This paper presents the results of a study on data preprocessing and modeling for predicting corrosion in water pipelines of a steel industrial plant. The use case is a cooling circuit consisting of both direct and indirect cooling. In the direct cooling circuit, water comes into direct contact with the product, whereas in the indirect one, it does not. In this study, advanced machine learning techniques, such as extreme gradient boosting and deep neural networks, have been employed for two distinct applications. Firstly, a virtual sensor was created to estimate the corrosion rate based on influencing process variables, such as pH and temperature. Secondly, a predictive tool was designed to foresee the future evolution of the corrosion rate, considering past values of both influencing variables and the corrosion rate. The results show that the most suitable algorithm for the virtual sensor approach is the dense neural network, with MAPE values of (25 ± 4)% and (11 ± 4)% for the direct and indirect circuits, respectively. In contrast, different results are obtained for the two circuits when following the predictive tool approach. For the primary circuit, the convolutional neural network yields the best results, with MAPE = 4% on the testing set, whereas for the secondary circuit, the LSTM recurrent network shows the highest prediction accuracy, with MAPE = 9%. In general, models employing temporal windows have emerged as more suitable for corrosion prediction, with model performance significantly improving with a larger dataset.
A low-cost smart sensor GNSS system has been developed to provide accurate real-time position and orientation measurements on a floating offshore wind platform. The approach chosen to offer a viable and reliable solution for this application is based on the use of the well-known advantages of the GNSS system as the main driver for enhancing the accuracy of positioning. For this purpose, the data reported in this work are captured through a GNSS receiver operating over multiple frequency bands (L1, L2, L5) and combining signals from different constellations of navigation satellites (GPS, Galileo, and GLONASS), and they are processed through the precise point positioning (PPP) and real-time kinematic (RTK) techniques. Furthermore, aiming to improve global positioning, the processing unit fuses the results obtained with the data acquired through an inertial measurement unit (IMU), reaching final accuracy of a few centimeters. To validate the system designed and developed in this proposal, three different sets of tests were carried out in a (i) rotary table at the laboratory, (ii) GNSS simulator, and (iii) real conditions in an oceanic buoy at sea. The real-time positioning solution was compared to solutions obtained by post-processing techniques in these three scenarios and similar results were satisfactorily achieved.
This study presents the design and validation of a numerical method based on an AI-driven ROM framework for implementing stress virtual sensing. By leveraging Reduced-Order Models (ROMs), the research aims to develop a virtual stress transducer capable of the real-time monitoring of mechanical stresses in mechanical components previously analyzed with high-resolution FEM simulations under a wide range of multiple load scenarios. The ROM is constructed through neural networks trained on Finite Element Method (FEM) outputs from multiple scenarios, resulting in a simplified yet highly accurate model that can be easily implemented digitally. The ANN model achieves a prediction error of for the instantaneous mechanical stress predictions, evaluated over the entire range of stress values (0 to 5.32 MPa) across the component structure. The virtual sensor is capable of producing a quasi-instantaneous, detailed full stress map of the component in just 0.13 s using the ROM, for any combination of 4-load inputs, compared to the 6 min and 31 s required by the FEM. Thus, the approach significantly reduces computational complexity while maintaining a high degree of precision, enabling efficient real-time monitoring. The proposed method’s effectiveness is demonstrated through rigorous ROM validation, underscoring its potential for stress control. This precise AI-driven procedure opens new horizons for predictive maintenance strategies centered on stress cycle monitoring.
The work describes the use of Electrochemical Impedance Spectroscopy (EIS) and Equivalent Circuit Models (ECMs) for predicting the aging of lithium-ion (Li-ion) batteries, in order to accelerate the assessment of battery cells used in space applications. The aging of Li-ion cells can lead to capacity fade, power fade, and safety issues, making it essential to develop techniques for predicting their performance under different operating conditions. The use of machine learning (ML) techniques is also considered crucial for battery research and development due to the high number of variables involved in the problem and the massive amount of data generated daily. The methodology involved in analysing EIS data, selecting suitable datasets and exploiting them to develop representative mathematical models for the cell status at each studied age stage is described here. The text also discusses the use of statistical and machine learning methods for understanding and predicting the state of health of Li-ion batteries based on specific parameters. The results of the study showed that the Cambridge dataset was the most suitable for the analysis of the aging process. On the other hand, the Support Vector Machine for Regression (SVR) and the K-Nearest Neighbors Regression (KNN-Re) methods were selected for training a contrasted correlation model on the study dataset. The feature importance calculation using the permutation importance method revealed that the test temperature was the most important feature for predicting the state of health, followed by Warburg impedance.