To meet the European Green Deal targets, the construction sector must improve building thermal performance via advanced insulation systems. Eco-friendly sandwich panels offer a promising solution. Therefore, this work aims to develop and validate a new eco-friendly composite sandwich panel (basalt fibres and recycled extruded polystyrene) with enhanced multifunctionality for lightweight and energy-efficient building façades. Two panels were produced via vacuum infusion—a reference panel and a multifunctional panel incorporating phase change materials (PCMs) and silica aerogels (AGs). Their performance was evaluated through lab-based thermal and acoustic tests, numerical simulations, and on-site monitoring in a living laboratory. The test results from all methods were consistent. The PCM-AG panel showed 16% lower periodic thermal transmittance (0.16 W/(m²K) vs. 0.19 W/(m²K)) and a 92% longer time shift (4.26 h vs. 2.22 h), indicating improved thermal inertia. It also achieved a single-number sound insulation rating of 38 dB. These findings confirm the panel’s potential to reduce operational energy demand and support long-term climate goals.

Este artículo presenta los resultados obtenidos en la investigación realizada durante la ejecución de un diseño de renovación urbana sostenible en la ciudad de Buenaventura, Valle del Cauca, Colombia, como parte de la propuesta del equipo MINGA para el SDLAC 2019 (Solar Decathlon Latin America and Caribbean). Este proyecto fue desarrollado por un grupo de estudiantes y profesores, dentro de los espacios académicos de los programas de pregrado de Arquitectura e Ingeniería Civil de las universidades partícipes del equipo MINGA. Se utilizó la metodología de enseñanza-aprendizaje basada en proyectos, con integración curricular en cursos interdisciplinares tipo taller de proyectos. El objetivo principal fue demostrar la viabilidad de un proyecto de urbanismo resiliente, concebido para el clima futuro en una ciudad costera del trópico cálido-húmedo. Los resultados demostraron que se puede crear un urbanismo climático, resiliente al clima, que garantice la permanencia de los habitantes originales de las zonas costeras, mitigando los riesgos por inundación y garantizando el arraigo cultural de sus habitantes, aun en escenarios de aumento en el nivel del mar

Accurate thermal characterization of building insulation materials is essential for reliable energy performance assessment, regulatory compliance, and the development of high-performance envelopes. On one hand, the growing adoption of innovative insulating products, such as nanoporous materials, aerogel-based composites, bio-based panels, and thin insulating coatings, helps to enhance buildings’ energy efficiency by means of sustainable raw materials. On the other hand, conventional measurement techniques encounter significant challenges, due to their heterogeneity, reduced thickness, and unconventional geometries. In this study, an intra-laboratory comparison of three widely used methods for thermal conductivity determination is presented: the Transient Plane Source (TPS, Hot Disk) method, the Guarded Hot Plate (GHP) method, and the Heat Flow Meter (HFM) method. A total of twelve insulating materials, spanning super-insulating cores, insulating renders, bio-based panels, and nanocomposite coatings, were experimentally characterized under controlled laboratory conditions. A view on the analyzed insulating materials’ cradle-to-grave environmental impact is also given, to enhance the users’ awareness for the highly informed choice. The results highlight systematic differences between transient and steady-state approaches, with TPS measurements generally exhibiting larger deviations for materials characterized by surface roughness, limited thickness, or strong internal heterogeneity. In contrast, GHP and HFM methods show closer agreement when specimen geometry and stabilization requirements are satisfied. The influence of contact resistance, probing depth, specimen preparation, and uncertainty propagation is critically analyzed for each technique. The study provides practical insights into the applicability limits of commonly used thermal characterization methods and emphasizes the importance of selecting measurement techniques in relation to material morphology and testing constraints. These findings support more reliable thermal property assessment of emerging insulation materials and contribute to improved consistency between laboratory measurements and energy performance evaluations for buildings.

This study investigates a Solar Air Heating Façade (SAHF), architecturally enhanced through the integration of granular translucent Silica-Aerogel into multi-wall polycarbonate (PC) panels and the implementation of coated timber lamellas. The novelty of this work lies in the combined evaluation of thermal resistance and solar transmission properties of façade-integrated components, aiming to improve both energy efficiency and architectural integration. Two experimental campaigns were conducted: (i) thermal transmittance tests to determine the U-value of PC panels with and without Silica-Aerogel infill, and (ii) solar transmission measurements under controlled artificial solar radiation to evaluate the optical performance of various lamella configurations and coatings. Results show that the incorporation of Silica-Aerogel reduced the U-value by 41.8%, achieving a minimum of 1.19 W/m² K with the 20 mm thick PC panel, while decreasing the solar transmission of 43–53% depending on the incidence angle. The integration of reflective aluminum-coated timber lamella demonstrated promising results, enabling effective management of solar radiation. These findings highlight the potential of façade systems that combine high-performance insulation with visually integrated shading elements.