Jiajin Wang

Mr. Jiajin Wang


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
JZJian Zhang
Jian Zhang
JWJiajin Wang
Jiajin Wang
HLHongbo Li
Hongbo Li
QZQin Zhang
Qin Zhang
HXHe Xiangning
He Xiangning
JWJianwei Wu
Jianwei Wu
The thermal aging of insulation systems in electrical machines is a critical factor influencing their reliability and lifetime, particularly in modern high-performance electrical equipment. However, evaluating and predicting insulation lifetime under thermal aging poses significant challenges due to the complex aging mechanisms. Thermal aging not only leads to the degradation of macroscopic properties such as dielectric strength and breakdown voltage but also causes progressive changes in the microstructure, making the correlation between aging stress and aging indicators fundamental for lifetime evaluation and prediction. This review first summarizes the performance indicators reflecting insulation thermal aging. Subsequently, it systematically reviews current methods for reliability assessment and lifetime prediction in the thermal aging process of electrical machine insulation, with a focus on the application of different modeling approaches such as physics-of-failure (PoF) models, data-driven models, and stochastic process models in insulation lifetime modeling. The theoretical foundations, modeling processes, advantages, and limitations of each method are discussed. In particular, PoF-based models provide an in-depth understanding of degradation mechanisms to predict lifetime, but the major challenge remains in dealing with complex failure mechanisms that are not well understood. Data-driven methods, such as artificial intelligence or curve-fitting techniques, offer precise predictions of complex nonlinear relationships. However, their dependence on high-quality data and the lack of interpretability remain limiting factors. Stochastic process models, based on Wiener or Gamma processes, exhibit clear advantages in addressing the randomness and uncertainty in degradation processes, but their applicability in real-world complex operating conditions requires further research and validation. Furthermore, the potential applications of thermal lifetime models, such as electrical machine design optimization, fault prognosis, health management, and standard development are reviewed. Finally, future research directions are proposed, highlighting opportunities for breakthroughs in model coupling, multi-physical field analysis, and digital twin technology. These insights aim to provide a scientific basis for insulation reliability studies and lay the groundwork for developing efficient lifetime prediction tools.

9 June 2024 in Sensors
Verified
Journal Article
Open access
PDF file
MCMingxu Chen
Mingxu Chen
BZBingye Zhang
Bingye Zhang
HLHaibo Li
Haibo Li
XGXiang Gao
Xiang Gao
JWJiajin Wang
Jiajin Wang
JZJian Zhang
Jian Zhang
The direct-drive selective compliance assembly robot arm (SCARA) is widely used in high-end manufacturing fields, as it omits the mechanical transmission structures and has the advantages of high positioning accuracy and fast movement speed. However, due to the intensifying dynamic coupling problem of structures in the direct-drive SCARA, the permanent magnet synchronous motors (PMSMs) located at the joints will take on nonstationary loads, which causes excessive internal temperature and reduces the lifetime of PMSMs. To address these issues, the lifetime prediction of PMSMs is studied. The kinematic and dynamic models of the SCARA are established to calculate the torque curve required by the PMSM in specific typical motion tasks. Additionally, considering thermal stress as the main factor affecting lifetime, accelerated degradation tests are conducted on insulation material. Then, the reliability function of the PMSM is formulated based on the accelerated degradation model. Based on the parameters and working conditions of the PMSM, the temperature field distribution is obtained through simulation. The maximum temperature is used as the reference temperature to conduct reliability evaluation and lifetime prediction of the PMSM. The research results show that for a typical point-to-point task, the PMSM can run for 102,623 h while achieving the reliability requirement of 0.99.

26 March 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
JWJiajin Wang
Jiajin Wang
JWJianwei Wu
Jianwei Wu
JZJian Zhang
Jian Zhang
QZQin Zhang
Qin Zhang
YFYoutong Fang
Youtong Fang
Xiaoyan HuangXiaoyan Huang
Xiaoyan Huang
The degradation process of high-reliability products commonly has two-phase characteristics. For such products, accurate change point estimation and proper degradation model play crucial roles in remaining useful life (RUL) prediction. However, due to the long-lifetime nature of high-reliability products, lacking sufficient condition monitoring data will result in inaccurate parameter estimation, which further leads to a large error in RUL prediction. To address the issue, this paper proposes a RUL prediction method that integrates two-phase accelerated degradation data and field information. Specifically, change points are estimated based on accelerated degradation data, which effectively solves the difficulty of deriving the change point distribution owing to the lack of data. On this basis, a two-phase degradation model considering change point distribution is proposed by combining Wiener process and acceleration equation, which can be extrapolated to predict the lifetime at any stress level. In addition, taking the accelerated degradation data as prior information, all model parameters are updated by integrating field information using Bayesian method. When new change points are detected, their distribution is also updated to improve the accuracy of next individual RUL prediction. The effectiveness of the proposed method is validated through simulation studies and empirical analysis of motor insulation.

24 July 2025 in Sensors
Verified
Journal Article
Open access
PDF file
XHXianwu He
Xianwu He
XLXuhui Liu
Xuhui Liu
CLCheng Lin
Cheng Lin
MFMinjie Fu
Minjie Fu
JWJiajin Wang
Jiajin Wang
JZJian Zhang
Jian Zhang
To address the challenges posed by weak early fault signal features, strong noise interference, low diagnostic accuracy, poor reliability when using single information sources, and the limited availability of high-quality samples in practical applications for permanent magnet synchronous motor (PMSM) bearings, this paper proposes an early bearing fault diagnosis method based on Hippopotamus Optimization Variational Mode Decomposition (HO-VMD) and weighted evidence fusion of current–vibration signals. The HO algorithm is employed to optimize the parameters of VMD for adaptive modal decomposition of current and vibration signals, resulting in the generation of intrinsic mode functions (IMFs). These IMFs are then selected and reconstructed based on their kurtosis to suppress noise and harmonic interference. Subsequently, the reconstructed signals are demodulated using the Teager–Kaiser Energy Operator (TKEO), and both time-domain and energy spectrum features are extracted. The reliability of these features is utilized to adaptively weight the basic probability assignment (BPA) functions. Finally, a weighted modified Dempster–Shafer evidence theory (WMDST) is applied to fuse multi-source feature information, enabling an accurate assessment of the PMSM bearing health status. The experimental results demonstrate that the proposed method significantly enhances the signal-to-noise ratio (SNR) and enables precise diagnosis of early bearing faults even in scenarios with limited sample sizes.

31 July 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
QZQin Zhang
Qin Zhang
JWJianwei Wu
Jianwei Wu
JWJiajin Wang
Jiajin Wang
Xiaoyan HuangXiaoyan Huang
Xiaoyan Huang
YFYoutong Fang
Youtong Fang
JZJian Zhang
Jian Zhang
Currently, most existing remaining useful life (RUL) prediction models for generators’ main wall insulation (MI) focuses on the statistical life distributions for a large population of products. The shortcoming of these models is that they cannot incorporate individual degradation information of a single product. To address the challenge of fusing common and individual degradation information, this paper proposes a digital-twin-driven two-phase RUL prediction model, composing of three parts: common representation model (CRM), individual representation model (IRM), dynamic evolution model. The proposed digital twin framework integrates the Wiener process model, Kalman filtering (KF) algorithm, and support vector machine (SVM) model. Specifically, a CRM based on two-phase Wiener process was established to reflect common features. Then, with CRM acting as the state equation, an IRM was established based on KF, which can fuse MI’s individual degradation information with common degradation information to reflect the individual features of single product. Additionally, SVM is utilized to address the issue that the covariance matrix of KF algorithm cannot be updated in prediction domains of long-life products, achieving the dynamic evolution of the digital twin system. Finally, the effectiveness and engineering application value of the model were verified through experiments.

13 August 2025 in Computers & Industrial Engineering
Verified
Journal Article
Closed access
JWJiajin Wang
Jiajin Wang
JZJian Zhang
Jian Zhang
JWJianwei Wu
Jianwei Wu
QZQin Zhang
Qin Zhang
YFYoutong Fang
Youtong Fang
XHXiaoyan Huang
Xiaoyan Huang