Ntmitrii Gyrichidi

Mr. Ntmitrii Gyrichidi

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 May 2024 in Sensors
Verified
Journal Article
Open access
PDF file
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
Alexey RomanovAlexey Romanov
Alexey Romanov
OTOleg Trofimov
Oleg Trofimov
Stanislav EroshenkoStanislav Eroshenko
Stanislav Eroshenko
Pavel V. MatreninPavel V. Matrenin
Pavel V. Matrenin
Alexandra KhalyasmaaAlexandra Khalyasmaa
Alexandra Khalyasmaa
One of the key challenges in Multi-Spectral Automatic Diagnostic (MAD) robot design is the precise targeting of narrow-angle cameras on a specific part of the equipment. The paper shows that a low-cost MAD robot, whose navigation system is based on open-source ArduRover firmware and a pair of low-cost Ublox F9P GNSS receivers, can inspect the 8 × 4 degree ultraviolet camera bounding the targeting error within 0.5 degrees. To achieve this result, we propose a new targeting procedure that can be implemented without any modifications in ArduRover firmware and outperforms more expensive solutions based on LiDAR SLAM and UWB. This paper will be interesting to the developers of robotic systems for power equipment inspection because it proposes a simple and effective solution for MAD robots’ camera targeting and provides the first quantitative analysis of the GNSS reception conditions during power equipment inspection. This analysis is based on the experimental results collected during the inspection of the overhead power transmission lines and equipment inspections on the open switchgear of different power plants. Moreover, it includes not only satellite, dilution of precision, and positioning/heading estimation accuracy but also the direct measurements of angular errors that could be achieved on operating power plants using GNSS-only camera targeting.

18 December 2022 in Robotics
Verified
Journal Article
Open access
PDF file
Alexey RomanovAlexey Romanov
Alexey Romanov
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
MRMikhail P. Romanov
Mikhail P. Romanov
Modern electrical grippers have lower life-cycle costs compared to pneumatic ones. Furthermore, they provide force control, making it possible to grasp objects with different fragility using a single device. At the same time, electrical grippers have a higher end-effector weight, installed on the robot’s flange and lower closing speed, preventing them from replacing pneumatic solutions in high dynamic Pick and Place applications. This research faces both issues by synthesizing a novel gripper mechanism based on a Torque Distribution Gearbox, which makes it possible to relocate the electric motors to the static frame of a delta robot. The proposed gripper not only has a lower mass and a higher closing speed than competitive electric solutions, but it also provides unlimited rotation around the vertical axis. The performance of the gripper was tested in experimental studies, which showed that a created aluminum prototype provides a precise force control in the range from 3 N to 48 N with an accuracy not worse than 1.27 N. Moreover, its finger’s speed is 3.1–56 times higher than market available electrical grippers, which makes it comparable by this parameter with pneumatic solutions used in high dynamic Pick and Place applications.

15 April 2025 in Designs
Verified
Journal Article
Open access
PDF file
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
MRMikhail P. Romanov
Mikhail P. Romanov
YTYuri Yuryevich Tsepkin
Yuri Yuryevich Tsepkin
Alexey RomanovAlexey Romanov
Alexey Romanov
Quadrupedal robots are now not just prototypes as they were a decade ago. This field now focuses on finding new application areas for robots rather than solving pure locomotion problems. Although the price of quadrupedal robots has decreased significantly during the last decade, it is still relatively high and can be considered as one of the limiting factors for research, especially for multi-agent scenarios involving multiple robots. This paper proposes a simple and easily reproducible approach to integrating the cheapest robot from the Unitree Go1 series with controllers running the ArduPilot firmware without disassembling the robot itself or modifying its hardware. Experimental studies show that the average latency introduced by the proposed control method over Wi-Fi is 206.7 ms, and its standard deviation is below 53 ms, which is suitable for following the mission route using the Global Navigation Satellite System (GNSS). At the same time, control using Ethernet reduces mean latency down to 78.3 ms and provides additional functionality (e.g., the ability to configure step height). Finally, in the range of standard Go1 speeds, both proposed control interfaces, based on Wi-Fi and Ethernet, are suitable for most practical indoor and outdoor tasks.

3 October 2024 in Drones
Verified
Journal Article
Open access
PDF file
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
Alexandra KhalyasmaaAlexandra Khalyasmaa
Alexandra Khalyasmaa
Stanislav EroshenkoStanislav Eroshenko
Stanislav Eroshenko
Alexey RomanovAlexey Romanov
Alexey Romanov
Industrial inspection is a well-known application area for unmanned aerial vehicles (UAVs), but are modern market-available drones fully suitable for inspections of larger-scale industrial facilities? This review summarizes the pros and cons of aerial large-scale facility inspection, distinguishing it from other inspection scenarios implemented with drones. Moreover, based on paper analysis and additionally performed experimental studies, it reveals specific issues related to modern commercial drone software and demonstrates that market-available UAVs (including DJI and Autel Robotics) more or less suffer from the same problems. The discovered issues include a Global Navigation Satellite System (GNSS) Real Time Kinematic (RTK) shift, an identification of multiple images captured from the same point, limitations of custom mission generation with external tools and mission length, an incorrect flight time prediction, an unpredictable time of reaching a waypoint with a small radius, deviation from the pre-planned route line between two waypoints, a high pitch angle during acceleration/deceleration, an automatic landing cancellation in a strong wind, and flight monitoring issues related to ground station software. Finally, on the basis of the paper review, we propose solutions to these issues, which helped us overcome them during the first autonomous inspection of a 2400 megawatts thermal power plant.

25 September 2023
Verified
Conference Paper
Closed access
Alexey RomanovAlexey Romanov
Alexey Romanov
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
OTOleg V. Trofimov
Oleg V. Trofimov
Stanislav EroshenkoStanislav Eroshenko
Stanislav Eroshenko
ArduPilot, specifically ArduRover, is a widely used firmware for rapid prototyping ground and above-water mobile robots. For the last decade, it has progressed from a simple controller for Do-It-Yourself(DIY) projects to an ecosystem, including software and compatible hardware, successfully used in multiple industrial applications. This research presents the concept of an industrial-grade rover for automatic power equipment diagnostics based on the ArduPilot ecosystem and controlled via the standard Mission Planner software. The rover's control system includes a CUAV X7 controller running ArduRover firmware for navigation and mission program execution, a B&R X90 motion controller, and an Intel Core i7-based industrial computer to control multi-spectral cameras and store their data. Additionally, the robot is equipped with multiple communication channels, including a 1.4 GHz Mesh radio modem and an LTE transceiver. This part of the research presents a core concept of a scalable inspection robot's control system and software for generating its missions. In the next part, the advantages and disadvantages of this concept are discussed based on the operating experience of the robot's prototype during the inspection of 220 kV power equipment on multiple power plants.

25 September 2023
Verified
Conference Paper
Closed access
Alexey RomanovAlexey Romanov
Alexey Romanov
NGNtmitrii Gyrichidi
Ntmitrii Gyrichidi
OTOleg V. Trofimov
Oleg V. Trofimov
Stanislav EroshenkoStanislav Eroshenko
Stanislav Eroshenko
ArduPilot, specifically ArduRover, is a widely used firmware for rapid prototyping ground and above-water mobile robots. For the last decade, it has progressed from a simple controller for Do-It-Yourself(DIY) projects to an ecosystem, including software and compatible hardware, successfully used in multiple industrial applications. This paper presents the concept of an industrial-grade rover for automatic power equipment diagnostics based on the ArduPilot ecosystem and controlled via the standard Mission Planner software. The rover's control system includes a CUAV X7 controller running ArduRover firmware for navigation and mission program execution, a B&R X90 motion controller, and an Intel Core i7-based industrial computer to control multi-spectral cameras and store their data. Additionally, the robot is equipped with multiple communication channels, including a 1.4 GHz mesh radio modem and an LTE transceiver. This part of the paper describes the created prototype and discusses its advantages and disadvantages based on the operating experience during the inspection of 220 kV power equipment on several power plants.