Self-sustained oscillatory systems enable autonomous motion through continuous interaction with ambient energy sources, positioning them as promising candidates for soft robotic actuation, energy conversion, and biomedical applications. However, their utility is often limited by inherent vibrations and frictional losses, which can lead to impaired efficiency and generate noise. To overcome these limitations, a continuously rotating disc mechanism is proposed, which exploits the photothermal response of liquid crystal elastomers (LCEs) under uniform illumination. The resulting temperature field within the material is obtained via photothermal modeling of the LCE. The rotational actuation torque is generated through mass displacement resulting from light-induced LCE contraction. Based on the above conditions, we establish the equilibrium conditions and critical thresholds for continuous motion and reveal a synergy between the thermal field and torque. Through the interplay of the temperature field and the actuating rotating moment, the system ultimately attains steady self-rotation. Therefore, the absorbed energy offsets damping losses. Numerical simulations reveal that the steady-state self-spinning and translational velocity are influenced by multiple parameters including incident heat flux, gravitational field strength, material contraction coefficient, LCE element dimensions, illumination geometry, and resistive torque. The proposed LCE disc configuration exhibits exceptional operational stability and minimal damping, which has potential for implementation in advanced soft robotic systems and mechanical energy conversion applications.
Light-responsive hydrogel-based oscillators typically exhibit small oscillation amplitudes because solvent diffusion is intrinsically slow, and their dependence on external periodic light modulation further results in limited amplitude, poor stability, and insufficient autonomy. Inspired by the trigger and sliding mechanism of the ancient crossbow, this study introduces an innovative system that integrates a sliding-block mechanism with time-delay feedback, breaking from conventional approaches that rely on hydrogel inertia or external modulation, within a purely theoretical and simulation-based framework. By establishing a nonlinear dynamic model coupling solvent diffusion, photoisomerization, and optical attenuation, this research shows through numerical simulations that the system can exhibit two distinct modes under constant illumination: a stable state and a self-sustained oscillatory state. The model predicts that the oscillation frequency can be flexibly tuned by varying key parameters, including the crosslinking density, Flory–Huggins interaction parameters of the spiropyran and hydrophilic polymer, ring-opening reaction rate, light intensity, fraction of light-sensitive molecules, and sliding displacement, whereas the initial absorption coefficient has only a minor influence. The slider displacement is also identified as an effective means to regulate the oscillation amplitude. Furthermore, the expansion force at the container bottom is predicted to oscillate synchronously with the hydrogel’s volume change. This theoretical framework represents a paradigm shift from “static small deformation” to “dynamic large-amplitude oscillation”, significantly enhancing the mechanical responsiveness of the material. This work provides a novel and controllable strategy for the conceptual design of autonomous light-driven micromechanical systems.
Self-oscillators convert constant external stimuli into sustained mechanical work, offering potential for applications such as soft robotics, energy absorption, and mechanical logic. However, the effective design of a light-driven self-oscillation system is challenging due to geometrically constrained deformation modes and the inherent rigidity of rectilinear light propagation paths. Notably, the mirror-reflected optical feedback loop decouples the feedback mechanism from geometric constraints imposed by deformation modes, enabling dynamic coupling independent of structural geometry. In this study, we introduce a geometry-flexible light feedback loop to drive a liquid crystal elastomer (LCE) self-oscillator. The system comprises an optically responsive LCE fiber, a spring, a mirror, and a perforated plate. By integrating the dynamic photon propagation path in light feedback routing with the dynamic deformation model of the LCE, we develop a dynamic theoretical model of the oscillator under constant illumination. Numerical simulations reveal two distinct patterns: static equilibrium and self-oscillation. Self-oscillation is generated by the light-induced contraction of LCE fiber segments illuminated by reflected light. Crucially, mirror-reflected light enables localized deformations anywhere along the fiber to contribute to global displacement feedback, thereby transcending the constraints of geometric deformation modes. This capability transcends the limitations posed by constrained geometric deformation modes, enabling adaptable control of the optical feedback loop through simple geometric alterations. This innovative approach circumvents the need for intricate structural feedback designs and separate energy harvesters, as well as actuator systems.
In this paper, the strategy of three scales was proposed to analyse strong stress distributions of key joints during the incremental launching construction. Firstly, the internal forces and reaction forces were obtained by the finite element method (FEM). Secondly, some key joints were separated from the whole structure. The displacements and boundary conditions of the separated joint were taken from the results of the FEM. Then the stress distributions of the separated joint were successfully obtained by using the FEM. Thirdly, the local stress concentration areas were separated from the key joint structure. The high stress distributions of the local stress concentration region were successfully obtained by using the extended boundary element method (XBEM). On the other hand, the stress of some joints were measured through mechanical test on the construction site. And calculation results of the FEM and XBEM were in good agreement with test results. A multi-scale method is developed to obtain the strong stress concentration during the construction of the super-spanned steel truss bridge accurately, which enables the safety of the construction. In addition, the present method can be further used to guide the design of super-tall building, super-spanned bridge, etc.