Electric vehicles are becoming a mainstay of road transport. However, the uneven distribution of the electric vehicle charging piles in cities has led to the problem of “mileage anxiety”. This has become a significant concern of consumers in purchasing electric vehicles. At the same time, it also hinders the development of the electric vehicle industry. For this reason, this paper designs an electric vehicle energy mutual aid device. In the event that the power battery of an electric vehicle is low on energy and there are no suitable charging piles around, the device can also seek energy supplementation from surrounding electric vehicles with sufficient energy. This device should satisfy the characteristics of wide gain, high power, small size, and light weight. Firstly, the quadratic boost converter and its state space model are constructed. It uses only one electrical switching element to realize the light weight of the device, and it also provides wide voltage gain to fulfill the needs of electric vehicle charging. Secondly, an improved voltage mode controller is proposed to address the shortcomings of the conventional voltage mode controller of the quadratic boost converter. It avoids the tradeoff between the transient and steady-state performance due to the integration action of the conventional voltage mode controller. Also, this controller uses less feedback to make the controlled system output the required DC power, reducing the weight of the device. Finally, the effectiveness of the proposed energy mutual aid device is verified by simulations and experiments.
Distributed renewable sources are one of the most promising contributors for DC microgrids to reduce carbon emission and fuel consumption. Although the battery energy storage system (BESS) is widely applied to compensate the power imbalance between distributed generators (DGs) and loads, the impacts of disturbances, DGs, constant power loads (CPLs) and cyber attacks on this system are not simultaneously considered. Based on this, a distributed fuzzy output consensus control strategy is proposed to realize accurate current sharing and operate normally in the presence of denial of service (DoS) attacks and false data injection (FDI) attacks. Firstly, the whole model of the BESS in DC microgrids embedded into disturbance items, DGs, CPLs and resistive loads, is firstly built. This model could be further transformed into standard linear heterogeneous multi-agent systems with disturbance, which lays the foundation for the following control strategy. Then the model of FDI and DoS attacks are built. Meanwhile, the fuzzy logic controller (FLC) is applied to reduce the burden of communication among batteries. Based on these, a distributed output consensus fuzzy control is proposed to realize accurate current sharing among batteries. Moreover, the system under the proposed control in different cases is analyzed. Finally, the feasibility of the proposed control strategy is verified by numerical simulation results and experiment results.