Underground mining of coal seams in the Upper Silesian Coal Basin is currently performed under difficult geological and mining conditions. The mining depth, dislocations (faults and folds) and mining remnants are responsible for rockburst hazard in the highest degree. This hazard can be minimized by using active rockburst prevention, where destress blastings play an important role. Destress blastings in coal seams aim to destress the local stress concentrations. These blastings are usually performed from the longwall face to decrease the stress level ahead of the longwall. An accurate estimation of active rockburst prevention effectiveness is important during mining under disadvantageous geological and mining conditions, which affect the risk of rockburst. Seismic source parameters characterize the focus of tremor, which may be useful in estimating the destress blasting effects. Investigated destress blastings were performed in coal seam no. 507 during its longwall mining in one of the coal mines in the Upper Silesian Coal Basin under difficult geological and mining conditions. The seismic source parameters of the provoked tremors were calculated. The presented preliminary investigations enable a rapid estimation of the destress blasting effectiveness using seismic source parameters, but further analysis in other geological and mining conditions with other blasting parameters is required.

Complex studies were carried out to recognize the fen structure and peat properties in the Całowanie Fen area, belonging to the Natura 2000 network. The studies were conducted in two study areas that differ significantly in terms of peat thickness. Electrical resistivity imaging (ERI) was used to identify the properties of the peat and its substrate, such as thickness and electrical resistivity. Comparison of the field studies with the laboratory tests has shown that the ash content rises electrical resistivity in peat. In addition, the study has shown that the application of non-invasive geophysical methods in protected areas is justified. The fen, as a medium containing mostly water, was a proper test area for the ERI measurements.

This study aims at investigating pre-instrumental tree-ring based winter thermal conditions from Upper Silesia, southern Poland. The Scots pine, pedunculate oak and sessile oak ring widths and the extreme index were used to reconstruct winter mean temperature back to A.D. 1770. The climate response analysis showed that the pine is the most sensitive to February (0.36) and March (0.41) temperature, the oaks were found to be sensitive to the previous December (0.27) and January (0.23) temperature. It was found out that the combination of temperature sensitive species and an additional extreme index in regression can improve the reconstruction, with an emphasis on more reliable reconstruction of extreme values. The elimination of variance reduction and precise reconstruction of actual values of temperature is possible by scaling. The obtained calibration/verification results suggest that, through the application of the long-term composite chronologies a detailed study of the climate variability in Upper Silesia in past centuries can be provided.

We would like to test the concept that induced seismicity prior to relatively large mining tremor (M_L > 2.5, E > 10⁶J) can be inferred from the cumulative Benioff strain release (BSR) as power law time-to-failure before the strong event. This study presents the application of accelerating BSR prior to a large earthquake, widely used in natural seismicity, for analysis of this phenomenon in induced seismicity. The Benioff strain release is quantified as accelerated releases of cumulative (square root sum) of seismic energy in the time series. During the study, five sequences were extracted from the seismic catalogues from two Polish hard coal mines: exhausted Bobrek Mine (data form the IS-EPOS Platform) and from a mine belonging to the Polish Mining Group. Next, a search radius was used to select precursory events and to indicate the type of processes occurring in the coal seam and its vicinity. The fitted power law of cumulative Benioff strain release showed changes of m-parameter. If the value of m was lower than 1.0, the process was regarded as an accelerating-like and if m was higher than 1.0—as a quiescence-like. The investigation of m-parameter vs. the search radius showed the general behaviour of the rock mass in the studied areas and allowed to evaluate the relationship between the critical radius and magnitude of the target event. The obtained scaling relation log(Rc) ~ 0.35 M_L is similar to these reported by other authors who analysed natural seismicity which might suggest that the scaling relation works in a wide range of magnitudes.