This study presents a comprehensive evaluation of an in-house developed current-voltage (I-V) curve tracer compared to the widely used Seaward PV200. Our device, a wireless, microcontroller-based tracer, is designed for precise monitoring of photovoltaic (PV) panels, significantly outperforming the PV200 in speed and measurement quality. Key features include an innovative disconnecting circuit that allows integration into PV strings without disrupting energy production and a control algorithm that evenly distributes measurement points along the I-V curve. Experimental results, obtained under non-uniform irradiation, demonstrate our tracer’s capability to accurately detect operational conditions, such as the activation of bypass diodes. Electroluminescence testing further validated the integrity and performance of the examined panels, emphasizing the importance of advanced instrumentation in enhancing solar energy system efficiency. Our findings highlight substantial advancements in PV diagnosis, offering a robust tool for performance analysis and fostering the development of efficient solar energy solutions.
3 January 2024 in IEEE Transactions on Industrial Electronics
The behavior of a photovoltaic (PV) generator under specific irradiance and temperature conditions is mainly described by its current–voltage (I-V) characteristic. Therefore, the I-V curve tracing has to be considered the most accurate and effective diagnostic tool for the proper identification of PV panels’ failures. In this article, an innovative I-V curve tracer for individual PV panels is presented. It ensures the following advantages. 1) An optimized I-V curve measurement due to an innovative tracing algorithm. 2) In-situ characterization during normal operation owing to a proper disconnection circuit. 3) Full portability thanks to a Li-ion battery power supply and a Bluetooth communication. The proposed tool has been designed and realized. The resulting prototype has been used to measure the I-V curve of a PV panel both in uniform and partial shading conditions.
Identifying underperforming photovoltaic (PV) modules is crucial to ensure optimal energy production and financial returns, as well as preventing potential safety hazards in case of severe damage. To this aim, current–voltage (I-V) curve tracing can be employed as in situ monitoring technique for the early detection of faults. In this paper, we introduce a novel low-cost, microcontroller-based I-V tracer for the diagnosis of individual PV modules. The tool features a unique power conditioning circuit, facilitating accurate data acquisition under static conditions as well as the even distribution of the measured points along the I-V curve. A specific active disconnecting circuit enables in situ and on-line measurement without interrupting the string power generation. The designed prototype is used to characterize a set of PV modules under real operating conditions. The measured I-V curves exhibit expected trends, with the measured data closely matching theoretical values and an estimated mean relative error less than 3%.
In a scenario where the deployment of photovoltaic (PV) systems is increasing, the characterization and the monitoring of the state of health are pivotal. To this aim, Impedance Spectroscopy (IS) provides useful information about the dynamics of PV generators. In this work, an equivalent electric ac model for the characterization of PV modules is discussed. The model is applied to experimental spectra measured on a 52Wp c-Si based PV module in outdoor conditions. The fitting problem is solved by means of two different approaches, one based on the analytic solution of the model equations which employs few points of the experimental spectrum and the other based on an optimization algorithm, requiring the whole set of frequency points. The parameters’ values obtained from both approaches are commented, providing useful information on the behavior of the PV module under test.
To sustain the green transition, the Photovoltaic (PV) source is called to play a relevant role. To this aim the optimal energy yield of PV plants must be ensured by smart monitoring and diagnostics tools based on module-level characterization devices declined as IoT (Internet of Things) sensors. In this paper, the authors discuss the applicability of a I-V (current-voltage) tracer conceived to perform online electrical characterization of individual PV modules, to be adopted also for impedance spectroscopy analysis. Numerical simulation performed in Spice environment proves the applicability of the proposed approach. Nevertheless, challenging design aspects are also highlighted.
In the photovoltaic (PV) sector, ensuring the optimal performance and longevity of modules is vital for maximizing return on investment. One of the critical challenges in PV systems is the occurrence of localized overheating, or hot spots, which can lead to irreversible damage, reduced efficiency, and even fire hazards. This article presents a novel approach to mitigating hot spots at the submodule level through a dual-switch configuration. Unlike traditional bypass diodes, the proposed design features a dynamic bypass and disconnection circuit that adapts to bypass events, disconnecting the affected cells and reconnecting them once the bypass condition ceases. This article details the operation of this circuit and its impact on submodule performance under various shading scenarios. Experimental tests were conducted to compare the proposed solution with a conventional submodule protected by a standard bypass diode, under the worst case scenario of a malfunctioning cell. Infrared thermography was employed to analyze the temperature distribution across the submodules. The results show that, in the submodule with the proposed circuit, the temperature of the faulty cell remains close to that of the other cells, whereas the standard bypass diode causes the shaded cell to overheat significantly. This demonstrates the potential of the proposed design in enhancing PV system reliability, preventing hot spots, and improving thermal management.