The continuous discharge of organic dyes into freshwater resources poses a long-term hazard to aquatic life. The advanced oxidation Fenton process is a combo of adsorption and degradation of pollutants to detoxify toxic effluents, such as anti-bacterial drugs, antibiotics, and organic dyes. In this work, an activated attapulgite clay-loaded iron-oxide (A-ATP@Fe3O4) was produced using a two-step reaction, in which attapulgite serves as an enrichment matrix and Fe3O4 functions as the active degrading component. The maximum adsorption capacity (qt) was determined by assessing the effect of temperature, pH H2O2, and adsorbent. The results showed that the A-ATP@Fe3O4 achieves the highest removal rate of 99.6% under optimum conditions: 40 °C, pH = 3, H2O2 25 mM, and 0.1 g dosage of the composite. The dye removal procedure achieved adsorption and degradation equilibrium in 120 and 30 min, respectively, by following the same processes as the advanced oxidation approach. Catalytic activity, kinetics, and specified surface characteristics suggest that A-ATP@Fe3O4 is one of the most promising candidates for advanced oxidation-enrooted removal of organic dyes.
A series of porous silica materials coated with honeycomb-like magnesium silicate were prepared under hydrothermal conditions, using natural one-dimensional porous attapulgite as the template and a silicon source with different Mg/Si ratios, by adjusting the amount of MgCl2⋅6H2O and the attapulgite precursor and regulating pH. The influence of the Mg/Si ratios was carefully investigated on morphology, pore structure, and related adsorption actions toward methylene blue. The Langmuir isotherm and pseudo-second-order kinetic models were used to explain the adsorption behavior of methylene blue. The synthesized composite with the lowest magnesium content displayed the highest removal capability of 166.67 mg/g for methylene blue, with a zeta potential of −18.18 mV, a specific surface area of 310.4 m2/g, and an average pore size of 3.7 nm. The removal result was the synergetic adsorption between porous magnesium silicate grown on the surface and the rest of the silica, further indicating that the attapulgite is available as a silicon source and a rod-shaped template for magnesium silicate.
A carbon-modified attapulgite composite (C-AATP@CTAB) was synthesized via the hydrothermal method using citric acid as the carbon source and cetyltrimethylammonium bromide (CTAB) as a surface modifier for efficient rhodamine B (Rh-B) removal. Carbon modification elevated the composite’s specific surface area (212 m2/g) and negative surface charge (−38.21 mV), significantly enhancing dye adsorption capacity to 666.66 mg/g—nearly double that of unmodified ATP variants (360.4–386.8 mg/g). Kinetic studies confirmed pseudo-second-order adsorption kinetics, attributed to hydrogen bonding and van der Waals interactions between Rh-B and the composite. Under photo-Fenton conditions, C-AATP@CTAB achieved 99.8% Rh-B degradation within 20 min, demonstrating superior catalytic performance in heterogeneous Fenton/photo-Fenton systems. This work establishes a low-cost, high-efficiency adsorbent-catalyst hybrid derived from low-grade attapulgite, offering promising avenues for sustainable wastewater treatment.