The collaborative execution of tasks by multiple Unmanned Ground Vehicles (UGVs) has become a development trend in the field of unmanned systems. Existing collaborative Simultaneous Localization and Mapping (SLAM) frameworks mainly employ methods based on visual–inertial or LiDAR–inertial. However, the use of C-SLAM based on these three types of sensors is relatively less common. Therefore, these systems cannot achieve robust and accurate global localization performance in real-world environments. In order to address this issue, a LiDAR–visual–inertial multi-UGV collaborative SLAM framework is proposed in this paper. The whole system is divided into three parts. The first part constructs a front-end odometry by integrating the raw information from LiDAR, visual, and inertial sensors, which provides the accurate initial pose estimation and local mapping of each UGV for the collaborative system. The second part utilizes the similarity of different local mappings to form a global mapping of the environment. The third part achieves global localization and mapping optimization for multi-UGV localization system. In order to verify the effectiveness of the proposed framework, a series of real-world experiments have been conducted. Over an average trajectory length of 237 m, the framework achieves a mean Absolute Pose Error (APE) of 1.49 m and Relative Pose Error (RPE) of 1.68° after the global optimization. The experimental results demonstrate that the proposed framework achieves superior collaborative localization and mapping performance, with the mean APE reduced by 5.4% and mean RPE reduced by 1.4% compared to other methods.
Pt-based intermetallic compound (IMC) nanoparticles have been considered the most promising catalysts for oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFC). Herein, we propose a strategy for producing ordered Pt3(CoNi) ternary IMC nanoparticles supported on N-doped carbon materials. Particularly, the Co and Ni are originally embedded into ZIF-derived carbon, which diffuse into Pt nanocrystals to form Pt3(CoNi) nanoparticles. Moreover, a thin layer of carbon develops outside of Pt3(CoNi) nanoparticles during the cooling process, which contributes to stabilizing the Pt3(CoNi) on carbon supports. The optimal Pt3(CoNi) nanoparticle catalyst has achieved significantly enhanced activity and stability, exhibiting a half-wave potential of 0.885 V vs reversible hydrogen electrode (RHE) and losing only 16 mV after 10,000 potential cycles between 0.6 and 1.0 V. Unlike the direct-use commercial carbon (VXC-72) for depositing Pt, we utilized ZIF-derived carbon containing dispersed Co and Ni nanocluster or nanoparticles to prepare ordered Pt3(CoNi) intermetallic catalysts.
2 December 2025 in IEEE Internet of Things Journal
Cross-domain data collection in the maritime Internet of Things (IoT) requires coordinated operation between autonomous underwater vehicles (AUVs) and unmanned surface vehicles (USVs). This coordination is challenged by heterogeneous AUVs and USVs, environmental dynamics and uncertainty, stringent energy budgets, and the intrinsic coupling between task allocation and path optimization. These factors jointly degrade collection efficiency, inflate energy consumption, and reduce temporal responsiveness. Distinct from existing studies, we propose an integrated cross-domain path planning and data collection framework that combines a novel dual-mapping Fermat-point method, a learning-based adaptive distributed Kalman filter (LADKF), and an improved multiagent deep deterministic policy gradient (MADDPG) algorithm. By generating the individual AUV trajectories, the dual-mapping Fermat-point method then constructs the USV route, simplifying the original complex dynamic collaboration problem, which enables efficient collaborative task allocation for cross-domain data collection. Concurrently, the LADKF adjusts process and measurement noise covariance online to improve state estimation robustness under complex sea conditions. In addition, the improved MADDPG performs dynamic optimization that jointly accounts for data collection efficiency, energy expenditure, and task completion ratio. Simulation results show that, in scenarios affected by noise and ocean currents, the proposed dual-mapping Fermat-point method and LADKF-MADDPG framework significantly enhance cross-domain cooperative data collection efficiency, reduce energy consumption, and provide reliable support for large-scale maritime IoT deployments.
In this letter, an energy-efficient estimation-oriented sensor scheduling problem over heterogeneous multi-hop sensor networks in cyber-physical systems (CPSs) is studied. Different from most existing literature, we mainly consider the scenario where only local information can be accessed for decision making for each hop, and additionally, different hops may share different power constraints and communication parameters. Based on this, a totally decentralized scheduling scheme has been provided, where a stochastically triggered form is proposed with a Markovian model adopted to formulate the state transition relationship between the adjacent hops. For the propose of calculation of the switching threshold and selection probabilities, an explicit expression for parameters determination is further properly designed to overcome the coupling property between hops. It can be proved that the global optimality can be achieved under our proposed decentralized scheduling scheme, and additionally, capturing conspicuous increase in performance with respect to other baseline schemes. Numerical simulation and comparisons with the random schedule, optimal offline schedule and state-of-the-art method have demonstrated the correctness and effectiveness of our proposed scheduling scheme and theoretical results.