Zhenqian LU

Dr. Zhenqian LU


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
QZQingqing Zhou
Qingqing Zhou
JCJiayi Chen
Jiayi Chen
ZLZhenqian LU
Zhenqian LU
QTQiang Tian
Qiang Tian
JSjianzhong Shao
jianzhong Shao
Fabrics were flame-retardant finished using phytic acid, a cost-effective, ecologically acceptable, and easily available flame-retardant finishing chemical. Then, on the surface of the completed fabric, silver nanoparticles (Ag NPs) were grown in situ to minimize Ag NPs aggregation and heterogeneous post-finishing and to increase washing durability. Thus, flame-retardant and antibacterial qualities were added to textiles. The as-prepared textiles were evaluated for their combustion performance, thermal performance, and antibacterial capabilities. At the same time, their microstructures were studied using X-ray diffractometry (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The findings indicated that flame-retardant textiles had an excellent launderability (limiting oxygen index = 31% after 20 washing cycles). Meanwhile, Ag NPs-loaded flame-retardant textiles demonstrated self-extinguishing properties, with a limiting oxygen index (LOI) of 27%. Bacteriostatic widths of flame-retardant antibacterial textiles against Escherichia coli and Staphylococcus aureus were 5.28 and 4.32 mm, respectively, indicating that Ag NPs-loaded flame-retardant fabrics have certain flame-retardant and antibacterial capabilities. SEM and TEM analysis indicated that nanoparticles were uniformly dispersed over Ag NPs-loaded flame-retardant textiles and were around 20 nm in size. When compared to flame-retardant textiles, Ag NPs-loaded flame-retardant fabrics showed varied binding energy of P and N on the surface and Ag ion emergence. Thermogravimetric analysis at various heating rates revealed that the main pyrolysis temperature range of flame-retardant fabrics decreased, while the main pyrolysis temperature range of Ag NPs-loaded flame-retardant fabrics increased; the heating rate influenced the pyrolysis range but not the fabric mass loss. In situ reduction synthesis of Ag NPs-loaded flame-retardant textiles may successfully reduce agglomeration and heterogeneous dispersion of nano-materials during post-finishing.

13 September 2023 in Composite Structures
Verified
Journal Article
Closed access
XYXiaori Yang
Xiaori Yang
LZLiangang Zheng
Liangang Zheng
HMHuan Ma
Huan Ma
ZLZhenqian LU
Zhenqian LU
FXFujun Xu
Fujun Xu

22 March 2022 in Journal of Industrial Textiles
Verified
Journal Article
Closed access
FZFeng Zhao
Feng Zhao
HCHeng Chen
Heng Chen
HGHan Gu
Han Gu
QJQian Jiang
Qian Jiang
ZLZhenqian LU
Zhenqian LU
LWLiwei Wu
Liwei Wu
Shear stiffening gel (SSG) with significant shear stiffening effect overcomes the problems of fluid volatilization and particle deposition, and exhibits a wide range of application prospects in intelligent protection. In this work, SSG with different rheological properties were manufactured by mechanical blending and crosslinking and coated on Kevlar fabric. The dynamic rheological properties of SSG and the low-velocity impact resistance of Kevlar/SSG composites were investigated, and the coupling mechanism between SSG and Kevlar fabric was analyzed. The results reveal that the storage modulus of SSG increases by 3–6 orders of magnitude when shear frequency ranges from 0.1 to 100 Hz, and the highest storage modulus reached 2.53 MPa. The impact deformation of the composite is reduced after SSG stiffening, and the infiltration of SSG inside the fabric also prevents fibers pull-out during the impact process. By synergizing the performance of SSG and Kevlar fabric, the optimal single-layer T280 composite can absorb up to 70.21% of the impact energy, reaching the energy absorption efficiency of 0.5 J/g. The process optimization and rheological design provide a theoretical foundation to further enhance the impact resistance performance.

20 June 2024 in Composite Structures
Verified
Journal Article
Closed access
ZLZhenqian LU
Zhenqian LU
XSXu Shen
Xu Shen
ZLZhihui Li
Zhihui Li
QJQi Jia
Qi Jia

8 March 2022 in Materials
Verified
Journal Article
Open access
PDF file
QWQianwen Wang
Qianwen Wang
FZFa Zhang
Fa Zhang
ZLZhenqian LU
Zhenqian LU
DCDongfeng Cao
Dongfeng Cao
XJXiwen Jia
Xiwen Jia
This paper reported the tensile failure strengths and damage procedure of composite laminate manufactured from the toughened-epoxy T800 prepreg at multi-scale levels. According to the exterior and interior distinction of each layer in laminate, the macro/mesoscale representative volume element (macro-RVE, meso-RVE) was first constructed, respectively. Then the micro-scale representative volume element (micro-RVE) with a hexagonal fiber-packed pattern in the interior zone of each layer in the laminate was finally determined on the principle of the same fiber volume fraction between the composite laminate and multi-scale RVEs. In the multi-RVEs analysis, the mechanical failure strengths of each scale model were transmitted from the last-scale model’s homogenization, such as the meso-RVE from micro-RVE and the macro-RVE from meso-RVE. Based on our previous report, the innovative multi-scale damage and post-damage models on the concept of the smear crack were improved fully and incorporated by user-defined material subroutines (UMATs), such as in the addition of multiple cracks co-coupled, which makes it predict the element damage procedure. The averaged mechanical responses with damage mechanism of multi-scale RVEs under tensile, compressive, or shear loadings were obtained wholly by the homogenization method. The macroscale tensile damage initiation and propagation procedure were analyzed in detail including their global/local responses, being extended to comparison with experimental results.

2 February 2022 in Journal of Industrial Textiles
Verified
Journal Article
Closed access
ZLZhenqian LU
Zhenqian LU
JLJingchun Lv
Jingchun Lv
JQJiawen Qiu
Jiawen Qiu
LZLinsheng Zhang
Linsheng Zhang
In order to introduce multifunctional properties into the recycled polyphenylene sulfite (PPS) nonwoven fabrics, highly conductive and hydrophobic fabrics with excellent Joule heating performance were fabricated by depositing in-situ polymerized polypyrrole (PPy) onto PPS nonwoven fabric and followed by a silicone coating process. The resultant PPy-coated nonwoven fabric exhibited high electrical conductivity. The surface resistivity of PPy-coated nonwoven fabric was less than 8.8 Ω/sq. The high conductivity of PPy coating provided the fabric with excellent electrical heating properties in conjunction with a photothermal heating properties. The saturation temperature of the samples can get to 125.6°C with 4V DC power. The thin silicone coating can help to resist the oxidation of PPy and endow the nonwoven fabrics with excellent water-resistant features. This study provided a simple and effective method to transform the recycled PPS nonwoven fabric into a multifunction material.