Coarse clastic rocks of the upper Sha 4 Member in the northern Bonan Sag of the Bohai Bay Basin in eastern China are important hydrocarbon reservoirs. The deposits are tight reservoirs owing to the low porosity (less than 10%) and low permeability (less than 1 mD). Because of the strong heterogeneity, although the reserve in the northern Bonan Sag is remarkable, only 4.9% of the reserves are recovered. We have studied these tight reservoirs by linking diagenesis to sedimentary facies to help predict the distribution of high-quality tight reservoirs. Petrographic analysis is undertaken based on cores, thin sections, X-ray diffraction and scanning electron microscope, helpful to understand the impacts on tight reservoirs of sedimentary factors and diagenesis factors. Sedimentary microfacies, lithologic characteristics, reservoir property, diagenesis, and diagenetic minerals are studied. Coarse clastic rocks are deposited mainly in nearshore subaqueous fans and fan deltas. The multistage sandstones are the valid reservoirs of coarse clastic rocks and dominated by feldspathic litharenite, lithic arkose, and arkose. The reservoir property is poor principally owing to the strong compaction and cementation. Pores are composed of secondary pores and primary pores. The secondary pore, generated in the dissolution of detrital minerals and/or cements, is the major type of pores and important to porosity improvement. By linking diagenesis to sedimentary facies, it can be concluded that high-quality tight reservoirs of coarse clastic rocks of the upper Sha 4 Member in the northern Bonan Sag of Bohai Bay Basin in eastern China are associated with medium to coarse-grain sandstones, found in the middle part of underwater distributary channel deposits in fan deltas and in the middle part of underwater channel deposits in nearshore subaqueous fans, with abundant secondary porosity but low cement contents, vertically at depths ranging from 3500 to 4100 m.
A special type of sandstone in which carbonate rock fragments (CRFs) dominate the composition developed in the Upper Triassic Xujiahe Formation’s fourth member (Xu4) in the western Sichuan Basin, known as calcareous sandstone. Calcareous sandstones are widely distributed in the western Sichuan and is the main production target of tight sandstone gas in the Sichuan Basin. In this study, thin sections, porosity–permeability testing, scanning electron microscopy, and X-ray diffraction are applied to examine the characteristics and control factors for high-quality reservoirs in the calcareous sandstones, with a view to providing guidance for natural gas exploration and development in calcareous sandstones. The results show that the calcareous sandstone belongs to litharenite, with an average framework grain composition of 30% quartz, 1% feldspar, and 69% rock fragments, while the Xu4 sandstone has a high quartz content (average content of 71%). Primary intergranular pores are the main storage space, and the reservoir quality is quite poor. Under the influence of different parent rock properties of sandstones, there are obvious differences in the composition of framework grains between the calcareous sandstone and the ordinary Xu4 sandstone, which in turn affects the reservoir storage space, diagenesis, and reservoir quality. High-energy depositional conditions, low content of late cements, and the development of fractures are the main controlling factors for the formation of high-quality reservoirs in Xu 4 calcareous sandstones.
The Upper Triassic Xujiahe Formation in the western Sichuan Basin is rich in natural gas resources and is one of the main tight sandstone gas-producing layers in the Sichuan Basin. Taking the tight sandstone of the second member of the Xujiahe Formation (Xu-2 Member) in the western Sichuan Basin as the study target, based on the analysis of the rock sample, a thin section, scanning electron microscopy, inclusion, the carbon and oxygen isotope, the petrological characteristics, the reservoir properties, the diagenetic sequences, and the pore evolution processes were revealed. The tight sandstones are composed of litharenite, sublitharenite, and feldspathic litharenite with an average porosity of 3.81% and a permeability mainly ranging from 0.01 to 0.5 mD. The early to late diagenetic stages were revealed, and the diagenetic evolution sequence with five stages was constructed. The Xu-2 sandstones were subdivided into three different types, and each type has its own tightening factors and processes. In the quartz-rich sandstone, the compaction and pressure solution were the primary causes of reservoir tightening, while late fracturing and dissolution along fractures were the main factors improving reservoir properties. In the feldspar-rich sandstone, early dissolution was a primary factor in improving porosity, while carbonate and quartz cements generated by dissolution contributed to a decrease in porosity. In the rock-fragment-rich sandstone, chlorites formed in the early stage and dissolution were the main factors of reservoir quality improvement, while the authigenic quartz formed in the middle diagenetic stage was the primary cause of reservoir tightening. Four major source-to-sink systems were identified in the western Sichuan Basin and they have different reservoir characteristics and reservoir quality controlling factors. This study will contribute to a deeper understanding of the characteristics, diagenetic evolution, and tightening process of tight sandstone reservoirs, effectively promoting scientific research and the industrial development of tight sandstone gas in the Xu-2 Member of the Sichuan Basin.
In the western Tarim Basin, Carboniferous granular dolostones deposited on a carbonate platform contain a small amount of terrigenous materials of sand-size fraction, agglomerated clay minerals, or similar phases. However, the role of terrigenous materials on dolomitization is still unclear. The aim of this study was to reveal the dolomitization mechanism. The granular dolomites have small crystal size, earthy yellow color, and fabric-retentive texture, with relatively good order. These features indicate dolomites precipitated during early diagenesis. The ratio of rare earth elements (RREs) abundance of the stable isotopes 87Sr/86Sr relative to Post-Archean Australian Shale (PAAS) normalized patterns was used to study the source of the dolomitizing fluids. The composition of REEs is characterized by heavy rare earth (HREE) enrichment (average NdSN/YbSN = 0.83). There is a positive (La/La*)SN anomaly and slightly positive (Gd/Gd*)SN and (Y/Y*)SN anomaly; δ18O of seawater in fractionation equilibrium with granular dolostones was from −2.8‰ to 1.7‰ PDB, implying the dolomitizing fluid was contemporary, slightly evaporated seawater. The granular dolostones on the relatively thick shoals were subject to subaerial exposure before pervasive dolomitization, with evidence that the input of detrital kaolinite predated the formation of dolomites. Higher 87Sr/86Sr values and ∑REE in granular dolostones than the values in equivalent limestones indicate that dolomitization was related to terrigenous materials. Within the terrigenous materials, the negative-charged clay minerals may have catalyzed the dolomitization, resulting in dramatically decreased induction time for precipitation of proto-dolomites. A greater amount of terrigenous materials occurred on the shoals at the sea level fall, resulting from enhanced river entrenchment and downcutting. As a result, after subaerial exposure, the penesaline water flow through the limy allochems sediments lead to dolomitization, with the catalysis of illite on relatively thick shoals.