Metal powder bed fusion (PBF) is an advanced metal additive manufacturing (AM) technology. Compared with traditional manufacturing techniques, PBF has a higher degree of design freedom. Currently, although PBF has received extensive attention in fields with high–quality standards such as aerospace and automotive, there are some disadvantages, namely poor process quality and insufficient stability, which make it difficult to apply the technology to the manufacture of critical components. In order to surmount these limitations, it is necessary to monitor the process. Online monitoring technology can detect defects in time and provide certain feedback control, so it can greatly enhance the stability of the process, thereby ensuring its quality of the process. This paper presents the current status of online monitoring technology of the metal PBF process from the aspects of powder recoating monitoring, powder bed inspection, building process monitoring, and melt layer detection. Some of the current limitations and future trends are then highlighted. The combination of these four–part monitoring methods can make the quality of PBF parts highly assured. We unanimously believe that this article can be helpful for future research on PBF process monitoring.

The manganese phosphate with high P–O–Mn connectivity shows a two-step relaxation process in two distinct spin glass states.

The use of hydrogel as a filling medium to recombine dispersed microencapsulated cells to form an embedded gel-cell microcapsule complex is a new idea based on bottom-up tissue construction, which is benefit for cell distribution and of great significance for tissue construction research in vitro. In this experiment, sodium alginate and chitosan were used as the main materials, rat normal liver cell BRL-3A was used as the model cell to prepare “artificial cells”. Silkworm pupa was used as raw material to extract silk fibroin solution, which was prepared by ultrasound to be the silk fibroin gel; silk fibroin hydrogel-microencapsulated hepatocyte embedded complex was then prepared by using silk fibroin gel as filling medium; the complex was cultured under three modes (static, shaking, and 3D microgravity), and the tissue forming ability of rat hepatocytes was investigated. The results showed that the microgravity culture condition can enhance the cell proliferation and promote the formation of cell colonies in the microcapsules; silk fibroin can form an embedded gel-cell microcapsule complex with microencapsulated cells, which provided mechanical support for the structure of the composite. We hope that this bottom-up construction system will have potential applications in the fields of cell culture and tissue construction.

The aim of this study was to investigate the low-temperature degradation (LTD) kinetics of tetragonal zirconia with 3 mol% yttria (3Y-TZP) dental ceramic using two degradation methods: hydrothermal degradation and immersed degradation. To study transformation kinetics, we prepared 3Y-TZP powders. We pressed these powders uniaxially into a stainless mold at 100 MPa. We then sintered the compacted bodies at intervals of 50 °C between 1300 °C and 1550 °C and immersed the specimens at various temperatures from 60 °C to 80 °C in 4% acetic acid or from 110 °C to 140 °C for the hydrothermal method. We used a scanning electron microscope (SEM) to confirm crystalline grain size and used X-ray diffraction to analyze the zirconia phase. As the sintering temperature increased, the calculated crystalline grain size also increased. We confirmed this change with the SEM image. The higher sintering temperatures were associated with more phase transformation. According to the Mehl–Avrami–Johnson equation, the activation energies achieved using the hydrothermal method were 101 kJ/mol, 95 kJ/mol, and 86 kJ/mol at sintering temperatures of 1450 °C, 1500 °C, and 1550 °C, respectively. In addition, the activation energies of the specimens immersed in 4% acetic acid were 60 kJ/mol, 55 kJ/mol, 48 kJ/mol, and 35 kJ/mol, with sintered temperatures of 1400 °C, 1450 °C, 1500 °C, and 1550 °C, respectively. The results showed that a lower sintering temperature would restrain the phase transformation of zirconia because of the smaller crystalline grain size. As a result, the rate of LTD decreased.

Two isostructural lanthanide-based coordination polymers, namely, {[Gd₂(H₂dhtp)₃(DMF)₂(H₂O)₄]·2DMF·H₂On (1) and {[Dy₂(H₂dhtp)₃(DMF)₂(H₂O)₄]·2DMF·H₂O}n (2) (H₄dhtp = 2,5-dihydroxyterephthalic acid, DMF = N, N-dimethylformamide) were synthesized and structurally characterized by single-crystal X-ray diffraction, IR, powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), and elemental analysis. Compounds 1 and 2 exhibited 3D networks and isostructures, except for the distinction of the metal ion. Magnetic measurements indicated that complex 1 exhibited the dominating contribution at low temperature of zero-field splitting for Gd(III) materials, and the complex 2 shown the depopulation of the excited excited state for Dy(III) material. The solid luminescent properties of H₄dhtp, 1, and 2 displayed a blue emission band, while the solution state luminescent properties all demonstrated a green emission band. The combination of luminescence sensing and magnetism in single-phase coordination polymers may offer great potential applications in smart multitasking devices.

Aging of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) under wet conditions is known as low-temperature degradation (LTD), which is associated with phase change and decreasing mechanical strength. Herein, we studied the effects of different surface treatments on the LTD of three different commercial Y-TZP blocks utilizing CAD/CAM technology, namely, Cercon^®, e.max^® ZirCAD, and Vita In-ceram^® YZ. The blocks were immersed in 4% acetic acid at 80 °C for 0, 7, 14, and 28 days. The effects of surface treatments such as sandblasting and polishing were also examined. The results showed that the monoclinic phase increased with immersion time in all three brands. In Cercon^® blocks, a minimal amount of phase transformation was observed, with the smallest amount of degradation after immersion. Sandblasting and polishing both suppressed phase transformation. After immersion, the mechanical strength exhibited a small decrease with time. Accelerating the evaluation of the LTD of zirconia may effectively help with clinical applications.