Guanqun Zhou

Dr. Guanqun Zhou


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 December 2021 in Geofluids
Verified
Journal Article
Open access
PDF file
DHDaiming Hu
Daiming Hu
BTBülent Tezkan
Bülent Tezkan
MYMingxin Yue
Mingxin Yue
XYXiaodong Yang
Xiaodong Yang
XWXiaoping Wu
Xiaoping Wu
GZGuanqun Zhou
Guanqun Zhou
Water inrush in tunneling poses serious harm to safe construction, causing economic losses and casualties. The prediction of water hazards before tunnel excavations becomes an urgent task for governments or enterprises to ensure security. The three-dimensional (3D) direct current (DC) resistivity method is widely used in the forward-probing of tunnels because of its low cost and highly sensitive response to water-bearing structures. However, the different sizes of the tunnel will distort the distribution of the potential field, which causes an inaccurate prediction of water-bearing structures in front of the tunnels. Some studies have pointed out that the tunnel effect must be considered in the quantitative interpretation of the data. However, there is rarely a predicted model considering the tunnel effect to be reported in geophysical literature. We developed a predicted model algorithm by considering the tunnel effect for forward-probing in tunnels. The algorithm is proven to be feasible using a slab analytic model. By simulating a large number of models with different tunnel sizes, we propose an equation, which considers the tunnel effect and can predict the water-bearing structures ahead of the tunnel face. The Monte Carlo method is used to evaluate the quality of the predicted model by simulating and comparing 10,000 random models. The results show that the proposed method is accurate to forecast the water-rich structures with small errors.

28 July 2023 in Natural Resources Research
Verified
Journal Article
Closed access
PDF file
JZJinming Zhang
Jinming Zhang
XHXiaowei Hou
Xiaowei Hou
GZGuanqun Zhou
Guanqun Zhou
YWYingjin Wang
Yingjin Wang
LCLuwang Chen
Luwang Chen
CZChunshan Zheng
Chunshan Zheng

27 December 2022 in Geophysics
Verified
Journal Article
Closed access
QCQianli Cheng
Qianli Cheng
Yongxin GaoYongxin Gao
Yongxin Gao
GZGuanqun Zhou
Guanqun Zhou
Chieh-Hung ChenChieh-Hung Chen
Chieh-Hung Chen
DWDongdong Wang
Dongdong Wang
CYCheng Yao
Cheng Yao
We study seismoelectric waves due to the electrokinetic effect in vertical transversely isotropic (VTI) media. An analytical method is presented for solving 3D seismoelectric waves generated by a point source and numerical simulations are conducted to investigate the characteristics of the seismoelectric waves. The results indicate that three types of seismoelectric signals can be observed, namely, a direct electromagnetic (EM) wave radiated by a seismic source, coseismic electric/magnetic fields accompanying seismic waves (including qP, qSV, and SH waves), and an EM wave converted at an interface from a seismic wave (i.e., the interface seismoelectric response). The seismoelectric signals in a VTI medium have some specific properties different from those in an isotropic medium. For example, a qP wave has a coseismic magnetic response, whereas in an isotropic medium a P wave cannot generate any coseismic magnetic field. All the qP, qSV, and SH waves have a direction dependent or anisotropic ability to generate coseismic electric and magnetic fields. The qP wave has the strongest ability to generate the electric field, 1–3 orders stronger than the qSV and SH waves. The qSV and SH waves have a comparable ability to generate the magnetic field, one order stronger than the qP wave. The results also indicate that the anisotropy in velocity, permeability, and conductivity has great impacts on the interface response. Simulations of an earthquake source demonstrate that the coseismic electric fields are dominated by the qP, qSV, and Rayleigh waves, whereas the coseismic magnetic fields are dominated by the SH and Love waves.

8 November 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
RWRongxin Wu
Rongxin Wu
YWYuze Wu
Yuze Wu
BSbinyang sun
binyang sun
GZGuanqun Zhou
Guanqun Zhou
LZLeilei Zheng
Leilei Zheng
The development height of a water-flowing fractured zone is the key parameter to consider when carrying out mining under water pressure and coal mining with water conservation. In this paper, Jurassic coal seam 3-1 in the Menkeqing Coal Mine was taken as the research target, and a three-dimensional mining geological model was established by using FLAC3D to study the deformation and failure rules of overburden. Three roof boreholes were drilled in the auxiliary transportation roadway of adjacent working faces for dynamic monitoring by the resistivity method, which can better observe the whole process from failure to stability of the overburden. The results show that due to the complex sedimentary environment and large buried depth of coal seams in western China, there is a large deviation between the calculation results of the empirical formula of the fractured zone height under the “Regulations of buildings, water, railway and main well lane leaving coal pillar and press coal mining” (three regulations) and the simulation and on-site measurement. Based on the comprehensive analysis, the influence range of mining advance abutment pressure is approximately 60 m. The height of the water-flowing fractured zone is approximately 106 m, and it is located at the interface between sandy mudstone and mudstone. The height of the caving zone is approximately 22 m, and it is located at the interface between fine sandstone and medium sandstone. The ratio of the fractured height and coal seam thickness (Rf) reached 24.4, which was basically consistent with the test result of the adjacent Yushenfu mining area (which was 26 on average). There is no obvious change in the development height of the caving zone and water-flowing fracture zone from the working face to the drilling borehole position of more than 120 m, which reflects that the height of the overburden failure zone is related to the control of lithological combination.

16 August 2025 in Fractal and Fractional
Verified
Journal Article
Open access
PDF file
GZGuanqun Zhou
Guanqun Zhou
LSLuo Shiling
Luo Shiling
YWYafei Wang
Yafei Wang
Yongxin GaoYongxin Gao
Yongxin Gao
XHXiaowei Hou
Xiaowei Hou
CRChuan Ren
Chuan Ren
Microseismic monitoring has become a critical technology for hydraulic fracturing in unconventional oil and gas reservoirs, owing to its high temporal and spatial resolution. It plays a pivotal role in tracking fracture propagation and evaluating stimulation effectiveness. However, the automatic picking of first-arrival times and accurate source localization remain challenging under complex noise conditions, which constrain the reliability of fracture parameter inversion and reservoir assessment. To address these limitations, we propose a hybrid approach that combines optimized variational mode decomposition (OVMD), wavelet thresholding denoising (WTD), and an adaptive fractal box-counting dimension algorithm for enhanced first-arrival picking and source localization. Specifically, OVMD is first employed to adaptively decompose seismic signals and isolate noise-dominated components. Subsequently, WTD is applied in the multi-scale frequency domain to suppress residual noise. An adaptive fractal dimension strategy is then utilized to detect change points and accurately determine the first-arrival time. These results are used as inputs to a particle swarm optimization (PSO) algorithm for source localization. Both numerical simulations and laboratory experiments demonstrate that the proposed method exhibits high robustness and localization accuracy under severe noise conditions. It significantly outperforms conventional approaches such as short-time Fourier transform (STFT) and continuous wavelet transform (CWT). The proposed framework offers reliable technical support for dynamic fracture monitoring, detailed reservoir characterization, and risk mitigation in the development of unconventional reservoirs.

8 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MYMingxin Yue
Mingxin Yue
GZGuanqun Zhou
Guanqun Zhou
Landslides are one of the primary geological disasters posing significant threats to life and property. Strengthening the monitoring of rainfall-induced landslides is, therefore, crucial. The Direct Resistivity (DC) method can accurately map the subsurface electrical resistivity distribution, making it an essential tool for predicting the position of the slide face. However, when conducting landslide surface DC surveys, various undulating terrains such as ridges and steep slopes often pose accessibility challenges. In such topographies, conventional regular grid measurements become very difficult. Additionally, when the terrain is highly undulating and complex, interpreting apparent resistivity data can lead to erroneous results. In this study, we propose using the DC method to monitor rainfall-induced landslides. By moving away from traditional device setups and utilizing an arbitrary dipole–dipole observation system, we aim to improve efficiency, enhance data resolution, and reduce costs. The resistivity of the slope was found to change significantly during the incubation, formation, and development of a landslide in physical model experiments. Furthermore, the feasibility of our proposed method for assessment rainfall-induced landslides was illustrated by a real case study in South China.