Yuanjing Huang

Mr. Yuanjing Huang


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
XSxianda sun
xianda sun
LSLimin Suo
Limin Suo
YHYuanjing Huang
Yuanjing Huang
HWHongyu Wang
Hongyu Wang
HYHan Yu
Han Yu
TLTao Liu
Tao Liu
After polymer flooding, the heterogeneity between different layers intensifies, forming intricate seepage channels and fluid diversions, which results in decreased circulation efficiency and lower recovery rates, leaving a significant amount of residual oil trapped within the reservoir. Understanding the characteristics of residual oil occurrence is crucial for enhancing oil recovery post-polymer flooding. This study focused on sandstone reservoirs with varying permeability in the Saertu block of the Daqing oilfield. Using cryosectioning and laser scanning confocal microscopy, the occurrence characteristics of the residual oil in these sandstone reservoirs post-polymer flooding were investigated. Additionally, micro-CT and scanning electron microscopy were employed to analyze the impact of the pore structure on the distribution characteristics of the residual oil. The results indicate that laser scanning confocal images reveal that post-polymer flooding, the residual oil in high- and low-permeability sandstone reservoirs predominantly exists in a bound state (average > 47%), mostly as particle-adsorbed oil. In contrast, the residual oil in medium-permeability reservoirs is primarily in a free state (average > 49%), mostly as intergranular-adsorbed oil. In high-permeability sandstone reservoirs, heavy oil components are mainly in a particle-adsorbed form; in medium-permeability sandstone reservoirs, residual oil predominantly consists of heavy components, with most light components occurring in a clustered form; in low-permeability sandstone reservoirs, clustered residual oil exists in a balanced coexistence of light and heavy components, while the heavy components primarily exist in a particle-adsorbed form. Post-polymer flooding, the large pore–throat structure in high-permeability sandstone reservoirs results in effective displacement and less free residual oil; medium-permeability sandstone reservoirs, with medium–large pores and throats, have preferential channels and fine particles blocking the throats, leading to some unswept pores and more free residual oil; low-permeability sandstone reservoirs, with small pores and throats, exhibit weak displacement forces and poor mobility, resulting in more bound residual oil. The distribution and content of clay particles and clay minerals, along with the complex microscopic pore structure, are the main factors causing the differences in the residual oil occurrence states in sandstones with varying permeability.

7 August 2026 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
XSxianda sun
xianda sun
WMWenjun Ma
Wenjun Ma
CHChangxin He
Changxin He
YHYuanjing Huang
Yuanjing Huang
YWYuchen Wang
Yuchen Wang
QGQiansong Guo
Qiansong Guo
The complexity of micrometer-scale pore-throat structures in sandstone reservoirs strongly controls the occurrence state and mobilization degree of residual oil after water-flooding. To clarify the differences in residual oil occurrence between pure oil-zone and transition-zone reservoirs and their microscopic controlling mechanisms, sandstone samples were collected from the SII oil layer group, which belongs to the Upper Cretaceous Yaojia Formation, in the Nanqi area of the Daqing Oilfield, northern Songliao Basin, NE China, and were investigated. Mercury intrusion capillary pressure (MICP), two-dimensional nuclear magnetic resonance (2D NMR), laser scanning confocal microscopy (LSCM), micro-computed tomography (micro-CT), X-ray diffraction (XRD), wettability measurement and fractal analysis were integrated to systematically characterize the pore-throat architecture, mineral composition, seepage capacity, and residual oil occurrence of the two reservoir types. The results show that the pore-throat radius distributions are mainly unimodal. In the pure oil-zone samples, the pore-throat distribution is highly consistent with the corresponding permeability contribution curve, whereas evident deviations occur in some transition-zone samples. Large and medium pore throats exert the most significant control on seepage capacity, and the difference in fractal characteristics is mainly reflected by D1, the fractal dimension of large pore throats. The transition-zone reservoirs generally exhibit moderate to strong water-wet characteristics. Owing to the development of fine pore throats and strong capillary forces, water is prone to retention within pore-throat spaces, resulting in pronounced water-blocking and Jamin effects. After water-flooding, the pure oil-zone reservoirs exhibit lower residual oil saturation, with residual oil occurring mainly in a bound state; in contrast, the transition-zone reservoirs show higher residual oil saturation and relatively high proportions of free and semi-bound residual oil. Mineral composition further modifies pore-throat complexity and residual oil occurrence. D1 is negatively correlated with feldspar content, indicating that increased feldspar content helps improve the pore-throat structure, but positively correlated with clay mineral content, suggesting that clay minerals enhance structural complexity. In the transition-zone reservoirs, kaolinite and illite–smectite mixed-layer minerals are relatively well developed. Their velocity-sensitive and water-sensitive effects readily induce pore-throat blockage and increased flow resistance, which are important causes of residual oil enrichment and difficult oil mobilization in the transition zone.

14 March 2026
Verified
Conference Paper
Open access
YHYuanjing Huang
Yuanjing Huang
The pore structure of tight reservoirs exhibits significant heterogeneity. Understanding the microscopic distribution and occurrence characteristics of tight oil is crucial for optimizing tight oil resource development. This paper focuses on the Copper Bowl Temple Formation gravel reservoir in the Uersun Sag of the Hailar Basin. Through the use of ultra-thin sections and laser scanning confocal microscopy, the distribution and occurrence characteristics of tight oil components in the reservoir were revealed. By integrating thin-section analysis, SEM, and micro-CT, we systematically analyzed how pore networks influence tight oil occurrence. The results show that the gravel reservoir can be classified into two types: grain-supported and matrix-supported frameworks. The occurrence of tight oil in the reservoir is diverse, mainly manifesting as bound-state star-shaped, particle-adsorbed, semi-bound-state fissure-shaped, and free-state cluster-shaped forms. The pore network in the grain-supported framework reservoir is relatively uniform, with good pore connectivity. Intergranular pores are the primary space for oil and gas accumulation, where tight oil primarily occurs in the free-state cluster-shaped and particle-adsorbed forms. In contrast, the matrix-supported framework reservoir has uneven pore distribution, with numerous isolated pores and poor connectivity. In this type of reservoir, tight oil primarily occurs in the bound-state star-shaped and particle-adsorbed forms, with a small amount occurring in the semi-bound-state fissure-shaped form, restricting the development of tight oil.Cluster-shaped oil in intergranular pores exhibits the highest mobility, spanning the broadest pore size distribution (0.33–7.29 μm), followed by the fissure-shaped and particle-adsorbed forms. Star-shaped oil predominantly occurs in isolated pores with the narrowest pore size range (0.28–4.37 μm).

3 May 2026 in Minerals
Verified
Journal Article
Open access
PDF file
LZLing Zhao
Ling Zhao
ZHZhenkai Huang
Zhenkai Huang
XSXin Sui
Xin Sui
XSxianda sun
xianda sun
CXChengwu Xu
Chengwu Xu
歌杨歌 杨
歌 杨
Differential enrichment of shale oil hydrocarbon fractions exerts a fundamental control on the spatial distribution of “sweet spots” and the efficiency of unconventional resource recovery. This study investigates the continental shales of the Upper Es4 Member in the Dongying Sag, Bohai Bay Basin, through an integrated analytical framework combining Laser Scanning Confocal Microscopy (LSCM), Scanning Electron Microscopy (SEM), and high-pressure mercury intrusion. By moving beyond qualitative observations, we characterize the micro-scale partitioning of light and heavy fractions and establish a deterministic hierarchy of controlling factors. Our results indicate the following. (1) Mineral composition functions as a “primary geochemical filter,” where carbonate minerals exhibit a preferential adsorption affinity for light fractions (≤C18), while clay minerals facilitate the selective retention of heavy components (>C18). (2) Pore–throat architecture acts as a “secondary mobility modulator.” A statistically significant linear correlation (R2 = 0.72, p < 0.05) was identified between mean pore diameter and the light-to-heavy fluorescence ratio, suggesting that interconnected macropores in carbonate laminae provide low-resistance conduits for light oil accumulation, whereas isolated mesopores in argillaceous matrices promote heavy-component sequestration. (3) Thermal maturity (Ro) drives a progressive shift in the light-to-heavy ratio, enhancing oil fluidity and regulating the transition from adsorption-dominated to migration-dominated enrichment. This study clarifies the lithofacies-dependent coupling mechanisms between mineral diagenesis and pore-scale fractionation, providing a semi-quantitative conceptual model for shale oil sweet-spot prediction in complex lacustrine basins.