Hard carbon (HC) is considered to be a highly promising anode material for sodium-ion batteries. However, the synthesis conditions and pore structure regulation are still challenging for high-capacity sodium-ion storage. In this study, HCs using polyethylene glycol terephthalate (PET) as a carbon resource and ZnO as a nanopore template were synthesized and systematically investigated. By optimizing the additive amount of zinc gluconate, the starting material for ZnO, PET-derived HCs with a proper mesoporous structure were obtained. The as-prepared hard carbon demonstrated a high reversible capacity of 389.42 mAh·g−1 at 20 mA·g−1, with the plateau capacity accounting for 68%. After 75 cycles, the discharge capacity stabilized at 367.73 mAh·g−1 with a retention ratio of 89.4%. The rate performance test indicated that a proper mesopore structure helped to improve the sodium-ion diffusion coefficient, effectively enhancing the charge–storage kinetics. This work provides a promising strategy for converting PET into valuable carbon materials for application in the field of renewable energy technology.
Waste polyethylene terephthalate (PET) was converted to N/O co-doped mesoporous carbon (NOPC) through carbonization with melamine and MgO. NOPC exhibited excellent catalytic activity for 2e− ORR to produce H2O2 in an electrochemical way.
Pt-based intermetallic compound (IMC) nanoparticles have been considered the most promising catalysts for oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFC). Herein, we propose a strategy for producing ordered Pt3(CoNi) ternary IMC nanoparticles supported on N-doped carbon materials. Particularly, the Co and Ni are originally embedded into ZIF-derived carbon, which diffuse into Pt nanocrystals to form Pt3(CoNi) nanoparticles. Moreover, a thin layer of carbon develops outside of Pt3(CoNi) nanoparticles during the cooling process, which contributes to stabilizing the Pt3(CoNi) on carbon supports. The optimal Pt3(CoNi) nanoparticle catalyst has achieved significantly enhanced activity and stability, exhibiting a half-wave potential of 0.885 V vs reversible hydrogen electrode (RHE) and losing only 16 mV after 10,000 potential cycles between 0.6 and 1.0 V. Unlike the direct-use commercial carbon (VXC-72) for depositing Pt, we utilized ZIF-derived carbon containing dispersed Co and Ni nanocluster or nanoparticles to prepare ordered Pt3(CoNi) intermetallic catalysts.