The use of Carbon Nanotubes (CNT) and Graphene increased in the last decade and it is likely to keep increasing in the near future. The attractiveness of their properties, particularly the possibility to enhance the composites performance using a tailor made methodology, brings new materials, processes and products for highly demanding industrial applications and to the market. However, there are quite a lot of health/safety issues, as well as lack of understanding and standards to evaluate their effects. This paper starts with a general description of materials, processes and products dealing with CNT and graphene. Then, an overview of concerns related to the health and safety when handling, researching, producing and using products that include these materials is presented. It follows a risk management approach with respect to simulation and evaluation tools, and considering the consensual limits already existing for research, industry and consumers. A general discussion integrating the relevant aspects of health and safety with respect to CNT and graphene is also presented. A proactive view is presented with the intention to contribute with some guidelines on installation, maintenance, evaluation, personal protection equipment (PPE) and personnel training to deal with these carbon-based nanomaterials in research, manufacture, and use with composite materials.

The building sector accounts for 40% of the total energy consumed in Europe at annual basis, together with the relevant Greenhouse Gas (GHG) emissions. In order to mitigate these impacts, the concept and establishment of the Nearly Zero Energy Buildings (NZEBs) is under continuous and intensive research. In fact, as the energy used for buildings’ operation becomes more efficient, impacts resulting from the buildings’ embodied energy become of more importance. Therefore, the selection of building materials and components is of high significance, as these affect the energy performance and potential environmental impacts of the building envelopes. The objective of this study is to perform a preliminary Life Cycle Assessment (LCA) on advanced multifunctional building components, aiming to achieve lower embodied emissions in NZEBs. The advanced components analyzed are composite panels for facade elements of building envelopes, providing thermal efficiency. The design of sustainable building envelope systems is expected to upgrade the overall environmental performance of buildings, including the NZEBs. The findings of this study constitute unambiguous evidence on the need for further research on this topic, as substantial lack of data concerning embodied impacts is presented in literature, adding to the growing discussion on NZEBs at a whole life cycle perspective across Europe. This research has shown that the electricity required from the manufacturing phase of the examined building components is the main contributor to climate change impact and the other environmental categories assessed. Sensitivity analysis that has been performed indicated that the climate change impact is highly depended on the electricity grid energy mix across Europe. Taking into account the current green energy transition by the increase of the renewable energy sources in electricity production, as well as the future upgrade of the manufacturing processes, it is expected that this climate change impact will be mitigated. Finally, the comparison between the CLC thermal insulator and other foam concretes in literature showed that the materials of the building components examined do not present any diversions in terms of environmental impact.

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.