The mechanical properties of metallic materials often degrade under harsh cryogenic conditions, posing challenges for low-temperature infrastructures1. Here we introduce a dual-scale atomic-ordering nanostructure, characterized by an exceptionally high number density of co-existing subnanoscale short-range ordering (approximately 2.4 × 1026 m−3) and nanoscale long-range ordering (approximately 4.5 × 1025 m−3) domains, within a metallic solid-solution matrix in a CoNiV-based alloy to improve the synergy of strength and ductility at low temperatures. We observe an ordering-induced increase in dislocation shear stress as well as a more rapid dislocation multiplication owing to the dislocation blocking effect of nanoscale long-range ordering and the associated generation of new dislocations. The latter effect also releases stress concentrations at nanoscale long-range-ordered obstacles that otherwise would promote damage initiation and failure. Consequently, the alloy shows a strength–elongation product of 76 GPa % with a yield strength of approximately 1.2 GPa at 87 K, outperforming materials devoid of such ordering hierarchy, containing only short-range ordered or coherent precipitates of a few tens of nanometres. Our results highlight the impact of dual co-existing chemical ordering on the mechanical properties of complex alloys and offer guidelines to control these ordering states to enhance their mechanical performance for cryogenic applications.
Fatigue failure is invariably the most crucial failure mode for metallic structural components. Most microstructural strategies for enhancing fatigue resistance are effective in suppressing either crack initiation or propagation, but often do not work for both synergistically. Here, we demonstrate that this challenge can be overcome by architecting a gradient structure featuring a surface layer of nacre-like nanolaminates followed by multi-variant twinned structure in pure titanium. The polarized accommodation of highly regulated grain boundaries in the nanolaminated layer to cyclic loading enhances the structural stability against lamellar thickening and microstructure softening, thereby delaying surface roughening and thus crack nucleation. The decohesion of the nanolaminated grains along horizonal high-angle grain boundaries gives rise to an extraordinarily high frequency (≈1.7 × 103 times per mm) of fatigue crack deflection, effectively reducing fatigue crack propagation rate (by 2 orders of magnitude lower than the homogeneous coarse-grained counterpart). These intriguing features of the surface nanolaminates, along with the various toughening mechanisms activated in the subsurface twinned structure, result in a fatigue resistance that significantly exceeds those of the homogeneous and gradient structures with equiaxed grains. Our work on architecting the surface nanolaminates in gradient structure provides a scalable and sustainable strategy for designing more fatigue-resistant alloys.
15 November 2020 in Metallurgical and Materials Transactions A
The post-dynamic recrystallization behavior of ultrafine-grained (UFG: 0.44 μm) cp-Ti under annealing, room temperature (RT) monotonic and cyclic loading was investigated across a range of temperatures and deformation rates wherever appropriate. By characterizing the grain and boundary structures, it was confirmed that recrystallization and grain growth occurred due to annealing (≥ 600 °C) and R = − 1 fatigue at RT. There was a noticeable 30 deg aggregation in misorientation distribution, along with the increased grain size. However, the hypothetical correlation between 30 deg aggregation and Σ13a or the other characteristic coincidence site lattice boundaries was found to be weak. The fatigue-induced grain growth is particularly intriguing for two reasons. First, the large monotonic deformation with low strain rate cannot trigger grain growth. Second, fatigue sharpened the basal intensity around the ND and caused a weaker texture component close to TD (load axis along the LD, perpendicular to the TD–ND plane). By contrast, high-temperature annealing only strengthened the UFG processing induced basal pole but without affecting its location. Novel insights into this fatigue-induced texture evolution in UFG cp-Ti has been provided. The lattice rotation during fatigue can be attributed to the combined effect of activation of prismatic $$ \langle a\rangle $$ slip parallel to LD, and basal $$ \langle a\rangle $$ slip perpendicular to it. The theoretically calculated stress to activate dislocation slip by assuming a non-equilibrium grain boundary state lent support to the above assertion. Moreover, the TEM observation evidently showed the characteristics of dislocation cross-slip and multiple slip in the grain interior. Graphical
2 July 2019 in Fatigue & Fracture of Engineering Materials & Structures