When manual harvesting of sugarcane was discontinued in many regions of Brazil, interest in power generation by burning the bagasse and straw in cogeneration units rose. Exergy analysis is often applied to increase the thermodynamic yield of these plants by identifying irreversibility and work availability. Conversely, pressure for adopting clean energy requires these systems to be evaluated for suitable environmental performance. This study identified and discussed the thermodynamic and environmental effects of scaling up systems that operate according Rankine cycle with reheating. Ten scenarios have been designed considering different levels of steam pressure and addition rates of straw remaining in the sugarcane cultivation. The thermodynamic analysis revealed a 37% improvement in the exergy efficiency and 63% of increasing in power generation to raise the steam pressure from 20 to 100 bar. Moreover, the use of 50% of residual straw into units operating at 100 bar can more than double the amount of electricity exported. If addressed considering a life cycle perspective, the use of straw improves the environmental performance of the cogeneration for Climate Change and Particle Matter Formation but provides additional impacts in terms of Water and Fossil resources depletions.

This study evaluates the energy and environmental performance of a cogeneration system operating simultaneously with bagasse and straw in a rankine cycle. Different process conditions, defined in terms of boiler operating pressure, moisture content and straw addition rate, were analyzed. The combination of these parameters led to the elaboration of one hundred and twenty-five analysis scenarios. The energy profile was based on the energy performance indicator, which is the ratio between the exported electricity and the intrinsic energy of biomass consumed for its generation, and the environmental assessment was performed in terms of climate change. Scenario modeling was developed according to the conceptual framework proposed by the life cycle assessment technique with a 'from cradle-to-gate' coverage. Results indicate that the best energy and environmental performances (energy performance indicator = 0.193 and 688 kg CO2eq/MWh) were obtained with the highest pressure (100 bar) and addition rate (50%), and the lowest moisture content (10%). Moreover, straw moisture has more influence on the system environmental performance than its addition rate.