The morphology and crystal structure of Pt films grown by pulsed laser deposition (PLD) on yttria-stabilized zirconia (YSZ)at high temperatures Tg = 900 °C was studied for four different film thicknesses varying between 10 and 70 nm. During the subsequent growth of the capping layer, the thermal stability of the Pt was strongly influenced by the Pt film’s thickness. Furthermore, these later affected the film morphology, the crystal structure and hillocks size, and distribution during subsequent growth at Tg = 900 °C for a long duration. The modifications in the morphology as well as in the structure of the Pt film without a capping layer, named also as the as-grown and encapsulated layers in the bilayer system, were examined by a combination of microscopic and scattering methods. The increase in the thickness of the deposited Pt film brought three competitive phenomena into occurrence, such as 3D–2D morphological transition, dewetting, and hillock formation. The degree of coverage, film continuity, and the crystal quality of the Pt film were significantly improved by increasing the deposition time. An optimum Pt film thickness of 70 nm was found to be suitable for obtaining a hillock-free Pt bottom electrode which also withstood the dewetting phenomena revealed during the subsequent growth of capping layers. This achievement is crucial for the deposition of functional bottom electrodes in ferroelectric and multiferroic heterostructure systems.
14 September 2017 in Journal of Physics D: Applied Physics
Ferromagnetic Fe 40 Co 37 Zr 11 N 12 films in a multilayer arrangement with non-ferromagnetic Ti–Al–N seed- or/and capping layers were fabricated by reactive magnetron sputtering and post-annealed at 400 °C for 1 h in a static magnetic field, in order to induce an in-plane uniaxial anisotropy. The focus of the paper aims at the high-frequency suitability which is influenced by various damping mechanisms. These damping mechanisms were class-divided into an intrinsic part characterised by the damping parameter αint and extrinsic damping αext which comes from two-magnon scattering at inhomogeneity, at seed layers or/and capping layers as well as the interaction of the magnetic electrons with the electrons of the non-ferromagnetic capping layers acting as a spin sink. The experimental resonance line data are mapped on the effective damping parameter αeff of the Landau–Lifschitz–Gilbert differential equation and is simply a summation of αeff = αint + αext . By the variation of the ferromagnetic film thickness investigations have shown that it is convenient to subdivide extrinsic damping into two additional parameters which separately describe spin sink features and the two-magnon processes. By means of the experimental and theoretical consideration a minimum of the effective damping for a film thickness between 100 and 200 nm could be observed. It is demonstrated that the damping parameters can be correlated with the full width at half maximum of the imaginary part of the frequency-dependent permeability at ferromagnetic resonance which enables the various damping parameters to be attributed to the particular line broadening contributions.