Many years of foundry practice and much more accurate analytical methods have shown that sands with organic binders, in addition to their many technological advantages, pose risks associated with the emission of many compounds, including harmful ones (e.g., formaldehyde, phenol, benzene, polycyclic aromatic hydrocarbons, and sulfur), arising during the pouring of liquid casting alloys into molds, their cooling, and knock-out. The aim of this research is to demonstrate the potential benefits of adopting inorganic binders in European iron foundries. This will improve the environmental and working conditions by introducing cleaner and more ecological production methods, while also ranking the tested binders studied in terms of their harmful content. The article pays special attention to the analysis of seven innovative inorganic binders and one organic binder, acting as a reference for emissions of gases from the BTEX (benzene, toluene, ethylbenzene, and xylenes) and PAHs (polycyclic aromatic hydrocarbons) groups and other compounds such as phenol, formaldehyde, and isocyanates (MDI and TDI) generated during the mold pouring process with liquid metals. The knowledge gained will, for the first time, enrich the database needed to update the Reference Document on The Best Available Techniques for the Smitheries and Foundries Industry (SF BREF).
The foundry industry is responsible for the production of several potentially polluting and hazardous compounds. One of the major sources of pollution is the use of organic binders for the manufacturing of sand cores and sand moulds. To address this problem, in recent years, the use of low-emission products, known as inorganic binders, has been proposed. Their use in ferrous foundries, otherwise, is limited due to some problematic features that complicate their introduction in the manufacturing process, as often happens when a breakthrough innovation is introduced. In light of this, the aim of this work is to provide a Green Innovation Practice (GIP) to manage the introduction of green breakthrough innovations, as previously described, within an existing productive context. This practice was applied to better manage the experimental phase of the Green Casting Life Project, which aims to evaluate the possibility of using inorganic binders for the production of ferrous castings. After describing the state of the art of GIPs and their application in manufacturing contexts, the paper described the proposed GIP and its application to a real case consisting of testing inorganic binders in a ferrous foundry.