The widely held assumption that any important scientific information would be available in English underlies the underuse of non-English-language science across disciplines. However, non-English-language science is expected to bring unique and valuable scientific information, especially in disciplines where the evidence is patchy, and for emergent issues where synthesising available evidence is an urgent challenge. Yet such contribution of non-English-language science to scientific communities and the application of science is rarely quantified. Here, we show that non-English-language studies provide crucial evidence for informing global biodiversity conservation. By screening 419,679 peer-reviewed papers in 16 languages, we identified 1,234 non-English-language studies providing evidence on the effectiveness of biodiversity conservation interventions, compared to 4,412 English-language studies identified with the same criteria. Relevant non-English-language studies are being published at an increasing rate in 6 out of the 12 languages where there were a sufficient number of relevant studies. Incorporating non-English-language studies can expand the geographical coverage (i.e., the number of 2° × 2° grid cells with relevant studies) of English-language evidence by 12% to 25%, especially in biodiverse regions, and taxonomic coverage (i.e., the number of species covered by the relevant studies) by 5% to 32%, although they do tend to be based on less robust study designs. Our results show that synthesising non-English-language studies is key to overcoming the widespread lack of local, context-dependent evidence and facilitating evidence-based conservation globally. We urge wider disciplines to rigorously reassess the untapped potential of non-English-language science in informing decisions to address other global challenges. Please see the Supporting information files for Alternative Language Abstracts.
A dielectric barrier discharge (DBD) in atmospheric pressure air was excited by a high-voltage pulse power supply. Capacitors with different capacitance were connected in the discharge circuit and their effects on discharge power calculation were evaluated. The average power deposited into the discharge were calculated by three different methods: 1) Lissajous figure; 2) product of voltage and current; and 3) watt-hour meter. Further studies showed that the capacitor with 10 nF was suitable for power calculation. At applied voltage of 9 kV, discharge power calculated by three methods were similar (around 25-27 W). However, with the increase of applied voltage, the discharge power obtained by product of voltage and current was far beyond the real value. Lissajous method has proven more appreciable for discharge power calculation in a pulsed plasma at high voltage. This study provides a practical guide for power calculation in a pulsed-driven DBD system.
1 July 2018 in Plasma Sources Science and Technology
An extensive study of CO 2 conversion in a non-thermal, barium titanate packed-bed plasma reactor was conducted to investigate the influence of discharge power, gas flow rate and Ar dilution on the CO 2 conversion, energy efficiency, identity of products and electrical characteristics of the discharge. The maximum energy efficiency in this study (0.29 mmol kJ −1 , i.e. 8.3%) was achieved for a pure CO 2 plasma, whereas the maximum CO 2 conversion (46%) was obtained in a 20/80 CO 2 /Ar plasma. The results also showed that the energy efficiency was approximately constant at a given gas composition regardless of the gas flow rates. In addition, ozone (up to 100 ppm) was detected and its formation was affected by the gas flow rate. The electrical characteristics of the plasma in the packed-bed reactor were deduced using a simplified DBD equivalent model. The electrical characterisation showed that dilution with argon decreased the discharge breakdown voltage resulting in a higher mean electron energy and increased electron density enhancing conversion. The results also indicated that using a lower flow rate can increase the charge transferred per half-cycle of the applied voltage to facilitate the electron-induced CO 2 dissociation, and this effect is more pronounced upon adding Ar.