Dedicated fifth generation (5G) positioning networks are envisaged as a key technology to complement Global Navigation Satellite Systems (GNSS) in challenging situations, such as safety-critical automotive and aerial applications. These 5G networks are explicitly designed to fulfil the positioning needs in a specific environment, by using dedicated pilot signals and locating the base stations (BSs) in favorable conditions for user reception. To prove this concept, the Hybrid Overlay Positioning with 5G and GNSS (HOP-5G) testbed demonstrates the enhanced positioning capabilities resulting from the deployment of ground and aerial BSs. This paper presents a preliminary assessment of the first real-time ranging measurements obtained with a flying BS in a dedicated 5G positioning network. Under hovering and optimal conditions, field results obtained over an 80 MHz downlink bandwidth indicate a ranging precision below 1 m in 95% of cases.
This work presents the initial experimentation of a real-time 5G mmWave downlink positioning testbed deployed at Airbus premises. This experimentation is part of a first-of-a-kind testbed for hybrid Global Navigation Satellite Systems (GNSS), fifth-generation (5G) new radio (NR) and sensor positioning, called the Hybrid Overlay Positioning with 5G and GNSS (HOP-5G) testbed. The mmWave 5G base station (BS) exploits the 5G standard positioning reference signal (PRS) to support positioning capabilities within the 5G NR downlink transmissions. Outdoor field results are used to characterize the received power levels and beam-based angle-of-arrival (AoA) estimation accuracy of this 5G mmWave PRS platform. The goal is to assess the suitability of this platform to enhance the positioning performance thanks to the 5G downlink mmWave transmissions. To the best of the authors’ knowledge, this paper presents the first AoA results using OpenAirInterface (OAI) PRS mmWave signal transmissions at 27 GHz for positioning. These initial field results indicate a maximum coverage of 30 m and an AoA accuracy limited by the reduced array size. The limitations and potential enhancements of this platform are provided as future recommendations.
This paper considers the challenge of localizing ground users with the help of a radio-equipped unmanned aerial vehicle (UAV) that collects measurements from users. We utilize time-of-arrival (ToA) measurements estimated from the radio signals received from users collected by a UAV at different locations. Since the UAV's location might not be perfectly known, the problem becomes about simultaneously localizing the users and tracking the UAV's position. To solve this problem, we employed a least-squares simultaneous localization and mapping (SLAM) framework to fuse ToA data and the estimate of UAV location available from global positioning system (GPS). We verified the performance of the developed algorithm through real-world experimentation.