Developing active electrocatalysts for water splitting is a great challenge due to slow four-electron transfer oxygen evolution reaction. Here, we report the effect of variable oxygen concentrations in sputtered RuO2 thin films on electrochemical performance. The impact of Ar/O2 ratios on the structural, chemical, and optical properties of sputtered RuO2 films is systematically investigated. The as-deposited amorphous RuO2 showed higher catalytic activity as compared to its annealed crystalline counterparts. The X-ray photoelectron spectroscopy results showed controlled stoichiometry with 20% oxygen. The electrochemical measurements of the RuO2 deposited with a 4:1 Ar:O2 ratio showed superior performance in cyclic voltammetry, linear sweep voltammetry, and Tafel slope. Transformation of as-deposited amorphous RuO2 into polycrystalline films is observed at 400 °C of annealing temperature. Film thickness is increased with increasing O2 concentration during deposition. This study highlights that sputtered RuO2 thin films with varying oxygen concentration during deposition can influence the electrocatalytic activities in water-splitting applications.
Titanium oxynitride (TiNO) thin films represent a multifaceted material system applicable in diverse fields, including energy storage, solar cells, sensors, protective coatings, and electrocatalysis. This study reports the synthesis of TiNO thin films grown at different substrate temperatures using pulsed laser deposition. A comprehensive structural investigation was conducted by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Non-Rutherford backscattering spectrometry (N-RBS), and X-ray absorption spectroscopy (XAS), which facilitated a detailed analysis that determined the phase, composition, and crystallinity of the films. Structural control was achieved via temperature-dependent oxygen in-diffusion, nitrogen out-diffusion, and the nucleation growth process related to adatom mobility. The XPS analysis indicates that the TiNO films consist of heterogeneous mixtures of TiN, TiNO, and TiO2 phases with temperature-dependent relative abundances. The correlation between the structure and electrochemical behavior of the thin films was examined. The TiNO films with relatively higher N/O ratio, meaning less oxidized, were more electrochemically active than the films with lower N/O ratio, i.e., more oxidized films. Films with higher oxidation levels demonstrated enhanced crystallinity and greater stability under electrochemical polarization. These findings demonstrate the importance of substrate temperature control in tailoring the properties of TiNO film, which is a fundamental part of designing and optimizing an efficient electrode material.
Titanium oxynitride (TiNO) thin films have attracted a lot of attention as a material system that is beneficial for a wide range of applications including, energy storage devices, solar cells, sensors, durable protective coatings, and electrocatalysis. This study reports the synthesis of TiNO thin films with controlled variation of the oxygen levels followed by a detailed structural investigation using X-ray diffraction (XRD), X-ray reflectivity (XRR), X-ray photon spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and Non-Rutherford backscattering spectrometry (N-RBS). These characterization methods allowed detailed analysis that identified phase, composition, and crystallinity of the films. Structural control was established through temperature dependent oxygen in-diffusion and nitrogen out-diffusion processes and adatom mobility associated nucleation growth processes. Our XPS analysis made it clear that the TiNO films are heterogeneous mixtures of TiN, TiNO, and TiO2 phases. We were able to examine correlations between the structure and electrochemical behavior of the films. Through these observations we noticed that the TiNO films with relatively higher N/O ratio, meaning less oxidized, were more electrochemically active than the films with lower N/O ratio (i.e. TiN films with more oxidized phase). The more oxidized films exhibited an increase in crystallinity and improved stability during electrochemical polarization. These findings underscore the significance of substrate temperature control in tailoring the properties of TiNO film, which is a fundamental part of designing and optimizing an efficient electrode material.