The results of the high-field technique for obtaining and testing the carbyne strength in situ are presented. By using molecular dynamics simulation and ab initio calculations, a comprehensive analysis of the results is executed. High-field technique for experimental measurement of the carbyne strength in situ is briefly described. It is shown that the technique used gives a lower estimation for strength of carbyne, which equals 251 GPa at T = 77 K. This value is close to the strength 7.85 nN (250 GPa) of contact atomic bond between carbyne and graphene sheet, from which the monatomic chain is pulled. The strength of carbyne itself is determined by strength of an edge atomic bond and it is ≈ 12.35 nN (393 GPa) at T = 0 K. For carbynes containing more than 10 to 12 atoms, the coefficient of elasticity (k Y = 145.40 nN) and the elastic modulus (Y = 4631 GPa) are ascertain.
Grain boundary engineering represents a prospective tool for producing high performance structural and functional materials, including super-strong nanocrystalline materials. There remains a fundamental challenge to experimentally evaluate the inherent strength of grain boundaries providing a higher limit for the strength of polycrystals. Here we report that using a combination of atomic-scale and crystallographic characterizations and in situ hydrostatic tests in a field-ion microscope, the inherent strength of grain boundaries can be directly measured. It was found that mechanically annealed dislocation-free tungsten bicrystals having nanometer-sized dimensions are capable of withstanding extreme stresses close to the values of the theoretical strength of monocrystals. This finding provides a guideline for understanding the fundamental mechanical response of nanocrystals relevant to applications.
The energy of formation of self-interstitial atoms has been experimentally determined using an energy analysis of low-temperature field evaporation of tungsten in a field-ion microscope. An experimental approach, based on the strong dependence of the threshold field for evaporation on the total energy of the surface atoms, is used. It was found that the excited atomic states can be produced by the release of the formation energy of self-interstitial atoms emerging at the surface. The experimental results are discussed in the framework of the image-hump model of field evaporation and compared with theoretical data on the energy of formation of interstitial atoms.
The intrinsic strength of freestanding carbon atomic chains was measured by in situ high-field mechanical testing of carbon atomic chains carried out inside a field-ion microscope. The determined breaking field strength corresponds to a tensile strength of carbon atomic chains at 5 K equal to 245 GPa. Carbon atomic chains also show exceptionally high-evaporation stability in electric fields up to 259 V/nm. The tensile strength of linear carbon chains significantly exceeds the tensile strength of known two-dimensional and three-dimensional carbon materials, including carbon nanotubes and graphene. Our results can be considered as direct experimental evidence for Pauling's prediction of bond stiffening with reduced atomic bond order.
1 August 2009 in Science and Technology of Advanced Materials
The strength of Mo nanorods was measured under uniaxial tension. Tensile tests of 〈 110〉-oriented single-crystalline molybdenum rod-shaped specimens with diameters from 25 to 90 nm at the apex were conducted inside a field-ion microscope (FIM). The nanocrystals were free from dislocations, planar defects and microcracks, and exhibited the plastic mode of failure under uniaxial tension with the formation of a chisel-edge tip by multiple gliding in the [Formula: see text] and [Formula: see text] deformation systems. The experimental values of tensile strength vary between 6.3 and 19.8 GPa and show a decrease with increasing nanorod diameter. A molecular dynamic simulation of Mo nanorod tension also suggests that the strength decreases from 28.8 to 21.0 GPa when the rod diameter increases from 3.1 to 15.7 nm. The maximum values of experimental strength are thought to correspond to the inherent strength of Mo nanocrystals under uniaxial tension (19.8 GPa, or 7.5% of Young's modulus).