Ruqi Yan

Dr. Ruqi Yan

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2024 in Processes
Verified
Journal Article
Open access
PDF file
HCHanqing Chen
Hanqing Chen
RYRuqi Yan
Ruqi Yan
XHXianzhi Hong
Xianzhi Hong
XBXin Bao
Xin Bao
XDXuexing Ding
Xuexing Ding
Traditional oil seals are insufficient for the high-speed and bi-directional rotation of new energy electric vehicles. Therefore, we developed a Python program focusing on micro-groove pump seals and examined the unexplored non-contact oil–air biphasic internal end-face seals. Real gas effects were described using the virial and Lucas equations. We introduced an oil–air ratio to determine the equivalent density and viscosity of the two-phase fluid in the seal. Furthermore, we solved the compressible steady-state Reynolds equation using the finite difference method. Analysing the seal’s pumping mechanisms and the effects of operating parameters on sealing performance, we assessed 17 types of hydrodynamic grooves. The results demonstrate that inverse fir tree-like grooves perform well under typical sealing conditions. Under the conditions given in this study, the pumping rate of the optimal groove type compared to other groove types even reached 633.54%. In the oil–air biphasic state, the micro-groove pump seal exerts significant dynamic pressure on the sealing surface. Seal opening force increases with rotational velocity, oil–air ratio, and inlet pressure but decreases with temperature. The pumping rate first increases and then decreases with rotational velocity, increases with oil–air ratio and temperature, and then decreases with inlet pressure. Some special working points require consideration in sealing design. Our results provide insights into designing micro-grooved pumping seals for new energy electric vehicles.

26 November 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
HCHanqing Chen
Hanqing Chen
RYRuqi Yan
Ruqi Yan
XHXianzhi Hong
Xianzhi Hong
XBXin Bao
Xin Bao
XDXuexing Ding
Xuexing Ding
With the growing global demand for clean energy, new energy vehicles are a key focus in the automotive industry. This paper investigates the micro-grooved pumping seal used in such vehicles, using a custom Python computational programme to study the start-up behaviour of a non-contact oil–gas two-phase micro-grooved seal. The research explores the balance of forces during start-up, employing fractal theory for surface contact force calculations and solving the two-phase laminar Reynolds equation by the finite difference method. The results show that high-speed micro-grooved seals perform well under typical conditions for new energy vehicles. When film thickness is below a critical value, fractal dimension and characteristic length influence the initial thickness. Above the critical value, film thickness increases non-linearly with rotational speed, whereas the leakage rate decreases linearly. Critical rotational speed decreases non-linearly with the oil–gas ratio, peaking at an oil–gas ratio of 0.06. Both critical speed and leakage rate increase linearly and non-linearly with pressure and temperature, respectively. The study highlights the boundary-line where leakage transitions to pumping, providing valuable guidance for optimising seal design in new energy vehicles.

16 December 2024 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Closed access
HCHanqing Chen
Hanqing Chen
RYRuqi Yan
Ruqi Yan
XHXianzhi Hong
Xianzhi Hong
XBXin Bao
Xin Bao
XDXuexing Ding
Xuexing Ding
A micro-grooved pumping seal for electric vehicles was investigated. In this regard, the real gas effect and viscosity were described using the virial and Lucas equations, respectively, and the oil–air ratio was used to determine the equivalent density and viscosity of the two-phase fluid formed in the mixture of the lubricant and air in the seal. The compressible steady-state Reynolds equation was solved using the finite difference method. The pumping mechanisms of the seal and the effects of operating parameters (rotational velocity, oil–air ratio, inlet pressure, and temperature) on the steady-state sealing performance were analysed. The seal produces a significant hydrodynamic effect on the sealing face. The opening force of the seal increases with rotational velocity, oil–air ratio, and inlet pressure. However, the force decreases as temperature increases. The oil–air ratio has the most significant effect on the opening force. The pumping rate first increases and then decreases as the rotational velocity increases. It increases with the oil–air ratio and temperature but decreases as the inlet pressure increases. In particular, the pumping rate reaches a maximum when the rotational velocity or temperature increases to a certain value. This phenomenon requires special attention during seal design. Our results provide input for the design of micro-grooved pumping seals for new energy vehicles.