Membranes were assessed on a bench scale for their performance in methylene blue dye separation. The sawdust, along with Brazilian clay and kaolin, were mixed and compacted by uniaxial pressing and sintered at 650 °C. The membranes were characterized by several techniques, including X-ray diffraction, scanning electron microscopy, porosity, mechanical strength, water uptake, and membrane hydrodynamic permeability. The results demonstrated that the incorporation of sawdust not only altered the pore morphology but also significantly improved water permeation and dye removal efficiency. The ceramic membrane had an average pore diameter of 0.346–0.622 µm and porosities ranging from 40.85 to 42.96%. The membranes were applied to the microfiltration of synthetic effluent containing methylene blue (MB) and, additionally, subjected to investigation of their adsorptive capacity. All membrane variants showed high hydrophilicity (contact angles < 60°) and achieved MB rejection efficiencies higher than 96%, demonstrating their efficiency in treating dye-contaminated effluents. Batch adsorption using ceramic membranes (M0–M3) removed 34.0–41.2% of methylene blue. Adsorption behavior fitted both Langmuir and Freundlich models, indicating mixed mono- and multilayer mechanisms. FTIR confirmed electrostatic interactions, hydrogen bonding, and possible π–π interactions in dye retention.
The research describes a sustainable approach for the synthesis of zeolite NaA using kaolin as an alternative source of silica. The main objective of this research was to prepare NaA zeolite using metakaolin derived from kaolin from the state of Rio Grande do Norte, Brazil, as an alternative source of silica, reducing the production cost and evaluating its thermal stability. In addition, a study of the thermal stability of the zeolite and cost estimates for zeolite production were carried out. Traditional methods of zeolite synthesis, mainly through hydrothermal processes, are often associated with high costs, waste generation, and negative environmental impacts. This work addresses these concerns by exploring a more sustainable approach. The kaolin used in the study was characterized by X-ray diffraction, energy-dispersive X-ray fluorescence spectroscopy, infrared spectroscopy, and thermogravimetry. These techniques help confirm the composition and properties of the raw material. NaA zeolite was synthesized by replacing sodium silicate with metakaolin using the hydrothermal synthesis method. The NaA zeolite was characterized by XRD and IR, which helped verify its purity and structural order. The study's results demonstrated that kaolin waste mainly consists of kaolinite, which suggests that it can be effectively used as a source of silica. Furthermore, the research successfully produced low-cost NaA zeolite in a relatively short synthesis time, achieving high purity and structural order. The study highlights the potential of using kaolin waste as a sustainable source of silica for zeolite production, helping to minimize environmental impacts and reduce processing costs compared to traditional methods. This work presents a promising and sustainable method for producing NaA zeolite from kaolin waste, which has the potential to contribute to cost reduction, waste reduction, and improved environmental sustainability in zeolite production processes. This research is aligned with the broader goals of reducing the ecological footprint of industrial processes while maintaining product quality and efficiency.
A sociedade vem sendo exposta a diversos tipos de poluentes químicos. Tanto de natureza orgânica, quanto inorgânica. Isto por conta da crescente demanda industrial e tecnológica, as quais muitas vezes descartam lixos sem nenhum tratamento prévio. Assim, o desenvolvimento de pesquisas neste sentido vem ganhando cada vez mais espaço, na tentativa de se obter novas formas de minimização desses impactos ambientais provocados por diversas formas de poluição. As legislações vigentes também estão cada vez mais atentas às várias maneiras de proteção dos ecossistemas. O objetivo inicial deste trabalho foi estudar os efeitos da concentração inicial (Ci) e pH na remoção de íons chumbo pela argila chocolate B natural e modificada termicamente a 500 ºC em sistema de banho finito. Foi adotado um planejamento fatorial 22 + 3 pontos centrais, totalizando sete ensaios, em que foi avaliada a resposta percentual de remoção (%Rem) sobre o pH e Ci. A argila chocolate B (natural e modificada) foi caracterizada por meio das técnicas de difratometria de raios X (DRX), capacidade de troca de cátions (CTC) e adsorção física de nitrogênio. Observou-se por meio dos resultados de caracterizações que a argila chocolate B é pertencente ao grupo das esmectitas e que ocorreram modificações na estrutura desta quando modificada termicamente. Os efeitos das variáveis Ci, pH e interação foram significativos sobre a resposta %Rem para a argila natural, enquanto que apenas o pH teve efeito sobre a argila modificada.