Polyetheretherketone (PEEK) has gained significant attention in biomedical applications due to its excellent mechanical properties and biocompatibility. In this work, the fabrication of electroactive poly(vinylidenefluoride-co-trifluoroethylene) (PVTF) coatings on PEEK surfaces to enhance osteogenesis is explored. PEEK substrates were prepared with different surface treatments to optimize adhesion, followed by PVTF coating through drop-casting and polarization. Morphological, chemical, and thermal characterizations revealed uniform β-phase crystallization in the PVTF layer, achieving a peak piezoelectric coefficient (d33) of 16 pC/N under a 4 kV polarization voltage. Cell culture experiments demonstrated improved biocompatibility, with polarized surfaces showing enhanced bone marrow mesenchymal stem cell (BMSC) adhesion, proliferation, and osteogenic differentiation. ALP activity, a key marker of osteogenesis, was significantly higher on polarized samples. Furthermore, the modified surfaces exhibited strong adhesion between PVTF and PEEK, as well as sustained surface potential in physiological conditions. These test results indicate that the PEEK/PVTF composite, with its enhanced electroactive properties and biocompatibility, shows great potential as an electroactive material for biomedical implants.
Piezoelectric materials can realize the mutual conversion of mechanical energy and electric energy, so they have excellent application prospects in the fields of sensors, energy collectors and biological materials. The poly(vinylidene fluoride) (PVDF)-based polymers have the best piezoelectric properties in the piezoelectric polymer, but they still have a large room for improvement compared with the piezoelectric ceramics. Improving their content of the polar β phase has become a consensus to polish up the piezoelectric performance. Most available studies construct hydrogen bonds or coulomb interactions between the surface of the dopant and molecular chains by doping, which promotes the molecular chains arrangement and thus facilitates the formation of the polar β phase. Recent studies show that the ordered arrangement of molecular chains is also important for piezoelectric properties. At present, the main way to improve the piezoelectric performance of PVDF is through doping or complex heat treatment process. Here, the poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) film was treated by directional heat treatment which used a heating table. Compared with uniform heat treatment like muffle furnace heat treatment, this simple vertical temperature gradient has many advantages for the content of the β phase and the crystallinity of P(VDF-TrFE). The results of the experiment showed that the content of the β phase of films remained at about 88%. When the film thickness was limited to 100 μm and the heat treatment temperature was limited to 200 °C, its crystallinity could reach 75% and the highest piezoelectric coefficient could reach 33.5 ± 0.7 pC/N. P(VDF-TrFE) films based on the experimental methods described above that show great potential for future applications in electronic devices and biomedical applications.