Nduduzo Lungisani Khumalo

Mr. Nduduzo Lungisani Khumalo

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
MSMusawenkosi G. Shange
Musawenkosi G. Shange
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson Masulubanye Mohomane
Samson Masulubanye Mohomane
TMTshwafo Motaung
Tshwafo Motaung
Cellulose/silica nanocomposites, synthesised through the sol–gel technique, have garnered significant attention for their unique properties and diverse applications. The distinctive characteristics of these nanocomposites are influenced by a range of factors, including the cellulose-to-silica ratio, precursor concentration, pH, catalysts, solvent selection, temperature, processing techniques, and agitation. These variables play a pivotal role in determining the nanocomposites’ structure, morphology, and mechanical properties, facilitating tailoring for specific applications. Studies by Raabe et al. and Barud et al. demonstrated well-deposited silica nanoparticles within the interstitial spaces of cellulosic fibres, achieved through TEOS precursor hydrolysis and the subsequent condensation of hydroxyl groups on the cellulose fibre surface. The introduction of TEOS established a robust affinity between the inorganic filler and the polymer matrix, emphasising the substantial impact of TEOS concentration on the size and morphology of silica nanoparticles in the final composites. The successful functionalisation of cellulose fibres with the TEOS precursor via the sol–gel method was reported, resulting in reduced water uptake and enhanced mechanical strength due to the strong chemical interaction between silica and cellulose. In research conducted by Feng et al., the silica/cellulose composite exhibited reduced weight loss compared to the pristine cellulose matrix, with the integration of silica leading to an elevated temperature of composite degradation. Additionally, Ahmad et al. investigated the effects of silica addition to cellulose acetate (CA) and polyethylene glycol membranes, noting an increase in Young’s modulus, tensile strength, and elongation at break with silica incorporation. However, concentrations exceeding 4% (w/v) resulted in significant phase separations, leading to a decline in mechanical properties.

10 July 2024 in Crystals
Verified
Journal Article
Open access
PDF file
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson Masulubanye Mohomane
Samson Masulubanye Mohomane
TMTshwafo Motaung
Tshwafo Motaung
This study highlights the advantages of employing acetylation to enhance the morphology and thermal properties of cellulose nanocrystals (CNCs) derived from maize stalks. Utilizing a green synthesis approach for CNC extraction, this research presents a novel comparison between green extracted CNCs, and their acid hydrolysed, followed by their acetylated counterparts (ACCNCs). This comparison reveals significant improvements in the properties of acetylated CNCs over those produced through conventional acid hydrolysis. The study employs advanced characterization techniques, including Fourier Transform Infrared (FTIR) spectroscopy, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Thermogravimetric Analysis (TGA), to analyze untreated maize stalk extracted cellulose, green extracted CNCs, and acetylated CNCs. FTIR spectroscopy identifies changes in functional groups, underscoring the efficacy of the extraction and modification processes. XRD analysis demonstrates a beneficial transformation from cellulose I to cellulose II allomorphs post-acetylation, with increased crystallinity index values indicating effective removal of amorphous regions. SEM imaging reveals the preservation of rod-like structures in CNCs, while acetylated CNCs exhibit advantageous morphological changes, such as reduced nanocrystal length and increased branching. TGA results show superior thermal stability in green extracted CNCs and favorable thermal degradation behavior in acetylated CNCs. Overall, this study underscores the potential of acetylation to develop sustainable nanomaterials with tailored properties, offering significant advancements for various applications. Emphasizing the advantages of the prepared ACCNCs and the green synthesis method over traditional acid hydrolysis extraction, this research paves the way for innovative applications in diverse fields.

10 November 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson Masulubanye Mohomane
Samson Masulubanye Mohomane
VEVetrimurugan Elumalai
Vetrimurugan Elumalai
TMTshwafo Motaung
Tshwafo Motaung
The removal of cationic dyes from industrial wastewater presents a significant environmental challenge. This research examines the effectiveness of functionalized cellulose-based silica aerogels as sustainable adsorbents for methylene blue (MB) dye. This research provides a systematic comparative study on the effectiveness of four distinct functionalization strategies, carboxylate (CCNC), double carboxylate (DCCNC), carboxymethyl (CMC), and thiol-modification, applied to cellulose-based silica aerogels as sustainable adsorbents for methylene blue (MB) dye. Cellulose nanocrystals (CNCs) were extracted from sugarcane bagasse waste and subsequently functionalized into carboxylate (CCNC), double carboxylate (DCCNC), carboxymethyl (CMC), and thiol-modified variants. The materials were later integrated into a silica matrix, resulting in the formation of porous aerogel nanocomposites. The materials underwent thorough characterization through FTIR, XRD, SEM, TGA, and BET analyses, validating successful functionalization and the development of mesoporous structures. Batch adsorption tests demonstrated that the CMC-silica aerogel exhibited superior performance, attaining a maximum adsorption capacity of 197 mg/g and complete removal efficiency under ideal circumstances (pH 10, 25 °C, 60 min). The adsorption process is accurately characterized by the Langmuir isotherm and pseudo-second-order kinetic models, signifying monolayer adsorption and chemisorption as the rate-limiting step. The thermodynamic parameters indicate that the adsorption process is exothermic and spontaneous. The CMC-silica aerogel exhibited significant reusability, maintaining over 90% efficiency after six consecutive cycles. The findings illustrate the efficacy of functionalized cellulose–silica aerogels, especially the CMC form, as effective, environmentally sustainable, and reusable adsorbents for the treatment of dye-polluted water.

25 April 2025 in Crystals
Verified
Journal Article
Open access
PDF file
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson M. Mohomane
Samson M. Mohomane
TMThembinkosi Malevu
Thembinkosi Malevu
SMSetumo Motloung
Setumo Motloung
LKLehlohonolo Fortune Koao
Lehlohonolo Fortune Koao
TMTshwafo Motaung
Tshwafo Motaung
This study investigates the impact of sulphuric acid concentration (40% vs. 60%) on the extraction of cellulose nanocrystals (CNCs) from alkali-treated sugarcane bagasse (SCB) and their reinforcement in poly(furfuryl) alcohol (PFA) composites. Probing into the physicochemical changes through scanning electron microscopy (SEM) displayed drastic morphological changes, alkali removal of noncellulosic components followed by sulphuric acid hydrolysis further refined cellulose to nanoscale morphologies. The X-ray diffraction (XRD) study showed that after alkali treatment, the crystallinity was significantly higher (65%), and the crystallinity index of CNCs prepared from 40% H2SO4 was greater than the CNCs prepared from 60% H2SO4 (61%). Fourier transform infrared spectral and thermogravimetric analysis (TGA) suggested that improving the polymeric performance by the incorporation of a CNC resulted in a decrease in the thermal stability of the modified polyelectrolyte, which was largely attributed to higher sulphate esterification achieved at higher acid concentrations. It is possible to use CNCs to achieve higher mechanical performance while also indicating that optimizing thermal properties and mechanical performance of high-performance materials will require an improved understanding of the microstructural parameters governing the polymer–filler interface. This work demonstrates that acid concentration critically balances CNC crystallinity and thermal performance, offering insights for optimizing sustainable nanocomposites.

14 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson Masulubanye Mohomane
Samson Masulubanye Mohomane
VEVetrimurugan Elumalai
Vetrimurugan Elumalai
TMTshwafo Motaung
Tshwafo Motaung
The insistent presence of detrimental chemical dyes, such as methylene blue (MB), in aquatic ecosystems creates a significant environmental fear that requires the development of innovative and effective remediation methods. This study examines the production and application of a novel carboxylate cellulose nanocrystal-silica-titanium dioxide (CCNC-silica-TiO2) hybrid composite aerogel designed to enhance the photocatalytic degradation of methylene blue (MB). Carboxylic groups were incorporated into cellulose nanocrystals (CNCs) derived from sugarcane bagasse (SCB) waste to improve their dye adsorption capacity. The CCNCs were later incorporated into a silica aerogel matrix using a sol–gel method, followed by the introduction of TiO2 nanoparticles. Characterization techniques, including FTIR and XRD, confirmed the successful chemical functionalization and composite synthesis. SEM analysis revealed a highly porous three-dimensional architecture, whilst BET surface area assessment showed that the CCNC-SiO2-TiO2 aerogel possessed a significant specific surface area of 448.69 m2/g. Under ultraviolet light, the hybrid aerogel demonstrated remarkable photocatalytic performance, achieving a 93% degradation rate of methylene blue, far above the 22% recorded in a CCNC-silica control. The degradation kinetics followed a pseudo-first-order model. The composite demonstrated significant reusability, maintaining over 70% efficiency after five consecutive cycles. The findings indicate that the adsorptive capacity of carboxylate CNCs, together with the photocatalytic efficiency of TiO2, improves the efficacy, stability, and longevity of the CCNC-SiO2-TiO2 aerogel in wastewater treatment.

17 October 2025 in Gels
Verified
Journal Article
Open access
PDF file
Nduduzo Lungisani KhumaloNduduzo Lungisani Khumalo
Nduduzo Lungisani Khumalo
SMSamson Mohomane
Samson Mohomane
VEVetrimurugan Elumalai
Vetrimurugan Elumalai
TMTshwafo Motaung
Tshwafo Motaung
Heavy metal contamination in water, predominantly from copper (Cu(II)) ions, poses substantial risks to human and environmental health. This study developed a novel, robust adsorbent known as a carboxylate cellulose nanocrystal–silica–graphene oxide hybrid composite porous monolith, which effectively removes Cu(II) from water in a rapid manner. Carboxylate cellulose nanocrystals with enhanced metal-binding properties were synthesized from cellulose extracted from sugarcane bagasse, a significant agricultural byproduct. The porous monolith was synthesized through the combination of carboxylate cellulose nanocrystals, tetraethyl orthosilicate (TEOS), and graphene oxide, utilizing a sol–gel method. The efficacy of the synthesis was confirmed using Fourier-Transform Infra-red (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and Brunauer–Emmett–Teller (BET) analyses. The material exhibited a highly porous mesoporous structure with a surface area of 512 m2/g, signifying a significant enhancement. Batch adsorption experiments under optimal conditions (pH = 5.5, contact time = 240 min, initial concentration = 200 mg/L) demonstrated a high experimental adsorption capacity of 172 mg/g for Cu(II). The adsorption process was best described by the Langmuir isotherm model, which yielded a theoretical maximum capacity (qm) of 172 mg/g, and the pseudo-second-order kinetic model, confirming monolayer coverage and chemisorption as the rate-limiting step. Thermodynamic analyses demonstrate that the process is both spontaneous and exothermic. The porous monolith demonstrates the capability for multiple uses, maintaining over 70% efficiency after five cycles. The findings indicate that the carboxylate cellulose nanocrystal–silica–graphene oxide hybrid composite porous monolith is an efficient and robust method for the remediation of copper-contaminated water.