The combination of paraffin wax and O,O′-bis(2-aminopropyl) polypropylene glycol–block–polyethylene glycol–block–polypropylene glycol was used as a phase-change material (PCM) for the controlled delivery of curcumin. The PCM was combined with a graphene-based heater derived from the laser scribing of polyimide film. This assembly provides a new approach to a smart patch through which release can be electronically controlled, allowing repetitive dosing. Rather than relying on passive diffusion, delivery is induced and terminated through the controlled heating of the PCM with transfer only occurring when the PCM transitions from solid to liquid. The material properties of the device and release characteristics of the strategy under repetitive dosing are critically assessed. The delivery yield of curcumin was found to be 3.5 µg (4.5 µg/cm2) per 3 min thermal cycle.
Polyaniline has been utilized in various applications, yet its widespread adoption has often been impeded by challenges. Composite systems have been proposed as a means of mitigating some of these limitations, and anthranilic acid (2-aminobenzoic acid) has emerged as a possible moderator for use in co-polymer systems. It offers improved solubility and retention of electroactivity in neutral and alkaline media, and, significantly, it can also bestow chemical functionality through its carboxylic acid substituent, which can greatly ease post-polymer modification. The benefits of using anthranilic acid (as a homopolymer or copolymer) have been demonstrated in applications including corrosion protection, memory devices, photovoltaics, and biosensors. Moreover, this polymer has been used as a versatile framework for the sequestration of metal ions for water treatment, and, critically, these same mechanisms serve as a facile route for the production of catalytic metallic nanoparticles. However, the widespread adoption of polyanthranilic acid has been limited, and the aim of the present narrative review is to revisit the early promise of anthranilic acid and assess its potential future use within modern smart materials. A critical evaluation of its properties is presented, and its versatility as both a monomer and a polymer across a spectrum of applications is highlighted.
Stoma surgery can be critical in helping to restore the well-being of patients suffering from gastrointestinal disease or injury but it inevitably comes with numerous psychological and physiological complications. Disposable pouch systems which enable the collection of bowel waste have revolutionized stoma care but providing robust, discreet devices that can efficiently meet the requirements of the patient can be challenging. Pouches must securely store a microbially active waste whilst preventing leakage, protecting the underlying skin from inflammation and minimizing odor. All of this needs to be achieved within the design constraints of a pouch that is easy to manage and yet still maintains a discreet body contour. Stoma collection has moved from the waste being collected in butyl rubber pouches to much more elaborate systems incorporating assemblies of polyvinylidene chloride, ethylene vinyl acetate, ethyl vinyl alcohol and polyvinyl alcohol with new, skin-friendly adhesive such as hydrocolloid and silicones impregnated with ceramides and aloe. Moreover, 3D printing has emerged as a means of providing personalized stoma pouches that can potentially address the age-old issue of leakage. Despite such advances, stoma pouches have evolved slowly over the past 70 or so years. A survey of the literature reveals an abundance of quality-of-life studies but a dearth of reports addressing the key technological challenges. Consequently, this narrative review considers current stoma pouch technology and highlights the issues that continue to afflict stoma patients. Research and patent literature is critically appraised in terms of current pouch technology and the potential opportunities for new composite materials are identified.
Unrefined psyllium husk derived from Plantago ovata constitutes a complex mixture of water-soluble and insoluble polymeric chains that form an interpenetrating network capable of entrapping carbon nanoparticles. While the resulting composite was found to swell in aqueous electrolyte, it exhibited hydrogel-like properties where the electrochemical activity was retained and found to be stable upon repetitive voltammetric cycling. Planar film systems were characterized by electron microscopy, Raman spectroscopy, tensile testing, gravimetric analysis, contact angle and cyclic voltammetry. A key advantage of the composite lies in its ability to be cast in 3D geometric forms such as pyramidal microneedle arrays (700 μm high × 200 μm base × 500 μm pitch) that could serve as viable electrode sensors. In contrast to conventional composite electrode materials that rely on non-aqueous solvents, the psyllium mixture is processed entirely from an aqueous solution. This, along with its plant-based origins and simple processing requirements, provides a versatile matrix for the design of biodegradable electrode structures that can be manufactured from more sustainable sources.
Objectives: The prevalence of stoma formation in the United Kingdom has risen markedly over the past decade, yet comparatively little is known about national prescribing patterns for ostomy products. A retrospective cross-sectional observational study was conducted in which the UK Prescription Cost Analysis (PCA) data for 2023 were examined to assess what information can be extracted from these datasets, to evaluate inter-nation variation in prescribing, and identify areas warranting further health economics and policy investigation. Methods: PCA data for calendar year 2023 were collated from the four devolved UK health services. Data on product type, manufacturer, quantities dispensed, and cost were compared across nations and product categories. Results: Total UK prescription spend on ostomy products in 2023 was £457 million, 3.4% of overall NHS prescription expenditure. Pouches accounted for 72% (£329 million) of spend, with the remainder supporting peristomal skin health and appliance adhesion. Estimated average per-patient spend was modelled and varied substantially by nation, from £1073 in Wales to £2354 in England, against a UK average of £2243. Persistent prescribing of ancillary items no longer recommended for routine use (filters, deodorants, bag covers) accounted for an estimated £ 8 million (>2% of spend). Conclusions: PCA data represent an underutilized resource for population-level analysis of ostomy care. Marked inter-nation variation in expenditure, uncertainty surrounding ostomate population estimates, and the continued prescribing of ancillary items not recommended for routine use identify important evidence gaps and generate hypotheses for future research with direct relevance to prescribing policy, resource allocation, and equitable access to care across the United Kingdom.