation under increasingly adverse and dynamic grid conditions. This paper proposes an adaptive neural network-based virtual flux (VF) estimator for sensorless predictive direct power control (PDPC) of PWM converters under nonideal grid voltage conditions. The proposed estimator is realized using an adaptive linear neuron (ADALINE) configured as a quadrature signal generator, offering robustness against grid voltage disturbances such as voltage unbalance, DC offset and harmonic distortion. In parallel, a PDPC scheme based on the extended pq theory is developed to reject active-power oscillations and to maintain near-sinusoidal grid currents under unbalanced conditions. The resulting VF-based PDPC (VF-PDPC) strategy is validated via real-time simulations on the OPAL-RT platform. Comparative analysis confirms that the ADALINE-based estimator surpasses conventional VF estimation techniques. Moreover, the VF-PDPC achieves superior performance over conventional PDPC and extended pq theory-based PDPC strategies, both of which rely on physical voltage sensors, confirming its robustness and effectiveness under non-ideal grid conditions.

The widespread development of medium-voltage and high-voltage direct current transmission systems has highlighted the modular multilevel converter (MMC) as a crucial enabling technology. However, the overall performance and lifetime of the MMC strongly depend on the integrity of its submodules (SMs), making online capacitance condition monitoring a critical requirement. Unlike recent related studies that rely on computationally heavy matrix-based algorithms or “black-box” artificial neural networks requiring massive offline training datasets, this paper proposes a parametric, adaptive linear neuron network. Mapped directly to the physical equations of the MMC, the method simultaneously exploits the arm current, SM switching state, and capacitor voltage to identify online parametric variations caused by aging or harsh conditions. The proposed scheme is fully non-intrusive, requiring no additional hardware sensors or signal injections, thereby reducing implementation complexity. The simulation results obtained in MATLAB/Simulink (vR2024b) demonstrate the method’s fast convergence and a quantified steady-state estimation error within ±1%. Furthermore, the estimator exhibits strong robustness under severe operating conditions, successfully maintaining accuracy during a 20% capacitance reduction, a 100% active power step variation, dc-link voltage fluctuations, measurement noise, grid unbalances, and harmonic perturbations.