Harvesting wind energy from the ambient environment is a feasible method for powering wireless sensors and wireless transmission equipment. Triboelectric nanogenerators (TENGs) have proven to be a stable and promising technology for harvesting ambient wind energy. This study explores a new method for the performance enhancement and practical application of TENGs. An array of flag-type triboelectric nanogenerators (F-TENGs) for harvesting wind energy is proposed. An F-TENG consists of one piece of polytetrafluoroethylene (PTFE) membrane, which has two carbon-coated polyethylene terephthalate (PET) membranes on either side with their edges sealed. The PTFE was pre-ground to increase the initial charge on the surface and to enhance the effective contact area by improving the surface roughness, thus achieving a significant improvement in the output performance. The vertical and horizontal arrays of F-TENGs significantly improved the power output performance. The optimal power output performance was achieved when the vertical parallel distance was approximately 4D/15 (see the main text for the meaning of D), and the horizontal parallel distance was approximately 2D. We found that the peak output voltage and current of a single flag-type TENG of constant size were increased by 255% and 344%, respectively, reaching values of 64 V and 8 μA, respectively.

Vibration measurement and analysis play an important role in diagnosing mechanical faults, but existing vibration sensors are limited by issues such as dependence on external power sources and high costs. To overcome these challenges, the use of triboelectric nanogenerator (TENG)−based vibration sensors has recently attracted attention. These vibration sensors measure a small range of vibration frequencies and are not suitable for measuring high-frequency vibrations. Herein, a self-powered vibration sensor based on an elastic steel triboelectric nanogenerator (ES−TENG) is proposed. By optimizing the elastic steel sheet structure and combining time-frequency transformation and filtering processing methods, the measurement of medium- and high-frequency vibrations is achieved. These results demonstrate that the ES−TENG can perform vibration measurements in the range of 2–10,000 Hz, with a small average error (~0.42%) between the measured frequency and external vibration frequency values. Therefore, the ES−TENG can be used as a self-powered, highly-accurate vibration sensor for intelligent machinery monitoring.

Marine pipeline vibration condition monitoring is a critical and challenging issue, on account of the complex marine environment, while powering the required monitoring sensors remains problematic. This study introduces a vibration sensor based on a ball triboelectric nanogenerator (B-TENG) for marine pipelines condition monitoring. The B-TENG consists of an acrylic cube, polyester rope, aluminum electrodes, and PTFE ball, which converts vibration signals into electrical signals without the need for an external energy supply. The experimental results show that B-TENG can accurately monitor the frequency, amplitude, and direction of vibration in the range of 1–5 Hz with a small error of 0.67%, 4.4%, and 5%, and an accuracy of 0.1 Hz, 0.97 V/mm, and 1.5°, respectively. The hermetically sealed B-TENG can monitor vibration in underwater environments. Therefore, the B-TENG can be used as a cost-effective, self-powered, highly accurate vibration sensor for marine pipeline monitoring.

With the advantages of superior wear resistance, mechanical durability, and stability, the liquid–solid triboelectric nanogenerator (LS-TENG) has been attracting much attention in the field of energy harvesting and self-powered sensors. However, most of the studies on LS-TENG focused on device innovations, changes in solid materials, and the effect of solid properties on output performance, and there is a lack of studies on liquids, especially at the molecular level. A U-tube LS-TENG was assembled to conduct experiments, whereby the effects of molecular structures, including molecular composition, carbon chain length, functional groups and material properties on the output performance were investigated. The deuterium replacing hydrogen and the atomic compositions could not achieve the enhancement of the output performance. Whether the chemical functional groups improve the output performance of LS-TENG depends on the mating solid material. Hydroxyl and cyanogenic groups can improve the output performance for the FEP case, while amide and cyanogenic groups can improve the output performance for the PTFE case. The order of output performances for functional groups of four groups of liquids with both FEP and PTFE materials is also obtained. It was also found that the dielectric constant is not positively correlated with the output performance. The results of this study might provide a reference for the deeper study and application of LS-TENG.

Microfluidic chips made of polydimethylsiloxane (PDMS) have shown significant application potential in aquatic environments with high microbial density, such as “marine ranches”, due to their high-throughput, high-efficiency and high-precision detection capabilities. This technology can rapidly identify pathogenic microorganisms or harmful particles in aquaculture systems, thereby providing urgently needed innovative methods for implementing preventive measures and enhancing aquaculture productivity. By regulating the micro-nano scale channel structure, microfluidic technology can precisely control fluid flow patterns, offering new insights and effective solutions for microbiological research and the separation and analysis of particulate matter. This paper first provides a concise overview of the application of microfluidic chip technology in the analysis of marine microorganisms. Subsequently, it focuses on the “compliance” phenomenon in PDMS-based microfluidic systems, systematically reviewing the potential mechanisms, latest progress and impacts of compliance behavior in mechanically elastic materials such as PDMS. Additionally, this article also investigates the role of “compliance” in key processes of microfluidic technology application, including the capture, separation, enrichment and detection of microorganisms and particles. Moreover, the relationship between surface wettability engineering and compliance phenomena is also explored. We believe that this review will contribute to enhancing the understanding and control of the mechanical behavior of microfluids and the particles they carry within microfluidic systems, providing valuable theoretical insights and practical guidance for researchers in this field.

Since 2015, research on liquid–solid triboelectric nanogenerators (L-S TENGs) has shown steady growth, with the primary focus on application domains such as engineering, physics, materials science, and chemistry. These applications have underscored the significant attention L-S TENGs have garnered in areas like human–nature interaction, energy harvesting, data sensing, and enhancing living conditions. Presently, doping composite dielectric materials and surface modification techniques are the predominant methods for improving the power generation capacity of TENGs, particularly L-S TENGs. However, studies exploring the combined effects of these two approaches to enhance the power generation capacity of TENGs remain relatively scarce. Following a review of existing literature on the use of composite material doping and surface modification to improve the power generation performance of L-S TENGs, this paper proposes an experimental framework termed “self-assembled surface TENG@carbonyl iron particle doping (SAS-TENG@CIP)” to investigate the integrated power generation effects of L-S TENGs when combining these two methods. Research cases and data results indicate that, for TENGs exhibiting capacitor-like properties, the enhancement of power generation performance through composite material doping and superhydrophobic surface modification is not limitless. Each process possesses its own inherent threshold. When these thresholds are surpassed, the percolation of current induced by material doping and electrostatic breakdown (EB) triggered by surface modification can lead to a notable decline in the power output capacity of L-S TENGs. Consequently, in practical applications moving forward, fully realizing the synergistic potential of these methods necessitates a profound understanding of the underlying scientific mechanisms. The conclusions and insights presented in this paper may facilitate their complex integration and contribute to enhancing power generation efficiency in future research.