In this paper, we illustrate a new, simple and complementary ground-based methodology to retrieve the vertically resolved atmospheric precipitation intensity through a synergy between measurements from the National Aeronautics and Space Administration (NASA) Micropulse Lidar network (MPLNET), an analytical model solution and ground-based disdrometer measurements. The presented results are obtained at two mid-latitude MPLNET permanent observational sites, located respectively at NASA Goddard Space Flight Center, USA, and at the Universitat Politècnica de Catalunya, Barcelona, Spain. The methodology is suitable to be applied to existing and/or future lidar/ceilometer networks with the main objective of either providing near real-time (3 h latency) rainfall intensity measurements and/or to validate satellite missions, especially for critical light precipitation (<3 mm h).
10 August 2016 in Journal of Geophysical Research: Atmospheres
A field campaign took place in the western and central Mediterranean basin on June–July 2013 in the framework of the ChArMEx (Chemistry-Aerosol Mediterranean Experiment, http://charmex.lsce.ipsl.fr/)/ADRIMED (Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region, http://adrimed.sedoo.fr/) project to characterize the aerosol direct radiative forcing (DRF) over the Mediterranean. This work focuses on the aerosol DRF estimations at Lecce (40.33°N; 18.11°E; 30 m above sea level) during the Saharan dust outbreak that affected southern Italy from 20 to 24 June 2013. The Global Atmospheric Model (GAME) and the Two-Stream (TS) model were used to calculate the instantaneous aerosol DRF in the short-wave (SW) and long-wave (LW) spectral ranges, at the surface and at the top of the atmosphere (TOA). The main differences between the two models were due to the different numerical methods to solve the radiative transfer (RT) equations and to the more detailed spectral resolution of GAME compared to that of TS. 167 and 115 subbands were used by GAME in the 0.3–4 and 4–37 µm spectral ranges, respectively. Conversely, the TS model used 8 and 11 subbands in the same spectral ranges, respectively. We found on 22 June that the SW-DRFs from the two models were in good agreement, both at the TOA and at the surface. The instantaneous SW-DRFs at the surface and at the TOA varied from −50 to −34 W m−2 and from −6 to +8 W m−2, respectively, while the surface and TOA LW-DRFs ranged between +3.5 and +8.0 W m−2 and between +1.7 and +6.9 W m−2, respectively. In particular, both models provided positive TOA SW-DRFs at solar zenith angles smaller than 25° because of the mixing of the desert dust with anthropogenic pollution during its transport to the study site. In contrast, the TS model overestimated the GAME LW-DRF up to about 5 and 7.5 times at the surface and at the TOA, respectively, when the dust particle contribution was largest. The low spectral resolution of the real (n) and imaginary (k) refractive index values was mainly responsible for the LW-DRF overestimates of the TS model. However, we found that the “optimization” of the n and k values at 8.75 and 11.5 µm was sufficient in this study to obtain a satisfactory agreement between the LW-DRFs from the two models, both at the TOA and at the surface. The impact of the spectral dependence of the water vapor absorption coefficients on the estimation of the flux without aerosol has also been addressed. Paper results did not reveal any significant impact due to the different numerical methods used by the two models to solve the RT equations.
11 January 2017 in Air Quality, Atmosphere & Health
In this study, the feasibility of using ceilometer signals to retrieve radiative forcing values is evaluated. The Global Atmospheric Model (GAME) radiative transfer model is used to estimate the shortwave and longwave radiative forcing using an aerosol parameterization based on AERONET data and vertical profiles from a Lufft CHM-15k Nimbus ceilometer. First, eight cases confirmed as dusty days are analyzed to check the feasibility of using ceilometer profiles to feed GAME. The obtained radiative forcing estimates are in good agreement with the literature showing negative values in the short wave (SW) (cooling effect) and positive values in the long wave (LW) (heating effect), both at all levels. As in the literature, radiative forcing estimates show a strong dependence on variations in the aerosol optical depth (AOD), solar zenith angle (), surface temperature (ST), and single scattering albedo at 440 nm (SSA440). Thus, GAME can be fed using ceilometer measurements obtaining reliable results. Then, as the temporal evolution of the AOD440 between 27 January and 15 June compared to the 6-year weekly AERONET AOD440 average (from 2014 to 2019) shows a decrease because of the lockdown imposed in Spain due to the COVID-19, a total of 37 radiative forcing calculations without African dust, divided into 8 scenarios, are performed in order to check the effect of the lockdown measures in the radiative forcing. It is shown that the decrease in the AOD, during the lockdown, caused a decrease in the cooling effect in the SW spectral range at all levels. Besides, the increase in the ST increased the heating effect of the aerosols in the LW at the top of the atmosphere and the presence of pollution and absorbing particles (SSA440 < 0.90) caused an increase of the heating effect in the LW at the surface. Therefore, the observed variations in the radiative forcing estimates before and during the lockdown are directly related with the decrease in emissions of aerosols related to human activities.
A new architecture for the measurement of depolarization produced by atmospheric aerosols with a Raman lidar is presented. The system uses two different telescopes: one for depolarization measurements and another for total-power measurements. The system architecture and principle of operation are described. The first experimental results are also presented, corresponding to a collection of atmospheric conditions over the city of Barcelona.
6 May 2020 in IEEE Transactions on Geoscience and Remote Sensing
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations.