Traditional oil seals are insufficient for the high-speed and bi-directional rotation of new energy electric vehicles. Therefore, we developed a Python program focusing on micro-groove pump seals and examined the unexplored non-contact oil–air biphasic internal end-face seals. Real gas effects were described using the virial and Lucas equations. We introduced an oil–air ratio to determine the equivalent density and viscosity of the two-phase fluid in the seal. Furthermore, we solved the compressible steady-state Reynolds equation using the finite difference method. Analysing the seal’s pumping mechanisms and the effects of operating parameters on sealing performance, we assessed 17 types of hydrodynamic grooves. The results demonstrate that inverse fir tree-like grooves perform well under typical sealing conditions. Under the conditions given in this study, the pumping rate of the optimal groove type compared to other groove types even reached 633.54%. In the oil–air biphasic state, the micro-groove pump seal exerts significant dynamic pressure on the sealing surface. Seal opening force increases with rotational velocity, oil–air ratio, and inlet pressure but decreases with temperature. The pumping rate first increases and then decreases with rotational velocity, increases with oil–air ratio and temperature, and then decreases with inlet pressure. Some special working points require consideration in sealing design. Our results provide insights into designing micro-grooved pumping seals for new energy electric vehicles.
In this work, a new model to analyse the dynamic characteristic coefficient of the S-CO2 dry gas seal was reported. Taking into account that the flow within the S-CO2 dry gas seal is close to adiabatic flow, the impact of the temperature change on the dynamic characteristic coefficient of the gas film cannot be ignored. To address this issue, a complete variable perturbation model (CVPM) under the adiabatic flow process was established using the frequency perturbation method while considering multiple complex effects. Then, the finite difference method was used to solve the CVPM. The gas film’s dynamic stiffness and damping coefficients were calculated and analysed for different conditions, operating parameters, and frequency ratios. From our analysis, it was demonstrated that the dynamic coefficient of the gas film exhibited frequency dependence. The turbulence coefficient perturbation had the most remarkable influence on the gas film’s dynamic coefficient, compared to the temperature, viscosity, and centrifugal inertia force perturbations. The isothermal flow, adiabatic flow, inlet pressure, and inlet temperature also affected the magnitude of the dynamic characteristic coefficient of the gas film. However, no significant impact on their tendency to vary with the frequency ratio was found. Our work provides new theoretical support for the dynamic analysis of S-CO2 dry gas seals, which is of great importance for future applications.
With the growing global demand for clean energy, new energy vehicles are a key focus in the automotive industry. This paper investigates the micro-grooved pumping seal used in such vehicles, using a custom Python computational programme to study the start-up behaviour of a non-contact oil–gas two-phase micro-grooved seal. The research explores the balance of forces during start-up, employing fractal theory for surface contact force calculations and solving the two-phase laminar Reynolds equation by the finite difference method. The results show that high-speed micro-grooved seals perform well under typical conditions for new energy vehicles. When film thickness is below a critical value, fractal dimension and characteristic length influence the initial thickness. Above the critical value, film thickness increases non-linearly with rotational speed, whereas the leakage rate decreases linearly. Critical rotational speed decreases non-linearly with the oil–gas ratio, peaking at an oil–gas ratio of 0.06. Both critical speed and leakage rate increase linearly and non-linearly with pressure and temperature, respectively. The study highlights the boundary-line where leakage transitions to pumping, providing valuable guidance for optimising seal design in new energy vehicles.