A previously unexplored magnetic biocomposite (CMC-HSDs/Fe3O4) was developed through the valorization of hydrophobic scleroprotein discards (HSDs). The synthesized material was evaluated for its efficacy in the adsorption of Cr(VI) and Hg(II) ions from contaminated aqueous systems. The physicochemical properties of the synthesized CMC-HSDs/Fe3O4 nanocomposite were characterized using XRD, FTIR, BET, TG/DTG, FESEM, EDX, and elemental mapping. Subsequently, a Box–Behnken experimental design was employed to model and optimize the adsorption process for Cr(VI) and Hg(II), focusing on the critical parameters of solution pH, adsorbent dosage, and interaction time. Kinetic data were best fitted to the pseudo-first-order (PFO) model. Equilibrium isotherm analysis revealed that Cr(VI) adsorption followed the Langmuir model, while Hg(II) adsorption was better fitted by the Freundlich model. Advanced ionic calculations elucidated a consistent multimolecular adsorption mechanism for both ions, characterized by temperature invariance and a preferential vertical geometry of the adsorbed species. Through a production cost of 25.56 USD/kg, the biosorbent demonstrates excellent reusability, retaining 88.60% efficiency for Cr(VI) and 85.69% for Hg(II) after five adsorption–desorption cycles. Based on a 50 mg/L influent concentration, projected treatment costs are ~$3.50/100 L for Cr(VI) and ~$1.22/100 L for Hg(II), underscoring the nanocomposite’s economic feasibility for industrial deployment in advanced tertiary wastewater remediation.
An alternative two-step process has been disclosed for manufacturing low-density nano-AlF3 from aluminum waste material to achieve sustainability resources preservation. The method involves utilizing spent die-cleaning solution waste as a raw-material, which is a by-product resulting from detaching the attached aluminum metal in the die cast during extrusion process. The first step involves the extraction of aluminum hydroxide (gibbsite) from spent-die cleaning solution through a carbonation process in the presence of specific carbon blocks. The second step involves the conversion of gibbsite to low-density non-gelatinous nano-AlF3 using hydrofluoric acid and ammonia solution. The adding of different volumes of hydrofluoric acid and their effect on aluminum fluoride formation was investigated. The role of polyethylene glycol to form non-gelatinous aluminum fluoride was investigated. The two-step process has been successful in achieving a great demand for cheap sources of raw materials.