Xiangran Meng

Dr. Xiangran Meng

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
GLGang Li
Gang Li
XMXiangran Meng
Xiangran Meng
CGChunpin Geng
Chunpin Geng
王铄王 崇 铄
王 崇 铄
HRHaifang Ren
Haifang Ren
TYTao Ying
Tao Ying
CoCrFeNi high-entropy alloys represent a novel structural material with considerable application potential in a variety of fields, including aerospace, automobiles, ships, machining, energy, soft magnetic materials, and hydrogen storage materials. The present study investigates the impact of the Al element on the structure and properties of the alloy. The preparation of the AlxCr1−xCoFeNi (x = 0.1, 0.2, 0.3, 0.4, 0.5) powders involved the use of a variety of elemental metal powders as raw materials and a mechanical alloying process at 350 rpm for 40 h. The sintering of the alloy powders was subsequently conducted using spark plasma sintering at 1000 °C. The microstructure of the alloys was analyzed using XRD, SEM, and EDS, and the properties were analyzed using a universal testing machine, a hardness measurement, friction and wear measurement, and an electrochemical workstation. The study shows that when x = 0.1, the crystal structure of Al0.1Cr0.9CoFeNi consists of a double FCC phase and a trace amount of σ phase. As the aluminum content increases, part of the FCC phase begins to transform to BCC. When x = 0.2~0.5, the alloy consists of a double FCC phase and a BCC phase and a trace amount of a sigma phase. As the BCC phase in the alloy increases, the tensile strength of the alloy increases, the ability to deform plastically decreases, and the hardness increases. The highest ultimate tensile strength of 1163.14 MPa is exhibited by Al0.5Cr0.5CoFeNi, while the minimum elongation is 26.98% and the maximum hardness value is 412.6 HV. In the initial stage of friction measurement, the wear mechanism of AlxCr1−xCoFeNi is adhesive wear. However, as the test time progresses, an oxide layer begins to form on the alloy’s surface, leading to a gradual increase in the friction coefficient. At this stage, the wear mechanism becomes a combination of both adhesive and abrasive wear. Once the oxidation process and the wear process have reached a dynamic equilibrium, the friction coefficient stabilizes, and the wear mechanism transitions to a state of abrasive wear. The Al0.1Cr0.9CoFeNi alloy demonstrates the lowest friction coefficient and wear rate, exhibiting values of 0.513 and 0.020 × 10−3 mm3/Nm, respectively, while the Al0.5Cr0.5CoFeNi alloy demonstrates the highest performance, with a self-corrosion voltage of 0.202 V in a 3.5 wt.% NaCl solution. The experimental findings demonstrate that, in the presence of a decline in the Cr element within a high-entropy alloy, an augmentation in the Al element can facilitate the transition of the FCC phase to the BCC phase within the alloy, thereby enhancing its mechanical properties. However, in the AlxCr1−xCoFeNi HEAs, the presence of the Cr-rich and Cr-poor phases invariably results in selective corrosion in a neutral NaCl solution. The corrosion resistance of this alloy is weaker than that of a single-phase solid solution alloy with a similar chemical composition that only undergoes pitting corrosion.

18 November 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
GLGang Li
Gang Li
XMXiangran Meng
Xiangran Meng
CGChunpin Geng
Chunpin Geng
崇王崇铄 王
崇铄 王
HRHaifang Ren
Haifang Ren
TYTao Ying
Tao Ying
The AlCoCrFeNi high entropy alloys are a novel structural material with wide application prospects. In order to investigate the influence of Al and Cr elements on the structure and properties of the alloys, AlxCr1-xCoFeNi (x=0.1, 0.2; 0.3, 0.4, 0.5) HEAs were prepared by mechanical alloying and spark plasma sintering. The microstructure and properties of the AlxCr1-xCoFeNi were analysed using XRD, SEM, EDS, electrochemical workstations, hardness measurement, friction and wear measurement, and room temperature compression measurement. The hardness and friction measurement results demonstrate that when x = 0.1, the crystal structure of Al0.1Cr0.9CoFeNi is composed of dual FCC phases and a trace of σ phase. With the increment of Al content, part of the FCC phase is transformed into BCC phase. When x=0.2~0.5, the alloy is composed of dual FCC phases, BCC phase and a trace σ phase. The Al0.5Cr0.5CoFeNi alloy exhibits the most favourable corrosion resistance, with a self-corrosion voltage of 0.202 V in a 3.5 wt.% NaCl solution. The hardness of alloy increases with the increasing of Al content. The Al0.5Cr0.5CoFeNi alloy exhibits the highest hardness value of 412.6 HV. At the initial stage of friction measurement, the wear mechanism of AlxCr1-xCoFeNi was adhesive wear. As the test time increased, oxide layers began to form on the surface of the alloy, resulting in a gradual increase in the coefficient of friction. At this stage, the wear mechanism was characterised by both adhesive and abrasive wear. Once the oxide layers and the wear processes reached dynamic equilibrium, the friction coefficient stabilised, and the wear mechanism transitioned to abrasive wear. Once the oxide layer and the wear process have reached dynamic equilibrium, the friction coefficient tends to stabilise gradually, and the wear mechanism is changed to abrasive wear. Al0.1Cr0.9CoFeNi has the smallest coefficient of friction of 0.513. Al0.5Cr0.5CoFeNi had the longest compression plateau and the greatest compression strain (59.7%) in the compression tests at room temperature.

20 July 2026 in Coatings
Verified
Journal Article
Open access
PDF file
SLSinan Li
Sinan Li
WDWei Dong
Wei Dong
适陈适宜 陈
适宜 陈
FLFudong Liu
Fudong Liu
XMXiangran Meng
Xiangran Meng
JZJingming Zhao
Jingming Zhao
Hard carbon (HC) is one of the most promising anode materials for sodium-ion batteries (SIBs). Yet its sodiation mechanism—particularly the origin of the sloping and plateau regions in the voltage–capacity curve—remains debated. In this work, first-principles density functional theory (DFT) calculations are employed to systematically investigate the sodium storage mechanism at the edges and within the interlayer ultramicropores of bilayer graphene nanoribbons (BGNRs) with zigzag (BGNRs-Z) and armchair (BGNRs-A) terminations. A series of edge models, including hydrogenated, dehydrogenated (dangling bond), monovacancy (MV), and divacancy (DV) defects, were constructed to elucidate the effects of edge type and defect species on Na adsorption and intercalation. Our results demonstrate that Na ions preferentially adsorb at the edges rather than in the interior interlayer regions. The zigzag edge exhibits stronger binding affinity toward Na than the armchair edge. Progressive Na intercalation gradually opens the edge interlayer spacing. It reduces the interlayer angle toward a parallel configuration and accompanies a stacking transition from AB to AA at higher Na concentrations. Edge dangling bonds significantly enhance Na binding and drive the initial separation of edge carbon layers, whereas surface MV and DV defects contribute to Na adsorption at lower binding strengths. The calculated voltage–capacity relationships reveal that the first sloping region (>1.0 V) is primarily associated with Na adsorption at zigzag and defective edges, the second sloping region (0.1–1.0 V) can be rationalized by combined surface defect adsorption and interlayer intercalation, and the low-voltage plateau (<0.1 V) is thermodynamically linked to Na filling of narrow slit pores with optimized interlayer distances (~4.0 Å for zigzag and ~4.3–5.8 Å for armchair edges). These findings establish a direct structure–property correlation between carbon microstructure (edge type, defect architecture, and pore geometry) and the electrochemical voltage profile, offering atomic-level insights for the rational design of high-performance carbon-based anodes for SIBs.