Abdelrahman Gadallah

Dr. Abdelrahman Gadallah

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2024 in Processes
Verified
Journal Article
Open access
PDF file
YMYasmeen A. Mikky
Yasmeen A. Mikky
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
REReham Elaraby
Reham Elaraby
AMA.M.A. Mohamed
A.M.A. Mohamed
AGAbdelrahman Gadallah
Abdelrahman Gadallah
ASAbeer Mahmoud Shoaib
Abeer Mahmoud Shoaib
Biodiesel is a promising alternative fuel that represents a sustainable and environmentally friendly energy source. Due to its complete carbon cycle, it reduces dependence on fossil fuels and lowers greenhouse gas emissions. However, the use of biodiesel in diesel engines is associated with several challenges, including an increase in nitrogen oxide and particulate emissions, incompatibility with cold climates, and lower calorific value. By using nanoparticles as fuel additives, there is a potential to improve the properties of biodiesel and address its shortcomings. In this work, the characteristics of biodiesel derived from waste cooking oil have been enhanced using nanoparticle additives, which result in the usage of a higher percentage of the biodiesel in diesel engines. Nanoparticles of cerium oxide, silicon dioxide, and aluminum oxide have been investigated in different concentrations as biodiesel additives. Two mathematical models are introduced in this work and solved by LINGO optimization software (version 18); the first one seeks to predict the characteristics of biodiesel with nanoparticles in any blend of diesel–biodiesel–nanoparticles, while the second model aims to maximize the biodiesel ratio in a biodiesel–diesel–nanoparticles blend. The application of the combined two models aids in the selection of the optimal nanomaterial that improves the properties of biodiesel and permits an increase in the biodiesel mixing ratio in the fuel. The results show that the best nanoparticle type is cerium oxide at a concentration of 100 ppm, and the optimal mixing ratio of biodiesel blended with CeO2 nanoparticles is 24.892%. An unmodified diesel engine is operated and evaluated with the optimum blend (24.892% biodiesel + 75.108% petrol diesel + 100 ppm CeO2 nanoparticles). It is found that significant improvements in engine performance and emissions compared with the conventional diesel are achieved. The reductions in brake-specific fuel consumption (BSFC), smoke opacity, and carbon monoxide emissions are 24%, 52%, and 30%, respectively.

11 December 2023 in Processes
Verified
Journal Article
Open access
PDF file
WOWalaa S. Osman
Walaa S. Osman
AFAsmaa E. Fadel
Asmaa E. Fadel
SSShazly M. Salem
Shazly M. Salem
ASAbeer Mahmoud Shoaib
Abeer Mahmoud Shoaib
AGAbdelrahman Gadallah
Abdelrahman Gadallah
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
Environmental standards have recently imposed very rigorous limitations on the amounts of benzene, aromatics, and olefins, which can be found in finished gasoline. Reduction of these components could negatively affect the octane number of gasoline, so the isomerization process is gaining importance in the present refining context as an excellent safe alternative to increase the octane number of gasoline. The main aim of the naphtha isomerization unit is to modify the molecular structure of light naphtha to transform it into a more valuable gasoline blend stock, and simultaneously the benzene content is reduced by saturation of the benzene fraction. In this work, Aspen HYSYS version 12.1 is used to simulate the hydrogen once-through isomerization unit of an Egyptian refinery plant, located in Alexandria, in order to determine the properties, composition, and octane number of the isomerate product. Many potential changes are investigated in order to find the best design that efficiently raises octane number with the least amount of expense. Firstly, the plant is modified by adding one fractionator either before or after the reactor, then by adding two fractionators before and after the reactor; then the configuration which gives the highest product octane number with the highest Return on Investment (ROI) is chosen as the recommended optimum configuration. The results show that using two fractionators before and after the reactor is the best configuration. Optimization of this best configuration resulted in an increase in octane number by 7% and a decrease in the total cost by 13%.

26 September 2024 in Gels
Verified
Journal Article
Open access
PDF file
Farid FadhillahFarid Fadhillah
Farid Fadhillah
AAAbdulrahman Ghonaim Alhamzani
Abdulrahman Ghonaim Alhamzani
KBKhaled Bin Bandar
Khaled Bin Bandar
AAAbdullah Alshamari
Abdullah Alshamari
SASaad A. ALjlil
Saad A. ALjlil
MAMona A. Abdel-Fatah
Mona A. Abdel-Fatah
This work aimed to develop an anionic cellulose nanofiber (CNF) bio-adsorbent from date palm tree waste and to investigate its removal efficiency compared to cationic methylene blue dye from contaminated water. Date palm pulp was first prepared from date palm leaves through acid hydrolysis using H2SO4, followed by hydrolysis in a basic medium using KOH, in which the process completely removed the components of hemicellulose, lignin, and silica. To obtain anionic CNF, the resulting pulp was further treated with H2SO4, followed by centrifugation. Biogel formation of the CNF suspension was promoted by sonication, where its removal efficiency of methylene blue dye was studied as a function of dye concentration, temperature, contact time, and pH value. In this work, we investigated two isotherms, i.e., Langmuir and Freundlich. The Langmuir model’s consistency with the experimental data suggests that the adsorption of methylene blue dye onto CNF is monolayer and surface-limited. The reported maximum removal efficiency of 5 mg/g at 60 °C indicates the optimal temperature for adsorption in this specific case. Additionally, a pseudo-second-order model and Elovich model were also utilized to obtain a better understanding of the adsorption mechanism, in which we found not just physical adsorption but also an indication of a chemical reaction occurring between methylene blue dye and CNF. According to the results, that pseudo-second-order model’s consistency with the experimental data suggests that the adsorption of methylene blue (MB) onto CNF is rate-limiting step involving chemisorption between the two. The study reveals that CNF adsorbents derived from renewable natural waste sources such as date palm leaves can be effective in removing cationic contaminants such as methylene blue dye.

25 April 2026 in Nanomaterials
Verified
Journal Article
Open access
PDF file
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
AGAbdelrahman Gadallah
Abdelrahman Gadallah
RARaid Alrowais
Raid Alrowais
Ahmed S. AadliAhmed S. Aadli
Ahmed S. Aadli
AEAhmed S. Elshimy
Ahmed S. Elshimy
A previously unexplored magnetic biocomposite (CMC-HSDs/Fe3O4) was developed through the valorization of hydrophobic scleroprotein discards (HSDs). The synthesized material was evaluated for its efficacy in the adsorption of Cr(VI) and Hg(II) ions from contaminated aqueous systems. The physicochemical properties of the synthesized CMC-HSDs/Fe3O4 nanocomposite were characterized using XRD, FTIR, BET, TG/DTG, FESEM, EDX, and elemental mapping. Subsequently, a Box–Behnken experimental design was employed to model and optimize the adsorption process for Cr(VI) and Hg(II), focusing on the critical parameters of solution pH, adsorbent dosage, and interaction time. Kinetic data were best fitted to the pseudo-first-order (PFO) model. Equilibrium isotherm analysis revealed that Cr(VI) adsorption followed the Langmuir model, while Hg(II) adsorption was better fitted by the Freundlich model. Advanced ionic calculations elucidated a consistent multimolecular adsorption mechanism for both ions, characterized by temperature invariance and a preferential vertical geometry of the adsorbed species. Through a production cost of 25.56 USD/kg, the biosorbent demonstrates excellent reusability, retaining 88.60% efficiency for Cr(VI) and 85.69% for Hg(II) after five adsorption–desorption cycles. Based on a 50 mg/L influent concentration, projected treatment costs are ~$3.50/100 L for Cr(VI) and ~$1.22/100 L for Hg(II), underscoring the nanocomposite’s economic feasibility for industrial deployment in advanced tertiary wastewater remediation.

7 November 2024 in Processes
Verified
Journal Article
Open access
PDF file
FAFatma M. Ayyad
Fatma M. Ayyad
WSWalaa Mahmoud Shehata
Walaa Mahmoud Shehata
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
AGAbdelrahman Gadallah
Abdelrahman Gadallah
ASAbeer Mahmoud Shoaib
Abeer Mahmoud Shoaib
Carbon capture and storage (CCS) is a critical technology used for mitigating climate change by capturing carbon dioxide emissions from industrial sources and storing them underground to prevent their release into the atmosphere. Despite its potential, optimizing CCS systems for cost-effectiveness and efficiency improvement remains a significant challenge. In this paper, the optimization of CCS systems through the development and application of two mathematical optimization techniques is introduced. The first technique is based on using a superstructure optimization model, while the second technique relies on applying a goal programming optimization model. These models were solved using LINGO software version API 14.0.5099.166 to enhance the efficiency and cost-effectiveness of CCS systems. The first model, seeking to maximize the exchange of CO2 flowrate from sources to sinks, achieved a CO2 capture rate of 93.36% with an annual total cost of USD 1.175 billion. The second model introduced a novel mixed-integer non-linear programming (MINLP) approach for multi-objective optimization, targeting the minimization of total system cost, alternative storage, and unutilized storage while maximizing CO2 load exchange. The application of the second model, when prioritized to maximize CO2 flowrate exchange using the goal programming technique, resulted in a cost reduction of 36.46% and a CO2 capture rate of 75.87%. In contrast, when the second model prioritized minimizing the total annual cost, a 48% cost reduction was achieved, and the CO2 capture rate was decreased by 68.37%. A comparison of the two models’ results is presented. The results showed that the second model, with the priority of maximizing CO2 capture, provides the best economic–environmental objective balance, which offers notable cost reductions while keeping an efficient CO2 capture rate. This study highlights the potential of advanced mathematical modeling in increasing the feasibility of CCS as one of the very important strategies of mitigating climate change and reducing global warming.

26 April 2024 in Water
Verified
Journal Article
Open access
PDF file
ASAbeer Mahmoud Shoaib
Abeer Mahmoud Shoaib
AAAmr Ahmed Atawia
Amr Ahmed Atawia
MHMohamed H. Hassanean
Mohamed H. Hassanean
AGAbdelrahman Gadallah
Abdelrahman Gadallah
ABAhmed Abdekader Abdo Bhran
Ahmed Abdekader Abdo Bhran
Controlling the distribution of water and wastewater between industrial processes is vital to rationalize water usage and preserve the environment. In this paper, a mathematical technique is proposed to optimize water–wastewater networks, and a nonlinear program is introduced to minimize the consumption of freshwater and, consequently, the flowrate of wastewater discharge. A general mathematical model, able to handle industrial plants containing up to eight sources and eight sinks, is developed using LINGO optimization software to facilitate dealing with complex case studies. The introduced model can handle single-contaminant networks as well as multiple-contaminant ones. The optimal water network is synthesized through two steps; the first step involves the introduction of the case study data into the developed mathematical model. The second step considers using the optimal solution produced after running the developed LINGO model as feed data for a pre-designed Excel sheet able to deal with these results and simultaneously draw the optimal water–wastewater network. The proposed mathematical model is applied to two case studies. The first case study includes actual data from four fertilizer plants located in Egypt; the water resources and requirements are simultaneously integrated to obtain a sensible cutting in both freshwater consumption (lowered by 52.2%) and wastewater discharge (zero wastewater discharge). The second case study regards a Brazilian petrochemical plant; the obtained results show noticeable reductions in freshwater consumption by 12.3%, while the reduction percentage of wastewater discharge is 4.5%.