National Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
Auto-generated profile, based on publicly available information
Xuzhao He
National Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, China
The micromorphology of fillers plays an important role in tribological and mechanical properties of polymer matrices. In this work, a TiO2-decorated Ti2C3 (TiO2/Ti3C2) composite particle with unique micro-nano morphology was engineered to improve the tribological and thermo-mechanical properties of epoxy resin. The TiO2/Ti3C2 were synthesized by hydrothermal growth of TiO2 nanodots onto the surface of accordion-like Ti3C2 microparticles, and three different decoration degrees (low, medium, high density) of TiO2/Ti3C2 were prepared by regulating the concentration of TiO2 precursor solution. Tribological test results indicated that the incorporation of TiO2/Ti3C2 can effectively improve the wear rate of epoxy resin. Among them, the medium density TiO2/Ti3C2/epoxy nanocomposites gained a minimum wear rate. This may be ascribed by the moderate TiO2 nanodot protuberances on the Ti3C2 surface induced a strong mechanical interlock effect between medium-density TiO2/Ti3C2 and the epoxy matrix, which can bear a higher normal shear stress during sliding friction. The morphologies of worn surfaces and wear debris revealed that the wear form was gradually transformed from fatigue wear in neat epoxy to abrasive wear in TiO2/Ti3C2/epoxy nanocomposites. Moreover, the results of thermo-mechanical property indicated that incorporation of TiO2/Ti3C2 also effectively improved the storage modulus and glass transition temperature of epoxy resin.
Bone repair and regeneration have aroused widespread interest due to their potential usefulness in cases when bone self-healing is insufficient. In this work, a Poly(vinylidene fluoride-trifluoroethylene)-coated-Poly methyl methacrylate Janus membrane was prepared, where a P(VDF-TrFE) coating on a PMMA film serves as Janus-A to mediate cell growth behavior, owing to its electroactivity, and the PMMA film serves as Janus-B to inhibit soft-tissue growth. A P(VDF-TrFE) coating separated from the substrate was put above the PMMA film before the PMMA film had dried completely, and a Janus membrane formed because of the flowability and adhesion of the nonvolatile PMMA solution. Their bonding could withstand the pressure of the body fluids in the shear direction. Various crystallization substrates were also applied to modulate the P(VDF-TrFE) coating’s surface potentials, as the surface potential would further affect cellular response. It was also found that the responses of the bone marrow mesenchymal stem cells (BMSCs) and bone marrow macrophages (BMDMs) could be adjusted through surface potential modification. Such a Janus membrane could potentially be applied to a biological environment with the effect of both guiding bone regeneration and preventing soft tissue adhesion.
Electroactive biomaterials can influence the microenvironment between cells and a material’s surface by controlling surface electrical signals, thereby affecting cellular physiological activities. As the most commonly used ferroelectric polymer, Poly(vinylidene fluoride-trifluoroethylene) (PVTF) has attracted widespread attention due to its good stability, biocompatibility and mechanical properties. However, it has limitations such as non-degradability. In this study, PVTF nanoparticles (PVTF NPs), prepared using a phase separation method, were compounded with polylactide (PLA) to prepare PVTF NPs/PLA composite membrane (PN/PLA), which simultaneously achieved electroactivity and degradability. PVTF NPs containing ferroelectric β phase were evenly distributed on the PLA substrate, forming negative potential spots through corona polarization. The PLA substrate gradually degraded in a simulated body fluid environment. The negative surface potential provided by PVTF NPs in PN/PLA enhanced the adhesion, proliferation, and early-stage osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The electrical bioactivity and degradability could be joined together in this study, which is promising for tissue regeneration biomaterials, such as guided bone regeneration membrane.
In this work, a poly(vinylidenefluoride-co-trifluoroethylene) (PVTF) coating on a titanium (Ti) substrate was prepared, and Ti metal surfaces were treated by physical or chemical methods to achieve a high bonding strength with PVTF. Scanning electron microscopy (SEM), atomic force microscope (AFM), and static water contact angles (WCA) were used to characterize the Ti metal surfaces. Further, mechanical stretching testing was employed to measure the bonding strength of PVTF coatings. The possible mechanism for the improved bonding strength could be the higher OH concentrations on Ti metal surfaces, which could lead to the formation of chemical bonds with the F atom of PVTF chains. Finally, a CCK-8 analysis of bone marrow mesenchymal stem cells (BMSCs) cultured on the PVTF coatings confirmed that the physical and chemical treatments had no significant differences in biocompatibility. Such a PVTF coating on a Ti substrate showed the potential of biomedical metal implants.
In this work, nanocomposite membranes based on graphene and polylactide were evaluated for mechanical properties and biocompatibility. Single-layer graphene (SLG), graphene nanosheets (GNS), and poly L-lactic acid (PLLA) were prepared through layer-by-layer deposition and homogeneous mixing. The results revealed that PLLA/SLG nanocomposites and PLLA/GNS nanocomposites could show enhanced mechanical properties and biocompatibility. The addition of a tiny amount of SLG significantly improved Young’s modulus and tensile strength of the PLLA matrix by 15.9% and 32.8% respectively, while the addition of the same mass ratio of GNS boosted the elongation at break of the PLLA matrix by 79.7%. These results were ascribed to the crystallinity and interfacial interaction differences resulting from graphene incorporation. Also, improved biocompatibility was observed with graphene incorporation. Such nanocomposites membranes showed a lot of potential as environment-friendly and biomedical materials.
Piezoelectric materials can realize the mutual conversion of mechanical energy and electric energy, so they have excellent application prospects in the fields of sensors, energy collectors and biological materials. The poly(vinylidene fluoride) (PVDF)-based polymers have the best piezoelectric properties in the piezoelectric polymer, but they still have a large room for improvement compared with the piezoelectric ceramics. Improving their content of the polar β phase has become a consensus to polish up the piezoelectric performance. Most available studies construct hydrogen bonds or coulomb interactions between the surface of the dopant and molecular chains by doping, which promotes the molecular chains arrangement and thus facilitates the formation of the polar β phase. Recent studies show that the ordered arrangement of molecular chains is also important for piezoelectric properties. At present, the main way to improve the piezoelectric performance of PVDF is through doping or complex heat treatment process. Here, the poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) film was treated by directional heat treatment which used a heating table. Compared with uniform heat treatment like muffle furnace heat treatment, this simple vertical temperature gradient has many advantages for the content of the β phase and the crystallinity of P(VDF-TrFE). The results of the experiment showed that the content of the β phase of films remained at about 88%. When the film thickness was limited to 100 μm and the heat treatment temperature was limited to 200 °C, its crystallinity could reach 75% and the highest piezoelectric coefficient could reach 33.5 ± 0.7 pC/N. P(VDF-TrFE) films based on the experimental methods described above that show great potential for future applications in electronic devices and biomedical applications.