The use of satellite-based Remote Sensing (RS) is a well-developed field of research. RS techniques have been successfully utilized to evaluate the chlorophyll content for the monitoring of sugarcane crops. This research provides a new framework for inferring the chlorophyll content in sugarcane crops at the canopy level using unmanned aerial vehicles (UAVs) and spectral vegetation indices processed with multiple machine learning algorithms. Studies were conducted in a sugarcane field located in Sugarcane Research Institute (SRI, Uda Walawe, Sri Lanka), with various fertilizer applications over the entire growing season from 2020 to 2021. An UAV with multispectral camera was used to collect the aerial images to generate the vegetation indices. Ground measurements of leaf chlorophyll were used as indications for fertilizer status in the sugarcane field. Different machine learning (ML) algorithms were used ground-truthing data of chlorophyll content and spectral vegetation indices to forecast sugarcane chlorophyll content. Several machine learning algorithms such as MLR, RF, DT, SVR, XGB, KNN and ANN were applied in two ways: before feature selection (BFS) by training the algorithms with all twenty-four (24) vegetation indices with five (05) spectral bands and after feature selection (AFS) by training algorithms with fifteen (15) vegetation indices. All the algorithms with both BFS and AFS methods were compared with an estimated coefficient of determination (R²) and root mean square error (RMSE). Spectral indices such as RVI and DVI were shown to be the most reliable indices for estimating chlorophyll content in sugarcane fields, with coefficients of determination (R²) of 0.94 and 0.93, respectively. XGB model shows the highest validation score (R²) and lowest RMSE in both methods of BFS (0.96 and 0.14) and AFS (0.98 and 0.78), respectively. However, KNN and SVR algorithms show the lowest validation accuracy than other models. According to the results, the AFS validation score is higher than BFS in MLR, SVR, XGB and KNN. Even though, validation score of the ANN model is decreased in AFS. The findings demonstrated that the use of multispectral UAV could be utilized to estimate chlorophyll content and measure crop health status over a larger sugarcane field. This methodology will aid in real-time crop nutrition management in sugarcane plantations by reducing the need for conventional measurement of sugarcane chlorophyll content.

Sugarcane white leaf phytoplasma (white leaf disease) in sugarcane crops is caused by a phytoplasma transmitted by leafhopper vectors. White leaf disease (WLD) occurs predominantly in some Asian countries and is a devastating global threat to sugarcane industries, especially Sri Lanka. Therefore, a feasible and an effective approach to precisely monitoring WLD infection is important, especially at the early pre-visual stage. This work presents the first approach on the preliminary detection of sugarcane WLD by using high-resolution multispectral sensors mounted on small unmanned aerial vehicles (UAVs) and supervised machine learning classifiers. The detection pipeline discussed in this paper was validated in a sugarcane field located in Gal-Oya Plantation, Hingurana, Sri Lanka. The pixelwise segmented samples were classified as ground, shadow, healthy plant, early symptom, and severe symptom. Four ML algorithms, namely XGBoost (XGB), random forest (RF), decision tree (DT), and K-nearest neighbors (KNN), were implemented along with different python libraries, vegetation indices (VIs), and five spectral bands to detect the WLD in the sugarcane field. The accuracy rate of 94% was attained in the XGB, RF, and KNN to detect WLD in the field. The top three vegetation indices (VIs) for separating healthy and infected sugarcane crops are modified soil-adjusted vegetation index (MSAVI), normalized difference vegetation index (NDVI), and excess green (ExG) in XGB, RF, and DT, while the best spectral band is red in XGB and RF and green in DT. The results revealed that this technology provides a dependable, more direct, cost-effective, and quick method for detecting WLD.

White leaf disease (WLD) is an economically significant disease in the sugarcane industry. This work applied remote sensing techniques based on unmanned aerial vehicles (UAVs) and deep learning (DL) to detect WLD in sugarcane fields at the Gal-Oya Plantation, Sri Lanka. The established methodology to detect WLD consists of UAV red, green, and blue (RGB) image acquisition, the pre-processing of the dataset, labelling, DL model tuning, and prediction. This study evaluated the performance of the existing DL models such as YOLOv5, YOLOR, DETR, and Faster R-CNN to recognize WLD in sugarcane crops. The experimental results indicate that the YOLOv5 network outperformed the other selected models, achieving a precision, recall, mean average precision@0.50 (mAP@0.50), and mean average precision@0.95 (mAP@0.95) metrics of 95%, 92%, 93%, and 79%, respectively. In contrast, DETR exhibited the weakest detection performance, achieving metrics values of 77%, 69%, 77%, and 41% for precision, recall, mAP@0.50, and mAP@0.95, respectively. YOLOv5 is selected as the recommended architecture to detect WLD using the UAV data not only because of its performance, but this was also determined because of its size (14 MB), which was the smallest one among the selected models. The proposed methodology provides technical guidelines to researchers and farmers for conduct the accurate detection and treatment of WLD in the sugarcane fields.

Phytophthora root rot (PRR) infects the roots of avocado trees, resulting in reduced uptake of water and nutrients, canopy decline, defoliation, and, eventually, tree mortality. Typically, the severity of PRR disease (proportion of canopy decline) is assessed by visually comparing the canopy health of infected trees to a standardised set of photographs and a corresponding disease rating. Although this visual method provides some indication of the spatial variability of PRR disease across orchards, the accuracy and repeatability of the ranking is influenced by the experience of the assessor, the visibility of tree canopies, and the timing of the assessment. This study evaluates two image analysis methods that may serve as surrogates to the visual assessment of canopy decline in large avocado orchards. A smartphone camera was used to collect red, green, and blue (RGB) colour images of individual trees with varying degrees of canopy decline, with the digital photographs then analysed to derive a canopy porosity percentage using a combination of ‘Canny edge detection’ and ‘Otsu’s’ methods. Coinciding with the on-ground measure of canopy porosity, the canopy reflectance characteristics of the sampled trees measured by high resolution Worldview-3 (WV-3) satellite imagery was also correlated against the observed disease severity rankings. Canopy porosity values (ranging from 20–70%) derived from RGB images were found to be significantly different for most disease rankings (p < 0.05) and correlated well (R² = 0.89) with the differentiation of three disease severity levels identified to be optimal. From the WV-3 imagery, a multivariate stepwise regression of 18 structural and pigment-based vegetation indices found the simplified ratio vegetation index (SRVI) to be strongly correlated (R² = 0.96) with the disease rankings of PRR disease severity, with the differentiation of four levels of severity found to be optimal.

Obtaining average canopy temperature (T_c) by thresholding canopy pixels from on-ground thermal imagery has historically been undertaken using ‘wet’ and ‘dry’ reference surfaces in the field (reference temperature thresholding). However, this method is extremely time inefficient and can suffer inaccuracies if the surfaces are non-standardised or unable to stabilise with the environment. The research presented in this paper evaluates non-reference techniques to obtain average canopy temperature (T_c) from thermal imagery of avocado trees, both for the shaded side and sunlit side, without the need of reference temperature values. A sample of 510 thermal images (from 130 avocado trees) were acquired with a FLIR B250 handheld thermal imaging camera. Two methods based on temperature histograms were evaluated for removing non-canopy-related pixel information from the analysis, enabling T_c to be determined. These approaches included: 1) Histogram gradient thresholding based on temperature intensity changes (HG); and 2) histogram thresholding at one or more standard deviation (SD) above and below the mean. The HG method was found to be more accurate (R² > 0.95) than the SD method in defining canopy pixels and calculating T_c from each thermal image (shaded and sunlit) when compared to the standard reference temperature thresholding method. The results from this study present an alternative non-reference method for determining T_c from ground-based thermal imagery without the need of calibration surfaces. As such, it offers a more efficient and computationally autonomous method that will ultimately support the greater adoption of non-invasive thermal technologies within a precision agricultural system.