Are microalgae a potential energy source for biofuel production? This paper presents the laboratory results from a Nannochloropsis sp. microalga biorefinery for the production of oil, high-value pigments, and biohydrogen (bioH2). The energy consumption and CO2 emissions involved in the whole process (microalgae cultivation, harvest, dewater, mill, extraction and leftover biomass fermentation) were evaluated. An economic evaluation was also performed. Oil was obtained by soxhlet (SE) and supercritical fluid extraction (SFE). The bioH2 was produced by fermentation of the leftover biomass. The oil production pathway by SE shows the lowest value of energy consumption, 177-245 MJ/MJ(prod), and CO2 emissions, 13-15 kgCO(2)/MJ(prod). Despite consuming and emitting c.a. 20% more than the SE pathway, the oil obtained by SFE, proved to be more economically viable, with a cost of 365€/kg(oil) produced and simultaneously extracting high-value pigments. The bioH2 as co-product may be advantageous in terms of product yield or profit.
1 November 2018 in Renewable and Sustainable Energy Reviews
Innovative technologies and sources of energy must be developed to replace fossil fuels and contribute to the reductions of emissions of greenhouse gases associated with their use. In this perspective, algal biofuels are generating substantial awareness in many countries. As of today, it has been shown that it is scientifically and technically possible to derive the desired energy products from algae in the laboratory. The question lies, however, in whether it is a technology that merits the support and development to overcome existing scalability challenges and make it economically feasible. In this context, the overall purpose of this study is to provide an integrated assessment of the potential of microalgae as a source to produce biofuels, while confronting it with competing emerging biofuel technologies. It is intended to provide a comprehensive state of technology summary for producing fuels from algal feedstocks and to draw some insights upon the feasibility and technoeconomic challenges associated with scaling up of processes.