The goal of this research was to employ copper-doped zinc oxide nanoparticles (Cu/ZnONPs) as an adsorbent to remove the potentially toxic azo dye Congo red (CR). The Cu/ZnONPs were made using a chemical coprecipitation method, and their characteristics were examined using XRD, SEM, EDS, and FTIR methods. The response surface methodology (RSM) central composite design (CCD) is used to optimize the operational parameters agitation time, adsorbent dosage, solution pH, and initial concentration of CR solution during the adsorption process. The agitation period of 29.48min, the Cu/ZnONP dosage of 0.301g/L, the solution pH of 6.96, and the CR initial concentration of 90mg/L resulted in a maximum CR adsorption of 94.14 and a desirability of 0.976. The kinetic findings fit the pseudo-second-order kinetic equation, and the equilibrium data agreed with the Langmuir isotherm (maximum uptake capacity qmax=250mg/g). During the thermodynamic experiments, endothermic, spontaneous, and physical adsorptions were observed.
Wastewater containing dye is usually treated by physical, chemical or biological treatment processes. Adsorption process is one of the effective and efficient techniques that have been successfully employed for colour removal from wastewater. The aim of the present study is to remove methylene mlue (MB) dye from its aqueous solution using Grevillea robusta silver nanoparticles (GR-Ag-NPs) as adsorbent. The variables covered were contact time, solution pH, adsorbent dosage, initial dye concentration and temperature. The adsorbents were characterised by using scanning electron microscopy (SEM), for its surface functional groups using Fourier Transform Infrared Spectroscopy (FTIR); furthermore response surface methodology (RSM) was adopted to study the correlations among the process variables affecting the process and to optimise the process to give higher % dye removal.