Self-sustained oscillations can directly absorb energy from the constant environment to maintain its periodic motion by self-regulating. As a classical mechanical instability phenomenon, the Euler compression rod can rapidly release elastic strain energy and undergo large displacement during buckling. In addition, its boundary configuration is usually easy to be modulated. In this paper, we develop a self-sustained Euler buckling system based on optically responsive liquid crystal elastomer (LCE) rod with different boundary constraints. The buckling of LCE rod results from the light-induced expansion and compressive force, and the self-buckling is maintained by the energy competition between the damping dissipation and the net work done by the effective elastic force. Based on the dynamic LCE model, the governing equations for dynamic Euler buckling of the LCE rod is formulated, and the approximate admissible trigonometric functions and Runge-Kutta method are used to solve the dynamic Euler buckling. Under different illumination parameters, there exists two motion modes of the Euler rod: the static mode and the self-buckling mode, including alternating and unilateral self-buckling modes. The triggering conditions, frequency, and amplitude of the self-sustained Euler buckling can be modulated by several system parameters and boundary constraints. Results indicate that strengthening the boundary constraint can increase the frequency and reduce the amplitude. It is anticipated that this system may open new avenues for energy harvesters, signal sensors, mechano-logistic devices, and autonomous robots.
Self-oscillation capable of maintaining periodic motion upon constant stimulus has potential applications in the fields of autonomous robotics, energy-generation devices, mechano-logistic devices, sensors, and so on. Inspired by the active jumping of kangaroos and frogs in nature, we proposed a self-jumping liquid crystal elastomer (LCE) balloon under steady illumination. Based on the balloon contact model and dynamic LCE model, a nonlinear dynamic model of a self-jumping LCE balloon under steady illumination was formulated and numerically calculated by the Runge–Kutta method. The results indicated that there exist two typical motion regimes for LCE balloon under steady illumination: the static regime and the self-jumping regime. The self-jumping of LCE balloon originates from its expansion during contact with a rigid surface, and the self-jumping can be maintained by absorbing light energy to compensate for the damping dissipation. In addition, the critical conditions for triggering self-jumping and the effects of several key system parameters on its frequency and amplitude were investigated in detail. The self-jumping LCE hollow balloon with larger internal space has greater potential to carry goods or equipment, and may open a new insight into the development of mobile robotics, soft robotics, sensors, controlled drug delivery, and other miniature device applications.
Self-oscillators convert constant external stimuli into sustained mechanical work, offering potential for applications such as soft robotics, energy absorption, and mechanical logic. However, the effective design of a light-driven self-oscillation system is challenging due to geometrically constrained deformation modes and the inherent rigidity of rectilinear light propagation paths. Notably, the mirror-reflected optical feedback loop decouples the feedback mechanism from geometric constraints imposed by deformation modes, enabling dynamic coupling independent of structural geometry. In this study, we introduce a geometry-flexible light feedback loop to drive a liquid crystal elastomer (LCE) self-oscillator. The system comprises an optically responsive LCE fiber, a spring, a mirror, and a perforated plate. By integrating the dynamic photon propagation path in light feedback routing with the dynamic deformation model of the LCE, we develop a dynamic theoretical model of the oscillator under constant illumination. Numerical simulations reveal two distinct patterns: static equilibrium and self-oscillation. Self-oscillation is generated by the light-induced contraction of LCE fiber segments illuminated by reflected light. Crucially, mirror-reflected light enables localized deformations anywhere along the fiber to contribute to global displacement feedback, thereby transcending the constraints of geometric deformation modes. This capability transcends the limitations posed by constrained geometric deformation modes, enabling adaptable control of the optical feedback loop through simple geometric alterations. This innovative approach circumvents the need for intricate structural feedback designs and separate energy harvesters, as well as actuator systems.
5 October 2023 in International Journal of Solids and Structures