Most developing countries' electric power system is stressed by an unprecedented demand growth as well as obstacles that call for urgent actions. Therefore, tackling the present-day power-related challenges and ensure dependable and safe electricity may result in improving living conditions. This research aims to comprehend the primary factors that impede power companies in emerging economies and propose ways of addressing them with a focus on Togolese electricity system as a case study., The methodology utilized to study a complex and dynamic system like electricity sector is an integrated model composed of a survey and review of available literature, an interview with energy experts and the SWOT/PESTLE analysis to perform an in-depth and all-encompassing analysis. The study revealed that the electrification poverty was 39.47 % at countrywide level that requires an additional power of 220.95 MW to that of 2021 to achieve 100 % of electricity access by 2030. Moreover, the system's performance is hindered by a number of internal and external bottlenecks. They include but not limited to limitations in policies and regulations; technical difficulties in the transmission, distribution and off-grid subsystems; insufficient investments; and a lack of incentives and taxes rebates. In light of these findings, a model prioritizing a resilient power system was proposed for transforming the outdated power infrastructure in developing countries laying stress upon energy mix planning, transmission and distribution subsectors innovation and effective regional collaboration.

Optimal planning and design of microgrids are priorities in the electrification of off-grid areas. Indeed, in one of the Sustainable Development Goals (SDG 7), the UN recommends universal access to electricity for all at the lowest cost. Several optimization methods with different strategies have been proposed in the literature as ways to achieve this goal. This paper proposes a microgrid installation and planning model based on a combination of several techniques. The programming language Python 3.10 was used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. Four levels of study were carried out. The first level consisted of simulating the model obtained with a cluster, which is considered based on the elbow and k-means clustering method as a case study. The second level involved sizing the microgrid with a capacity of 40 kW and optimizing all the resources available on site. The example of the different resources in the Togo case was considered. At the third level, the work consisted of proposing an optimal connection model for the microgrid based on voltage stability constraints and considering, above all, the capacity limit of the source substation. Finally, the fourth level involved a planning study of electrification strategies based mainly on microgrids according to the study scenario. The results of the first level of study enabled us to obtain an optimal location for the centroid of the cluster under consideration, according to the different load positions of this cluster. Then, the results of the second level of study were used to highlight the optimal resources obtained and proposed by the optimization model formulated based on the various technology costs, such as investment, maintenance, and operating costs, which were based on the technical limits of the various technologies. In these results, solar systems account for 80% of the maximum load considered, compared to 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed based on the constraints of a voltage stability limit estimated to be 10% of the maximum voltage drop. The results obtained for the third level of study enabled us to present selective results for load nodes in relation to the source station node. Finally, the last results made it possible to plan electrification using different network technologies and systems in the short and long term. The case study of Togo was taken into account. The various results obtained from the different techniques provide the necessary leads for a feasibility study for optimal electrification of off-grid areas using microgrid systems.

The dynamic evolution and variation of electrical loads is now a priority for optimum management and, above all, forecasting. Indeed, these dynamic load variations require computer tools able to implement optimal load forecasting models. Scientific research into automated models for forecasting electrical loads therefore represents a challenge for scientific researchers. Several research studies have therefore been carried out. These include machine learning approaches such as: LSTM (Long Short-Term Memory), Support Vector Machine (SVM) and others. This article proposes a comparison study between a hybrid model based on the wavelet transform coupled with the adaboost method, and LSTM, for forecasting electricity consumption loads. Python 3.10 was used for the studies. The first results obtained consisted in the study of electricity load forecasts over four (04) data sets of the year (January, April, August and December). These results are very satisfactory, showing a good correlation between the real results of the electrical load consumption data, and the results of the implemented model. The electrical load consumption data are collected from a renewable energy production source: photovoltaic solar energy. The model test results (R2) obtained range from 0.919 to 0.958. These results are representative of real data and reflect the model's performance. The second set of results concerns a comparative study between the methods used by Y. Xie et al (CNN, MLP, LSTM-AM and LSTM-AM-MLP), and our approach. The prediction results obtained between the approaches show a prediction gap ranging from 0.15 to 0.78 for RMSE and 0.83 for MAPE. These results show significant differences between the methods. The minimization of errors by our model, therefore, reflects the model's performance in terms of accuracy, which is necessary for the optimal management of consumer electricity load forecasts in order to ensure balance between supply and demand.

Optimal planning and design of microgrids is a priority for electrification of off-grid areas. Indeed, according to one of the Sustainable Development Goals (SDG) 7, the UN recommends universal access to electricity for all but, at the lowest cost. To achieve this goal, several optimization methods with different strategies have been proposed in the literature. This paper proposes a microgrid installation and planning model based on a combination of several techniques. Python 3.10, the programming language, has been used in conjunction with machine learning techniques such as unsupervised learning based on K-means clustering and deterministic optimization methods based on mixed linear programming. These methods were complemented by the open-source spatial method for optimal electrification planning: onsset. The results obtained enabled us to simulate the model obtained, with a cluster considered as a case study, based on the elbow and k-means clustering method; then, in a second phase, to size the microgrid with a capacity of 40 kW, by optimizing all the resources available on the site: the example of the various resources in the case of Togo was considered (solar, wind, hydropower). This study therefore highlighted the optimal resources obtained by integrating battery systems by the optimization model formulated on the basis of the various technology costs, such as investment, maintenance and operating costs, based on the technical limits of the various technologies. For the optimum results obtained, solar systems account for 80% of the maximum load considered, compared with 7.5% for wind systems and 12.5% for battery systems. Next, an optimal microgrid connection model was proposed, based on the constraints of a voltage stability limit estimated at 10% of the maximum voltage drop. The substation capacity limit was also taken into account. The results obtained from the case studied enabled us again, to present selective results for load nodes in relation to the substation node. And finally, the spatial technology planning tool made it possible to obtain results on the different strategies for the various technologies required for the electrification planning study of the Togo case. The various results obtained from the different techniques provide the leads needed for a feasibility study for optimal electrification of off-grid areas, using microgrid systems.

Optimal management of renewable energy resources is a priority, especially in a global energy mix where fossil fuels are increasingly exploited. The major challenge associated with these renewable resources lies in their intermittency. Complementarity and optimal management of these resources are therefore essential. This article proposes a model for managing renewable energies in power grid systems with a storage system. The resulting model has been tested. Python 3.10 programming language was used to solve the optimization problem, using mixted integer linear programming. To test the model, a special case study was carried out in the South of Togo, representing almost 96% of the country's electrical loads. In this study, resources were first evaluated for one year, then compared according to their evolution over the years. The results showed that the country's energy potential is considerable, but unevenly distributed. The study showed that in the north and center of the country, solar energy and biomass are the main resources available. In the south, on the other hand, energy potential is based on solar, wind, hydro and biomass. The optimization results obtained for the south of the country have enabled to plan better the management of these resources over the course of the year. The results show a composition of maximum load satisfaction, with 39% from grid compared with 8% from hydro, 10% from wind, 12% from batteries systems and 31% from photovoltaic systems. The storage required for energy management is estimated at 220 kWh, with an optimal annual value for the objective cost function of around 67885.10212 USD. The model thus obtained provides a decision-making tool for the optimal management of renewable resources.