Gang Li

Dr. Gang Li


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 February 2025 in Materials
Verified
Journal Article
Open access
PDF file
GLGang Li
Gang Li
XMXiangran Meng
Xiangran Meng
CGChunpin Geng
Chunpin Geng
王铄王 崇 铄
王 崇 铄
HRHaifang Ren
Haifang Ren
TYTao Ying
Tao Ying
CoCrFeNi high-entropy alloys represent a novel structural material with considerable application potential in a variety of fields, including aerospace, automobiles, ships, machining, energy, soft magnetic materials, and hydrogen storage materials. The present study investigates the impact of the Al element on the structure and properties of the alloy. The preparation of the AlxCr1−xCoFeNi (x = 0.1, 0.2, 0.3, 0.4, 0.5) powders involved the use of a variety of elemental metal powders as raw materials and a mechanical alloying process at 350 rpm for 40 h. The sintering of the alloy powders was subsequently conducted using spark plasma sintering at 1000 °C. The microstructure of the alloys was analyzed using XRD, SEM, and EDS, and the properties were analyzed using a universal testing machine, a hardness measurement, friction and wear measurement, and an electrochemical workstation. The study shows that when x = 0.1, the crystal structure of Al0.1Cr0.9CoFeNi consists of a double FCC phase and a trace amount of σ phase. As the aluminum content increases, part of the FCC phase begins to transform to BCC. When x = 0.2~0.5, the alloy consists of a double FCC phase and a BCC phase and a trace amount of a sigma phase. As the BCC phase in the alloy increases, the tensile strength of the alloy increases, the ability to deform plastically decreases, and the hardness increases. The highest ultimate tensile strength of 1163.14 MPa is exhibited by Al0.5Cr0.5CoFeNi, while the minimum elongation is 26.98% and the maximum hardness value is 412.6 HV. In the initial stage of friction measurement, the wear mechanism of AlxCr1−xCoFeNi is adhesive wear. However, as the test time progresses, an oxide layer begins to form on the alloy’s surface, leading to a gradual increase in the friction coefficient. At this stage, the wear mechanism becomes a combination of both adhesive and abrasive wear. Once the oxidation process and the wear process have reached a dynamic equilibrium, the friction coefficient stabilizes, and the wear mechanism transitions to a state of abrasive wear. The Al0.1Cr0.9CoFeNi alloy demonstrates the lowest friction coefficient and wear rate, exhibiting values of 0.513 and 0.020 × 10−3 mm3/Nm, respectively, while the Al0.5Cr0.5CoFeNi alloy demonstrates the highest performance, with a self-corrosion voltage of 0.202 V in a 3.5 wt.% NaCl solution. The experimental findings demonstrate that, in the presence of a decline in the Cr element within a high-entropy alloy, an augmentation in the Al element can facilitate the transition of the FCC phase to the BCC phase within the alloy, thereby enhancing its mechanical properties. However, in the AlxCr1−xCoFeNi HEAs, the presence of the Cr-rich and Cr-poor phases invariably results in selective corrosion in a neutral NaCl solution. The corrosion resistance of this alloy is weaker than that of a single-phase solid solution alloy with a similar chemical composition that only undergoes pitting corrosion.

16 February 2026 in Materials
Verified
Journal Article
Open access
PDF file
HRHaifang Ren
Haifang Ren
GLGang Li
Gang Li
MWMinglei Wang
Minglei Wang
XZXiuyuan Zuo
Xiuyuan Zuo
To develop and design new alloy materials with lightweight and superior comprehensive performance. In this study, a MgAlTiVFeCo lightweight high-entropy alloy (LW-HEA) was fabricated via mechanical alloying and spark plasma sintering (SPS) to investigate the effects of sintering temperature on its phase structure, microstructure, densification, microhardness, high-temperature oxidation resistance, and corrosion resistance. The results indicate that the ball-milled MgAlTiVFeCo LW-HEA formed a simple solid solution phase with a BCC structure. After spark plasma sintering, the phase structure of the alloy changed, maintaining the BCC phase as the primary phase while accompanying the precipitation of secondary phases. When the sintering temperature reached 1000 °C, the alloy achieved a densification of 96.7% and a microhardness of 1235.5 HV. Its hardness value is comparable to the typical range of cemented carbides, demonstrating outstanding mechanical properties. The oxidation kinetics of MgAlTiVFeCo high-entropy alloys sintered at different temperatures at 900 °C follow a parabolic law, which is diffusion-controlled and can be divided into two stages: rapid growth and slow stabilization. At a sintering temperature of 1000 °C, the fitted oxidation rate constants, kp1 (0–25 h) and kp2 (25–60 h), are 3.76 × 10−2 mg2·cm−4·s−1 and 1.10 × 10−1 mg2·cm−4·s−1, respectively, outperforming those of alloys sintered at other temperatures. In a 3.5 wt% NaCl solution, the corrosion resistance of the alloy improves with increasing sintering temperature. Compared to alloys sintered at medium-to-low temperatures (850–950 °C), the alloy sintered at a high temperature (1000 °C) exhibits a more positive corrosion potential (−0.438 V) and a lower corrosion current density (1.07 × 10−6 A·cm−2), indicating excellent corrosion resistance. It is evident that 1000 °C is the optimal sintering temperature, and the MgAlTiVFeCo LW-HEA demonstrates superior comprehensive properties.

24 January 2025 in Crystals
Verified
Journal Article
Open access
PDF file
PQPengyuan Qi
Pengyuan Qi
GWGang Wang
Gang Wang
GLGang Li
Gang Li
SLShuai Li
Shuai Li
YLYang Liu
Yang Liu
PZPengfu Zhu
Pengfu Zhu
Nanoparticles of GdAlO3:Ce were synthesized with sodium dodecylbenzene sulfonate (SDBS) as the dispersant and ammonia as the precipitant by co-precipitation reaction to prepare precursors under different conditions. The phase composition of the precursors and the particle morphology were characterized by thermogravimetry-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The excitation and emission spectra of the resultant samples were analyzed using a photoluminescence spectroscope (PL). The results showed that the as-prepared, well-dispersed, nano-sized GdAlO3:Ce powder displayed spherical morphology at the initial concentration of metallic salt in liquor of 0.3 mol/L; the synthesized temperature was 0 °C, and it was calcined at 1300 °C for 2 h. The relative intensity of the photoluminescence peak had the maximum value when the Ce3+ dopant content was 0.9 mol% (mole fraction). The concentration quench occurred when the Ce3+ dopant content exceeded 0.9 mol%, and the peak of the excitation spectrum appeared at a wavelength of 381 nm.

3 December 2024 in Journal of Solid State Electrochemistry
Verified
Journal Article
Closed access
PDF file
GLGang Li
Gang Li
HRHaifang Ren
Haifang Ren
CGChunping Geng
Chunping Geng
Xiang WuXiang Wu
Xiang Wu

16 April 2025 in Journal of Materials Engineering and Performance
Verified
Journal Article
Closed access
PDF file
HRHaifang Ren
Haifang Ren
GLGang Li
Gang Li
QZQuanqing Zhang
Quanqing Zhang
PQPengyuan Qi
Pengyuan Qi
JBJing Bai
Jing Bai
FWFudong Wang
Fudong Wang

18 November 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
GLGang Li
Gang Li
XMXiangran Meng
Xiangran Meng
CGChunpin Geng
Chunpin Geng
崇王崇铄 王
崇铄 王
HRHaifang Ren
Haifang Ren
TYTao Ying
Tao Ying
The AlCoCrFeNi high entropy alloys are a novel structural material with wide application prospects. In order to investigate the influence of Al and Cr elements on the structure and properties of the alloys, AlxCr1-xCoFeNi (x=0.1, 0.2; 0.3, 0.4, 0.5) HEAs were prepared by mechanical alloying and spark plasma sintering. The microstructure and properties of the AlxCr1-xCoFeNi were analysed using XRD, SEM, EDS, electrochemical workstations, hardness measurement, friction and wear measurement, and room temperature compression measurement. The hardness and friction measurement results demonstrate that when x = 0.1, the crystal structure of Al0.1Cr0.9CoFeNi is composed of dual FCC phases and a trace of σ phase. With the increment of Al content, part of the FCC phase is transformed into BCC phase. When x=0.2~0.5, the alloy is composed of dual FCC phases, BCC phase and a trace σ phase. The Al0.5Cr0.5CoFeNi alloy exhibits the most favourable corrosion resistance, with a self-corrosion voltage of 0.202 V in a 3.5 wt.% NaCl solution. The hardness of alloy increases with the increasing of Al content. The Al0.5Cr0.5CoFeNi alloy exhibits the highest hardness value of 412.6 HV. At the initial stage of friction measurement, the wear mechanism of AlxCr1-xCoFeNi was adhesive wear. As the test time increased, oxide layers began to form on the surface of the alloy, resulting in a gradual increase in the coefficient of friction. At this stage, the wear mechanism was characterised by both adhesive and abrasive wear. Once the oxide layers and the wear processes reached dynamic equilibrium, the friction coefficient stabilised, and the wear mechanism transitioned to abrasive wear. Once the oxide layer and the wear process have reached dynamic equilibrium, the friction coefficient tends to stabilise gradually, and the wear mechanism is changed to abrasive wear. Al0.1Cr0.9CoFeNi has the smallest coefficient of friction of 0.513. Al0.5Cr0.5CoFeNi had the longest compression plateau and the greatest compression strain (59.7%) in the compression tests at room temperature.