In tool and mold making, components are typically first pre-machined in a soft state with residual stock allowance, as economical production is not possible in a hardened state due to the enormous tool wear. This extends the process chain and therefore also the throughput times. This paper presents an innovative tool concept for a solid carbide end mill in order to be able to carry out roughing and finishing in a hardened state. First, the structure of the innovative solid carbide end mill is described. Afterwards, the results of experimental tests are presented and discussed. These describe the suitability of the tool concept and include further investigations that examine the influence of the helix angle on the process behavior during the machining of the tool steel Toolox 44. To evaluate the process behavior, the development of process forces, chip formation, tool wear and component quality over the tool life are analyzed.
Instable process behaviour is one of the biggest challenges in micromilling and has a significant impact on tool wear. This leads to reduced workpiece quality and higher scrap. Therefore, it increases the resource and energy consumption. This paper presents a new simulation method and uses the example of a micro ball end mill for machining X37CrMoV5-1 to show how tool deflection and process forces can be determined as a function of individual process parameters and how optimal process kinematics can be achieved. For this purpose, the individual modelling steps are presented and it is explicitly shown how the necessary characteristic values for the simulation can be determined experimentally.