This paper reports on a self-adaptive energy harvesting system, which is able to adapt its eigenfrequency to the operating conditions of power units. The power required for frequency tuning is delivered by the energy harvester itself. The tuning mechanism is based on a magnetic concept and incorporates a circular tuning magnet and a coupling magnet. In this manner, both coupling modes (attractive and repulsive) can be utilized for tuning the eigenfrequency of the energy harvester. The tuning range and its center frequency can be tailored to the application by careful design of the spring stiffness and the gap between tuning magnet and coupling magnet. Experimental results demonstrate that, in contrast to a conventional non-tunable vibration energy harvester, the net power can be significantly increased if a self-adaptive system is utilized, although additional power is required for regular adjustments of the eigenfrequency. The outcome confirms that active tuning is a real and practical option to extend the operational frequency range and to increase the net power of a conventional vibration energy harvester.
Self-adaptive vibration energy harvesters convert the kinetic energy from vibration sources into electrical energy and continuously adapt their resonance frequency to the vibration frequency. Only when the two frequencies match can the system harvest energy efficiently. The harvesting of vibration sources with a time-variant frequency therefore requires self-adaptive vibration harvesting systems without human intervention. This work presents a self-adaptive energy harvesting system that works completely self-sufficiently. Using magnetic forces, the axial load on a bending beam is changed and thus the resonance frequency is set. The system achieves a relative tuning range of 23% at a center frequency of 36.4 Hz. Within this range, the resonance frequency of the harvester can be set continuously and precisely. With a novel optimized method for frequency measurement and with customized electronics, the system only needs 22 µW to monitor the external vibration frequency and is therefore also suitable for environments with low vibration amplitudes. The system was verified on a vibrational test bench and can easily be tailored to a specific vibration source.
26 July 2018 in Journal of Physics: Conference Series
In order to reduce unscheduled downtimes and maintenance costs, industrial machinery is being fitted with condition-monitoring systems (CMS) that measure important environmental factors and wear parameters of the machine. The electrical power required by these (often retrofitted) sensor systems can be supplied by energy harvesting devices. Pneumatic clutch-brakes provide an excellent application for both CMS and energy harvesting. These industrial machines transmit mechanical power through Kevlar brake pads which wear out due to the large frictional forces at play. The machine accelerates and decelerates from 0 to 1000 rpm and vice versa within 200 ms. This paper reports on energy harvesting devices that can use the large accelerations of the clutch-brake as an energy source to supply the CMS that measures the temperature and wear of the brake pads. A rotary system generates an average power output of 1.5 mW with the machine performing one clutch-brake action every four seconds.