This paper presents the design of a voltage-mode three-input single-output multifunction first-order filter employing commercially available LT1228 IC for easy verification of the proposed circuit by laboratory measurements. The proposed filter is very simple, consisting of a single LT1228 as an active device with two resistors and one capacitor. The output voltage node is low impedance, resulting in an easy cascade-ability with other voltage-mode configurations. The proposed filter provides four filter responses: low-pass filter (LP), high-pass filter (HP), inverting all-pass filter (AP−), and non-inverting all-pass filter (AP+) in the same circuit configuration. The selection of output filter responses can be conducted without additional inverting or double gains, which is easy to be controlled by the digital method. The control of pole frequency and phase response can be conducted electronically through the bias current (I_B). The matching condition during tuning the phase response with constant voltage gain is not required. Moreover, the pass-band voltage gain of the LP and HP functions can be controlled by adjusting the value of resistors without affecting the pole frequency and phase response. Additionally, the phase responses of the AP filters can be selected as both lagging or leading phase responses. The parasitic effects on the filtering performances were also analyzed and studied. The performances of the proposed filter were simulated and experimented with a ±5 V voltage supply. For the AP+ experimental result, the leading phase response for 1 kHz to 1 MHz frequency changed from 180 to 0 degrees. For the AP− experimental result, the lagging phase response for 1 kHz to 1 MHz frequency changed from 0 to −180 degrees. The design of the quadrature oscillator based on the proposed first-order filter is also included as an application example.

The COVID-19 pandemic has heightened the need for 21st century skills, particularly computer and ICT literacy (CICT) in Thailand. This study aimed to develop a TPACK (Technological Pedagogical and Content Knowledge)-based blended learning model (BLM) to enhance CICT skills and academic performance among 179 Business Administration (BA) undergraduates in the 2022 academic year Computer and Information Applications course. Research instruments were designed and evaluated by experts. Over 18 weeks, qualitative and quantitative data were collected, with the qualitative data undergoing content analysis. Descriptive statistics were used to analyze quantitative data, comparing pretests, post-tests, and 2-week retests using a repeated measure ANOVA. One-sample t-tests were used to assess the model’s impact on CICT skills. The results showed a significant score improvement between tests, with the highest mean being seen in the 2-week retest. The BA-TPACK model significantly enhanced CICT skills, exceeding 80%. The students expressed high satisfaction, with the BA-TPACK model effectively enhancing CICT skills and academic achievement, recommending its integration into future computer and information courses. This study’s contribution lies in addressing the pressing need for CICT skills in the ‘new normal’. By developing and implementing a BLM grounded in the TPACK framework, this study not only enhances students’ CICT proficiency but also fills a crucial gap in the literature regarding effective pedagogical approaches to foster 21st century skills.

An alternative method for synthesising the sinusoidal oscillator based on series negative resistance-capacitance is presented in this paper. The proposed topology is constructed with the series negative resistance-capacitance circuit connected in parallel with a grounded resistor and capacitor. To validate the proposed method, a new grounded series negative resistance-capacitance simulator is also proposed as a subcircuit for synthesising the sinusoidal oscillator. The series negative resistance-capacitance simulator is based on a commercially available integrated circuit (IC), LT1228. The equivalent negative resistance and equivalent negative capacitance can be adjusted electronically using an external DC bias current. The sinusoidal oscillator that is synthesised using the proposed method consists of a single LT1228, two capacitors, and three resistors. The frequency and the condition of the oscillation are orthogonally adjusted. Also, the condition of oscillation is electronically controlled. The amplitude of the sinusoidal waveform is adjustable. In addition, the output voltage node of the proposed oscillator has a low impedance, which allows it to connect to other circuits without using an additional buffer. Both PSPICE simulation and experiment are used to validate the proposed circuits.

In this contribution, the design and analysis of an active multifunction biquad filter that provides five voltage-mode filtering configurations in the same core filtering circuit are presented. The design emphasizes using the commercially available ICs, LT1228, which are easy for off-the-shelf implementation and cheaper compared with the chip implementation. The proposed multifunction filter is realized from two commercial LT1228 ICs as the active function block, combined with five passive elements (three resistors and two capacitors) with three input voltage nodes and a single output voltage node. The following advantages are given for this design: (i) it provides high-pass (HP), low-pass (LP), band-stop (BS), band-pass (BP), and all-pass (AP) filtering functions; (ii) orthogonal and electronic tuning of the natural frequency and bandwidth (the quality factor: Q); (iii) output voltage node of the proposed circuit is low impedance; (iv) passband voltage gain is controllable; and (v) matching condition and extra double gain voltage-mode amplifier are not required. The effect of the parasitic element in LT1228 on the filter performance is analyzed and included to strengthen the design idea. The PSpice simulation results using LT1228 with ±5 V and the experimental results tested from the hardware implementation are given to prove the validity of the designed multifunction filter.

MULTIPLE-INPUT SINGLE-OUTPUT VOLTAGE-MODE MULTIFUNCTION FILTER BASED ON VDDDAS