Ethan Kerber

Mr. Ethan Kerber

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2024 in Machines
Verified
Journal Article
Open access
PDF file
EKEthan Kerber
Ethan Kerber
HKHeinrich Knitt
Heinrich Knitt
JFJan Luca Fahrendholz-Heiermann
Jan Luca Fahrendholz-Heiermann
EEEmre Ergin
Emre Ergin
SBSigrid Brell-Cokcan
Sigrid Brell-Cokcan
URUwe Reisgen
Uwe Reisgen
In Wire Arc Additive Manufacturing (WAAM), variable layer heights enable the non-parallel or non-planar slicing of parts. In researching variable layer heights, this paper documents printing strategies for a reference geometry whose key features are non-orthogonal growth and unsupported overhangs. The complexity of 3D printing with welding requires parameter optimization to control the deposition of molten material. Thus, 3D printing with welding requires the precise deposition of molten material. Currently, there is no standard solution for the customization of process parameters and intelligent collection of data from sensors. To address this gap in technology, this research develops an Internet of Things (IoT)-enabled, distributed communication protocol to control process parameters, synchronize commands, and integrate device data. To intelligently collect sensor information, this research creates a query-able database during pre-planning and production. This contributes to fundamental research in WAAM by documenting strategies for printing variable layer heights, the customization of control parameters, and the collection of data through a WAAM Information Model (WIM).

7 March 2020 in Construction Robotics
Verified
Journal Article
Open access
PDF file
THT. Heimig
T. Heimig
EKEthan Kerber
Ethan Kerber
SSS. Stumm
S. Stumm
SMS. Mann
S. Mann
URUwe Reisgen
Uwe Reisgen
SBS. Brell-Cokcan
S. Brell-Cokcan
Additive manufacturing enables industries with a new production typology. For the metal manufacturing industry, this new means of production extends the spectrum of achievable building parts that can be fabricated and integrated into architectural designs. Consequently, this process is becoming increasingly relevant for construction industries. The application of additive manufacturing in metal fabrication industries requires high performance technology and extensive knowledge of material and process. Within this paper, we focus on the implementation of incremental point welding as a metal additive arc welding strategy. The goal is the realization and optimization of a manufacturing method which implements adaptive strategies in the control of this production process. In this research, incremental point welding is used for the production of branching structures. Incremental point welding is a type of metal arc additive manufacturing which deposits material by adding individual welding points rather than layering welding seams. This process is interesting for a number of reasons. The incremental application of individual metal drops simplifies the analysis and forecast of residual stress and temperature developments. Consistent arc initialization within point welding is hard to control and, therefore, requires further exploration. This led to the following research in developing an adaptive process. Furthermore, the potential of the process is increased by the possibility of tool-path adaptivity for a robotic system enabling the robot to produce welds at complex approach angles. This research developed a novel approach, able to manufacture complex branching structures while compensating for inaccuracies caused by the welding process using image processing and an adaptive strategy. First experiments showed the possibility to work at a range of overhang angle in addition to multiple approach angles up to 50°. This adaptive process increases the potential application of this technology for the extensions of existing structures as well as repair of metal structures through incremental point welding.

9 December 2023 in Construction Robotics
Verified
Journal Article
Open access
PDF file
EKEthan Kerber
Ethan Kerber
JFJan Luca Fahrendholz-Heiermann
Jan Luca Fahrendholz-Heiermann
SBSigrid Brell-Cokcan
Sigrid Brell-Cokcan
PDPeter Dewald
Peter Dewald
RSRahul Sharma
Rahul Sharma
URUwe Reisgen
Uwe Reisgen
Wire arc additive manufacturing (WAAM) integrates benefits of automation and mass customization to improve efficiency through near-net part production. While WAAM is well researched, there remain significant challenges as the complex relationship between robot, welder, and process parameters can lead to inaccuracy in geometry and variations in material properties. This research proposes a novel framework for quantifying the WAAM process and proposes dynamic adaptive strategies for improving production. This paper introduces the concept of an equivalent contact surface (ECS) for quantifying the additive welding process. Adaptive methods are then identified to optimize WAAM production. In conclusion, this paper provides an outlook on future research directions for continuing the development of this dynamic WAAM process.

19 November 2020 in Construction Robotics
Verified
Journal Article
Open access
PDF file
RDRushi Dai
Rushi Dai
EKEthan Kerber
Ethan Kerber
FRFelix Reuter
Felix Reuter
SSSven Stumm
Sven Stumm
SBSigrid Brell-Cokcan
Sigrid Brell-Cokcan
Data acquisition and transfer are crucial aspects of the digitization and automation of construction workflows. Through the integration of microcontrollers in machinery, a multitude of data can be acquired and analyzed to adapt fabrication processes and optimize performance. The goal of this research was to develop connected multi-functional robotic systems that can transfer data across a wireless network through MQTT, a robust and lightweight IoT communication protocol. This research demonstrates a use case for such interconnected robotic technology by establishing wireless communication through MQTT between a mobile robot and a plasma cutting station. A microcontroller was utilized in the digitization and automation of this steel construction process to obtain, process and transfer the data in a way that was monitorable and storable for managing and optimizing workflows.


27 April 2026 in The International Journal of Advanced Manufacturing Technology
Verified
Journal Article
Open access
PDF file
EKEthan Kerber
Ethan Kerber
RSRahul Sharma
Rahul Sharma
SBSigrid Brell-Cokcan
Sigrid Brell-Cokcan
There is currently no standard framework for traceability to collect data documenting the variables which influence the quality of Wire Arc Additive Manufacturing (WAAM). This work presents a WAAM Information Model (WIM) to enable traceability-informed adaptation. The framework is validated through the printing of a reference geometry, to evaluate the capture of process parameters and assess the impact of a traceability-informed adaptive strategy. Without WIM-based adaptivity, the test printing failed at 15-20 layers. With WIM-based adaptivity, the print was extended to 50-60 layers. The information model tracked the printing process, capturing robot/welder/sensor state data in a hierarchical, structured, and bidirectionally accessible format at a frequency of 2 Hz (every 500 ms). Throughout the testing, 1,555 individual adaptive points with calculated layer heights were captured. The developed model provides modularity, extensibility, and accessibility, enabling access to comprehensive WAAM process analysis in academic research.