Suhair Atta

Prof. Suhair Atta


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 March 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SASuhair Atta
Suhair Atta
In this study, Seeds powder of Foeniculum vulgare was used to prepare a novel adsorbent, the modification of the prepared adsorbent was done by each of ZnCl2, oxalic acid, and CuS, all samples have been characterized by different techniques and examined for Potassium permanganate (KMnO4) adsorption. Among the four modified and unmodified adsorbents, the sample modified by oxalic acid has the highest percentage removal for KMnO4 adsorption (%R = 89.36). The impact of KMnO4 concentration, adsorbent dose, contact temperature, contact time, and solution pH on the adsorption performance was also investigated. The experimental data of this adsorption was analyzed by different kinetic and isotherm models. As Constants of thermodynamic ΔG°, ΔH°, and ΔS° have been also evaluated. Surface area, pore volume, and pore size of the modified oxalic acid F. vulgare seeds powder adsorbent were determined as 0.6806 m2 g−1, 0.00215 cm3 g−1, and 522.063 Å, as pHZPC also was stated to be 7.2. The R2 values obtained from applying different isotherm and kinetic models (0.999 and 0.996) showed that the adsorption performance of KMnO4 follows the Langmuir and Pseudo 2nd order models. Furthermore, high adsorption capacities of 1111.11, 1250.00, and 1428.57 mg g−1 were achieved at three temperatures that were used in this study. Constants of thermodynamic ΔG°, ΔH°, and ΔS° values indicate chemical and spontaneous adsorption at the adsorbent surface. Therefore, the modified adsorbent can be used to remove KMnO4 dye from pollutant water samples.

5 December 2024 in Processes
Verified
Journal Article
Open access
PDF file
SASuhair Atta
Suhair Atta
ADAhmed Ali Darwish
Ahmed Ali Darwish
LSLeena Shwashreh
Leena Shwashreh
Fatimah AlotaibiFatimah Alotaibi
Fatimah Alotaibi
JAJozaa N. Al-Tweher
Jozaa N. Al-Tweher
EEEman F El-Zaidia
Eman F El-Zaidia
With the increasing demand for eco-friendly water treatment solutions, the development of novel photocatalysts such as calcium polyanion (Ca-POM) plays a vital role in mitigating industrial wastewater pollution. In this research, calcium polyanion, H60N6Na2Ca2W12O60 (Ca–POM), was successfully synthesized via a self-assembly reaction from metal-oxide subunits. The synthesized Ca–POM was verified to have a polycrystalline structure with a broad size distribution, with an average particle diameter of approximately 623.62 nm. Powder X-ray diffraction (XRD) analysis confirmed the polycrystalline structure of the Ca–POM, with a calculated band gap energy of 3.29 eV. The photocatalytic behavior of the Ca-POM sample was tested with two model dyes, methylene blue (MB) and methyl orange (MO). The reaction mixture was then exposed to ultraviolet (UV) irradiation for durations ranging from 20 to 140 min. The synthesized cluster demonstrated photocatalytic efficiency (PCE%) values of 81.21% for MB and 25.80% for MO. This work offers a valuable basis for applying Ca–POM as a heterogeneous photocatalyst for treating industrial wastewater organic pollutants and highlights the potential of Ca–POM in sustainable water treatment applications.

19 July 2021 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
NANasser A. Alamrani
Nasser A. Alamrani
HAHatem Ahmed Al-Aoh
Hatem Ahmed Al-Aoh
MAMeshari M Aljohani
Meshari M Aljohani
SASuhair Atta
Suhair Atta
MSM. Sobhi
M. Sobhi
MAMona A. A. Abdelfattah
Mona A. A. Abdelfattah
The powder of Ocimum Basilicum leaves was treated by zinc chloride (ZnCl2) and applied as a new and low-cost sorbent for extraction of permanganate anions (MnO4−) from liquid phase. The functional groups of the ring stretching vibration, NH2 deformation, stretching of C-O, stretching of CH, and stretching of NH were found in the sorbent of zinc chloride Ocimum basilicum leaves powder (ZCOBLP) at 1516.21, 1629.33, 1047.00, 2929.88, and 3294.93cm−1, respectively. This adsorbent has 8.3 pHZPC, 117.27m2g−1 surface area, 0.00711ccg−1 pore volume and average pore diameter of 264.144Å. The outcomes of sorption experiments designate the positive impact for temperature, time of agitation, and started concentration of MnO4− and negative impact for pH. The optimal conditions were 1300mg·L−1 as started adsorbate concentration, 55°C as solution temperature, agitation time of 420min, and pH of 1.5. The outcomes of the equilibrium and dynamic approve that this sorption is spontaneous and heat-absorbing process, and the obtained data were described well by isotherm model of Langmuir and 2nd-order dynamic model. The capacities of this sorption were 588.235, 625.000, 666.667, and 714.286mg·g−1 at 25, 35, 45, and 55 (°C), respectively. The superior sorption capacities of the uncostly ZCOBLP will make it successfully used for MnO4− ions extraction from liquid phases.

1 September 2020 in Materials Research Express
Verified
Journal Article
Open access
SASuhair Atta
Suhair Atta
Sage Leaves Powder was modified by 30% w/w of Zink Chloride (ZnCl2) and used as a cheap adsorbent for potassium permanganate (KMnO4) adsorption from aqueous media. The characterization of the synthesized adsorbent showed diversity in its functional groups at 1030, 1700, and 2930 cm−1. The impact of experimental conditions on the adsorption was investigated. It was found that these experimental conditions except pH have positive effects on the efficiency of this adsorbent. The initial KMnO4 concentration of 1500 mg l−1, the temperature of 60 °C and the solution pH of 1.5 were found to be the ideal conditions in this adsorption. The equilibrium data were analyzed using three isotherm models. Langmuir model was found to be the best model applied in this work. The adsorption capacities were 714.29, 769.23, 833.33 and 909.09 (mg g−1) at 30, 40, 50 and 60 (°C), respectively. The parameters of the adsorption kinetics were evaluated by three kinetic models. The kinetic results confirm that the 2nd order described well the experimental data. Thermodynamic outcomes suggest that this adsorption is a spontaneous and endothermic process. The obtained results make from this adsorbent a good option for KMnO4 removal from wastewater in terms of its low-cost and adsorption performance.

25 September 2025 in Catalysts
Verified
Journal Article
Open access
PDF file
SASuhair Atta
Suhair Atta
ADAhmed Ali Darwish
Ahmed Ali Darwish
NANada M. Alatawi
Nada M. Alatawi
NANada D. Alkhathami
Nada D. Alkhathami
JAJozaa N. Al-Tweher
Jozaa N. Al-Tweher
EEEman F El-Zaidia
Eman F El-Zaidia
This research focuses on the synthesis, characterization, and photocatalytic performance of Cu-based polyoxometalate (Cu-POM) as an effective catalyst for the degradation of organic dyes, specifically Congo Red (CR) and Phenol Red (PR). The main goals are to synthesize Cu-POM using a controlled self-assembly technique, characterize its optical and structural characteristics using FTIR, XRD, SEM, TGA, and UV-Vis spectroscopy, and estimate its photocatalytic activity when exposed to UV light. The outcomes confirm the successful formation of Cu-POM with well-defined nanostructures and a crystalline polyoxometalate framework. The determined optical bandgap of 3.65 eV indicates its strong UV-light responsiveness. The photocatalytic degradation experiments demonstrated high removal efficiencies of 58.1% for CR and 64.6% for PR under UV irradiation, corresponding kinetic rate constants of 0.00484 min−1 and 0.00579 min−1, respectively. The superior photocatalytic activity is attributed to the efficient charge carrier separation and high surface area of Cu-POM. These findings highlight the potential of Cu-POM as a promising heterogeneous photocatalyst for sustainable wastewater treatment and environmental remediation.

16 March 2026 in Scientific Reports
Verified
Journal Article
Open access
SASuhair Atta
Suhair Atta
NANada M. Alatawi
Nada M. Alatawi
EEE. F. M. El-Zaidia
E. F. M. El-Zaidia
FAFatimah A. Alotaibi
Fatimah A. Alotaibi
JAJozaa N. Al-Tweher
Jozaa N. Al-Tweher
ADAhmed Ali Darwish
Ahmed Ali Darwish
Polyoxometalates (POMs) have attracted increasing attention as photoactive inorganic materials for dye-related photochemical processes. In this work, a Zn-modified BiW11 polyoxometalate (Zn-BiW11) was synthesized and investigated for the UV-induced photodegradation of two structurally distinct azo dyes, Congo Red (CR) and Phenol Red (PR). Structural and optical characterizations using FTIR, XRD, SEM, and UV-Vis spectroscopy confirm that Zn modification alters the microstructural features and optical response of the parent BiW11 system. UV-Vis absorption analysis reveals a noticeable narrowing of the optical bandgap from 3.68 eV (BiW11) to 3.45 eV (Zn-BiW11), indicating enhanced photo-absorption capability under UV irradiation. Photodegradation experiments demonstrate that Zn-BiW11 exhibits superior activity toward both dyes, achieving degradation efficiencies of 65.8% for CR and 76.1% for PR, following pseudo-first-order kinetics. The faster degradation of PR compared to CR is attributed to differences in molecular structure, charge distribution, and dye-surface interaction. A plausible photodegradation mechanism involving photo-induced reactive oxygen species is proposed based on optical excitation and dye-specific reactivity. The results highlight the effectiveness of Zn-modified POMs as photoactive systems for investigating the photodegradation of dyes and for elucidating structure-reactivity relationships.